Home > Products > BandMasks > BandMask 28

BandMask 28

Body: 

KMB28 Top Tab

BandMask® 28

see the difference

Configurations

  • 500-028 KMB 28B BandMask w/bare wire posts
  • 500-029 KMB 28B BandMask w/MWPC

Standard Color

  • black
KMB BandMasks

KMB28 Bandmasks Hood and Face Seal

BandMask® 18/28 Face Seal Sizing Instructions

Download the Kirby Morgan BandMask® 18/28 Face Seal Sizing Chart to find your specific combination of hood and face seal sizes.

    • KMB 28 with SuperFlow® 350

    • KMB 28 with 455 Balanced


kmb28_tabber

  • SuperFlow® 350 Regulator
    This all metal, fully adjustable, Commercial Rated™ demand regulator provides easy breathing and excellent performance with low pressure compressors.
  • Air Train
    The air train diffuses incoming breathing air/gas onto the face port/lens to defog and ventilate.
  • Communications
    Communications are “non-modular” (like the SuperLite 17B helmet). When ordered with male waterproof connector (for 4 wire communications), the mask also includes bare wire posts. When ordered with bare wire posts (for 2 wire communications), the port for the mwp connector is plugged.
  • Defogging Steady Flow Valve
    Provides an additional flow of gas into the helmet for ventilation and defogging.
  • Emergency (EGS) Valve
    Supplies backup breathing gas to the diver.
  • Gas Supply Non-Return Valve
    Gas Supply Non-Return Valve prevents loss of gas pressure in the event of umbilical damage, preventing a "squeeze".
  • Head Harness (Spider)
    Keeps the mask in place on the divers head. The neoprene rubber spider has adjustment holes for varying the tension of the harness.
  • Nose Block
    Device allows the diver to block the nose to equalize ears.
  • Side Block
    Multi use side block has additional ports built in to provide controlled air flow, if needed.
  • Silicone Oral Nasal Mask
    Made of a superior silicone material which is hypo-allergenic and has a longer work life than latex.
  • Stainless Steel Bands
    Bands hold the Hood/Face seal in place on the mask frame. They also provide the mounting studs for the Head Harness (Spider).
  • Whisker Wings
    Retrofits to many previous Kirby Morgan Helmets and BandMasks®, has less breathing resistance than the older single valve exhaust while providing an extremely dry hat. The Tri-Valve® Exhaust is made of a chemical resistant compound.