Home > Products > Air Control Systems > KMACS 5 With Communications

KMACS 5 With Communications



KMACS 5 With Communications

The Kirby Morgan® Air Control System 5 (KMACS 5) is a lightweight, portable control box for use in surface supplied air diving operations.

The KMACS 5 controls the diver's air supply, communications and monitors the diver's depth. It allows two divers clear push-to-talk (two wire) or round robin (four wire) communications. The KMACS 5 is also available without communications.

The air supply can be from either a low pressure compressor or high-pressure cylinders. The KMACS 5's adjustable first stage regulator reduces the high-pressure air and supplies low pressure through the umbilical to the diver's breathing system. High pressure yokes with DIN adapters permit U.S. standard scuba cylinders or DIN valve cylinders to be used. A low pressure air supply fitting allows for a L.P. compressor to be used as the primary air source.

A complete pneumo system with dual reading gauges (both US Standard and Metric) is provided for each diver, as well as a shut-off/bleed system that uses two high-pressure feed lines which allows changing of used cylinders without interruption of the diving operation. Shut off valves allow the isolation of each diver's air supply. The Communication Set is a multipurpose intercommunication system that provides reliable and clear communications between a topside operator (tender) and one or more surface-supported divers, diving bells, personnel transfer capsules (PTC)s, recompression chambers, or other submersible systems. The lightweight, high impact polyethylene plastic case features double wall construction and extra thick corners that ensure exceptional strength and a long work life. An O-ring seal protects hardware from moisture when the case is closed. All latches are stainless steel for maximum work life.


  • 400-046 KMACS-5 w/communication
  • 400-045 KMACS-5 w/no communication
  • KMACS-5


  • KMACS-5 Overhaul Kit
    Part# 425-090
  • Shut Off Valve Kit DCS 2-A
    Shut Off Valve Kit DCS 2-A
    This kit provides shut-off valves for upgrading a DCS-2A (the predecessor of the KMACS-5) that may have been made without this feature. Shut off valves allow the isolation of one divers air supply from the other.
    Part# 425-110
  • Regulator Rebuild Kit KMACS 5 DCS
    Part# 425-120
  • DCS-2 High Pressure Upgrade Kit
    DCS-2 High Pressure Upgrade Kit
    Part# 425-121
  • HP Gauge w/ Bracket
    L.P. Gauge 0-300 PSI, With Bracket
    For pre 2002 DCS-2, 2A's: These will require a mount bracket to install a replacement LP gauge (The current KMACS-5 does not require the purchase of mount brackets along with LP or HP gauges).
    Part# 425-125
  • HP Gauge w/ Bracket
    H.P. Gauge 0-5000 PSI, With Bracket
    For Pre 2002 DCS-2, 2's: These will require a mount bracket to install a replacement HP gauge (The current KMACS-5 does not require the purchase of mount bracket along with HP or LP gauges).
    Part# 425-126
  • O-ring Kit for 455-049 Check Valve
    Part# 425-150
  • O-ring Rebuild Kit
    Part# 425-165