Home > Products > BandMasks > BandMask 28

BandMask 28


KMB28 Top Tab

BandMask® 28

see the difference


  • 500-028 KMB 28B BandMask w/bare wire posts
  • 500-029 KMB 28B BandMask w/MWPC

Standard Color

  • black
KMB BandMasks

KMB28 Bandmasks Hood and Face Seal

BandMask® 18/28 Face Seal Sizing Instructions

Download the Kirby Morgan BandMask® 18/28 Face Seal Sizing Chart to find your specific combination of hood and face seal sizes.

    • KMB 28 with SuperFlow® 350

    • KMB 28 with 455 Balanced


  • face seal
    Replacing Face Seal
    Part# 510-505
  • Communications Kit for all Helmets and Band Masks
    Communications Kit for all Helmets and Band Masks
    Part# 515-033
  • Terminal Block Kit
    Part# 515-061
  • Regulator Flange Kit
    Part# 525-027
  • Whisker Clamp Replacement Kit
    Whisker Clamp Replacement Kit
    Part# 525-032
  • Hot Water Shroud
    Hot Water Shroud Kit for SL Helmets, KM 37/57 & KMB 18/28

    The Hot Water Shroud can be used whenever diving operations are conducted on mixed gas, or when diving in cold water. The shroud helps warm the diver's incoming air, thereby lessening diver's heat loss.

    Part# 525-100
  • Bandkeeper Kit - NO Hood
    Bandkeeper Kit - NO Hood
    Part# 525-121
  • Hood and Band Keeper Kit for KMB 18/28
    Hood and Band Keeper Kit for KMB 18/28
    Part# 525-172
  • Side Block Rebuild Kit
    Side Block Kit
    Part# 525-311
  • Mask Spares Kit, KMB 18/28
    Part# 525-319
  • One Way Valve Kit
    One Way Valve Kit
    Part# 525-330
  • Soft Goods Overhaul Kit, KMB 18/28
    Part# 525-358
  • KMB 18/28 with 455 Regulator Soft Goods Overhaul Kit
    Part# 525-367
  • Anode Kit For The KMB 18/28
    Anode Kit For The KMB 18/28
    Part# 525-373
  • Welding Shield Assembly
    Welding Shield Assembly

    The Welding Shield covers the entire viewport area of your helmet or mask, and accepts a standard 4 x 5 inch weld glass.This welding shield will retrofit to all KMB BandMasks® and SuperLite® helmets using the same mounting holes as the original, smaller, weld lens assembly.

    Part# 525-400
  • Welding Lens Assembly
    Weld Lens Assembly

    The Welding Lens Assembly will fit all SuperLite® Kirby Morgan® Helmets and BandMasks®. The port retainers are supplied with two plug screws which are designed to protect the two threaded holes on the port retainer which are provided for the welding lens assembly.

    There are three densities of lens available:

    Part # 525-405 Lens, Light (#5)

    Part # 525-406 Lens, Medium (#10)

    Part # 525-407 Lens, Dark (#12)

    This assembly is designed to provide visual protection only!

    Part# 525-403
  • Regulator Tool Kit with Pouch
    Tool Kit with Pouch
    Part# 525-620
  • Hood and Face Seal
    KMB 28 Hood and Face Seal (S/S)
    Part# 525-730
  • Hood and Face Seal
    KMB 28 Hood and Face Seal (S/M)
    Part# 525-731
  • Hood and Face Seal
    KMB 28 Hood and Face Seal (L/M)
    Part# 525-732
  • Hood and Face Seal
    KMB 28 Hood and Face Seal (L/L)
    Part# 525-733
  • Tri-Valve® Exhaust Kit
    Tri-Valve® Exhaust Kit
    Part# 525-752
  • 455 Regulator
    Conversion Kit, 455 Regulator for 350/450 Regulators
    Part# 525-765
  • SuperFlow 450
    525-766 Conversion Kit, 450 Regulator
    Divers who wish to upgrade the performance of their Kirby Morgan helmet or Bandmask equipped with the 505-069 or “350” regulator, can do so with the Regulator Conversion Kit, Part # 525-766.
    Part# 525-766
  • SuperFlow® 350 Regulator Assembly Kit
    Part# 525-771
  • Oral Nasal With Lens Retainer Kit
    Oral Nasal With Lens Retainer Kit

    The Lens Retainer Kits are for divers who require eyeglasses. This kit contains P/N 520-538 Lens Retainer, P/N 530-923 Mount Wire and P/N 510-747 Oral Nasal Mask (this oral nasal replaces the previous model P/N 510-690 oral nasal). This kit fits all helmets and BandMasks® equipped with the SuperFlow® 350 and 450 regulators. Take the Lens Retainer to your local optometrist, have them make a set of prescription R/X lenses to fit into the frames, then simply mount them onto your oral nasal P/N 510-747.

    Part# 525-775
  • Lens Retainer Kit
    Lens Retainer Kit
    Part# 525-776