Home > Products > Helmets > Kirby Morgan 37

Kirby Morgan 37

Body: 

KM37 Top Tab

Kirby Morgan® 37

see the difference

Configurations

  • 500-050 KM 37 Helmet w/Posts
  • 500-051 KM 37 Helmet w/MWPC

Standard Color

Color Options

(hover over to view color options)


km37_tabber

  • Neck Ring Assembly, Small
    Part# 505-090
  • Neck Ring Assembly
    Neck Ring Assembly, XL
    Part# 505-093
  • Neck Ring Assembly
    Neck Ring Assembly, Latex, Medium-Large
    Part# 505-117
  • Latex Neck Ring Assembly, Small–Medium
    Part# 505-118
  • Neck Ring Assembly
    Neck Ring Assembly, Medium
    Part# 505-119
  • Neck Ring Assembly
    Neck Ring Assembly, Large
    Part# 505-120
  • Replacement Foam Set
    Part# 510-672
  • Cold Water Neck Dam
    Cold Water Neck Dam, Small
    Part# 510-674
  • Communication Assembly with Post
    Communication Assembly with Post
    Part# 515-023
  • Communications Assembly with MWPC
    Communications Assembly with MWPC
    Part# 515-024
  • Communications Kit for all Helmets and Band Masks
    Communications Kit for all Helmets and Band Masks
    Part# 515-033
  • Regulator Flange Kit
    Part# 525-027
  • Whisker Clamp Replacement Kit
    Whisker Clamp Replacement Kit
    Part# 525-032
  • Hot Water Shroud
    Hot Water Shroud Kit for SL Helmets, KM 37/57 & KMB 18/28

    The Hot Water Shroud can be used whenever diving operations are conducted on mixed gas, or when diving in cold water. The shroud helps warm the diver's incoming air, thereby lessening diver's heat loss.

    Part# 525-100
  • Pull Pin Sleeve
    525-112 Pull Pin Sleeve
    This sleeve, created for the 505-110 sealed pull pins (found on all models of KM helmets except the SL 17B & MK 21), is an option to help prevent the knob of the pull pin from snagging or catching on objects or protrusions.
    Part# 525-112
  • Front Standoff Kit
    Part# 525-116
  • Sealed Pull Pin Kit
    Part# 525-210
  • Sealed Pull Pin Overhaul Kit
    Part# 525-211
  • Dry Suit Neck Ring Kit for 17K, SL-27, KM-37, KM-47, and KM-57
    Part# 525-230
  • Regulator Rebuild Kit
    525-309 Regulator Rebuild Kit
    For Helmets & KMB-BandMasks® with the “A”/“B” or SuperFlow® 350 Regulator.
    Part# 525-309
  • Side Block Rebuild Kit
    Side Block Kit
    Part# 525-311
  • One Way Valve Kit
    One Way Valve Kit
    Part# 525-330
  • Helmet Spares Kit, SL 17K and KM 37
    Part# 525-347
  • SL 17C/K, KM 37 and 57 with 455 Regulator Soft Goods Overhaul Kit
    Part# 525-356
  • Soft Goods Overhaul Kit, SL 17C, 17K and KM 37
    Soft Goods Overhaul Kit, SL 17C, 17K and KM 37
    Part# 525-363
  • Anode Kit, SL 17K, 27, KM 37, 47 and 57
    Anode Kit, SL 17K, 27, KM 37, 47 and 57
    Part# 525-374
  • Welding Shield Assembly
    Welding Shield Assembly

    The Welding Shield covers the entire viewport area of your helmet or mask, and accepts a standard 4 x 5 inch weld glass.This welding shield will retrofit to all KMB BandMasks® and SuperLite® helmets using the same mounting holes as the original, smaller, weld lens assembly.

    Part# 525-400
  • Welding Lens Assembly
    Weld Lens Assembly

    The Welding Lens Assembly will fit all SuperLite® Kirby Morgan® Helmets and BandMasks®. The port retainers are supplied with two plug screws which are designed to protect the two threaded holes on the port retainer which are provided for the welding lens assembly.


    There are three densities of lens available:

    Part # 525-405 Lens, Light (#5)

    Part # 525-406 Lens, Medium (#10)

    Part # 525-407 Lens, Dark (#12)


    This assembly is designed to provide visual protection only!

    Part# 525-403
  • Regulator Tool Kit with Pouch
    Tool Kit with Pouch
    Part# 525-620
  • Chin Strap Assembly Kit
    Chin Strap Assembly Kit
    Part# 525-716
  • Bracket Kit for KM 37,47,57 and SL-17K
    Brackets Kit
    Part# 525-717
  • Head Cushion Foam Spacer (HCFS) Kit
    Part# 525-745
  • Replacement Foam Kit for 510-754 Head Cushion
    Part# 525-746
  • Tri-Valve® Exhaust Kit
    Tri-Valve® Exhaust Kit
    Part# 525-752
  • Quad Valve Exhaust Kit
    Quad Valve Exhaust Kit
    Part# 525-759
  • Quad-Valve Cover Kit for SL-17A/B/C/K and 37
    Part# 525-762
  • 455 Regulator
    Conversion Kit, 455 Regulator for 350/450 Regulators
    Part# 525-765
  • SuperFlow 450
    525-766 Conversion Kit, 450 Regulator
    Divers who wish to upgrade the performance of their Kirby Morgan helmet or Bandmask equipped with the 505-069 or “350” regulator, can do so with the Regulator Conversion Kit, Part # 525-766.
    Part# 525-766
  • 525-770 Pull Strap Assembly Kit
    Part# 525-770
  • SuperFlow® 350 Regulator Assembly Kit
    Part# 525-771
  • Oral Nasal With Lens Retainer Kit
    Oral Nasal With Lens Retainer Kit

    The Lens Retainer Kits are for divers who require eyeglasses. This kit contains P/N 520-538 Lens Retainer, P/N 530-923 Mount Wire and P/N 510-747 Oral Nasal Mask (this oral nasal replaces the previous model P/N 510-690 oral nasal). This kit fits all helmets and BandMasks® equipped with the SuperFlow® 350 and 450 regulators. Take the Lens Retainer to your local optometrist, have them make a set of prescription R/X lenses to fit into the frames, then simply mount them onto your oral nasal P/N 510-747.

    Part# 525-775
  • Lens Retainer Kit
    Lens Retainer Kit
    Part# 525-776