Home > Products > Full Face Masks > EXO-BR Mask

EXO-BR Mask

Error message

  • No longer in production. Spares are available.
Body: 

EXO-BR Top Tab

EXO-BR Mask

The EXO Full Face Mask was designed for both surface supplied and scuba diving.

By enclosing the diver's eyes, nose and mouth, the EXO permits nearly normal speech when used in conjunction with most wireless, and all hardwire underwater communication systems. Its light weight design allows divers to work long dives without jaw or neck fatigue. This mask has a modular communications design that permits rapid and simple maintenance. An optional Hard Shell gives added surfaces for mounting lights, cameras etc. The ear equalization device, a nose block which is adjustable to several different heights, fits a wide variety of noses and faces. The oral nasal helps keep the CO2 levels to a minimum and improves breathing and communications.

The BALANCED REGULATOR EXO-BR was developed to meet strict new European CE requirements.and is fully CE approved as well as U.S. Navy approved. It meets and surpasses EN 250 requirements for regulator performance. The EXO-BR frame is the same safety yellow as the standard SuperLite Helmets and KMB 18 Bandmasks.

The EXO-BR Balanced Regulator helps reduce the work of breathing for the diver. The regulator balances the intermediate air pressure against the valve sealing pressure inside the regulator. This enables the regulator to instantly adjust to changes in line pressure. The Balanced Regulator provides improved breathing and is adjustable for a wide range of intermediate pressures between 100 PSI - 230 PSI.

Configurations

  • 300-036 EXO-BR Mask, No Comms.
  • 300-037 EXO-BR w/Comm. Posts
  • 300-038 EXO-BR w/Comm. MWP
  • EXO-BR Masks

exobr_tabber

  • Manual EXO® 26, All Models
    This is your operations and maintenance manual. It is a writable USB flash drive which enables you to add or subtract the manual PDF sections as they are updated or when you purchase new Kirby Morgan products.
  • EXO-26 Balanced Regulator Full Face Mask User Guide
  • Big Bore (5/16”) Scuba Hose, LP, 29”
  • Diver's Manifold Block
    The Manifold Block Assembly provides a control point for your bailout supply when using a light weight full face mask like the EXO® Mask. It is equipped with four low pressure outlets and a check valve. It is available with a 9/16" O2 fitting or a #6 JIC fitting, or a standard SCUBA fitting.
  • Diver's Manifold Block
    The Manifold Block Assembly provides a control point for your bailout supply when using a light weight full face mask like the EXO® Mask. It is equipped with four low pressure outlets and a check valve. It is available with a 9/16" O2 fitting or a #6 JIC fitting, or a standard SCUBA fitting.
  • Diver's Manifold Block
    The Manifold Block Assembly provides a control point for your bailout supply when using a light weight full face mask like the EXO® Mask. It is equipped with four low pressure outlets and a check valve. It is available with a 9/16" O2 fitting or a #6 JIC fitting, or a standard SCUBA fitting.
  • Hi Flow Air Inlet Swivel
    The high flow swivel allows the regulator hose to move freely and align with the mask without put-ting stress on the hose coupling. It uses standard SCUBA threads for incoming breathing air. The Inlet Swivel is CE approved for the M-48 with CE approved regulators. The Inlet Swivel is provided with masks that are sold with a Kirby Morgan® second stage regulator.
  • Brush, Inlet Tube
  • Standard Scuba Hose, LP, 26”
  • Restrictor Adapter

    The 555-210 Restrictor Adapter should be used when an inflation hose is attached to the side block when drysuit diving. The main purpose of the Restrictor Adapter is to limit gas flow in the event the hose ruptures or is severed, and to ensure the loss of supply would not be great enough to significantly affect the diver’s breathing at moderate to heavy work rates. It also helps prevent filling the dry suit too rapidly.


    NOTE: O-ring 310-003 is required to install the Restrictor Adaptor onto the side block.