Home > Products > Helmets > Kirby Morgan 37SS

Kirby Morgan 37SS

Body: 

KM37ss Top Tab

Kirby Morgan® 37SS

see the difference

Configurations

  • 500-100 KM 37SS Helmet w/Posts
  • 500-101 KM 37SS Helmet w/MWPC

Standard Finish/Color

Note: available in one standard finish/color only.

Stainless Steel Shell

After x-ray inspection, each 316L stainless steel shell, is precision CNC machined to tight tolerances, to ensure proper fit to all other mating parts. The shell is durable and easy to maintain. Easily cleaned using a Scotch Brite® or similar type cleaning pad.

  • KM37SS

km37ss_tabber

This section includes a detailed description of the Kirby Morgan® 37SS, as well as important operational specifications. The Kirby Morgan® 37SS helmet has been tested and conforms to the performance requirements as set forth in Annex II of Directive 89/686/EEC and, as far as applicable, the EN 250:2000, EN 250/A1:2006 and EN 15333-1:2008 (class B). It is fully CE marked with demand regulator SuperFlow® 350 and oral nasals P/N 510-690 and P/N 510-747 (now standard).

Weight:

KM 37SS - 30.96 pounds

Helmet Shell:

Stainless Steel

Control Knobs:

Polyurethane

Face Port/Lens:

Scratch Resistant Polycarbonate

Neck Dam:

Neoprene. Optional latex neck dam available

O-rings:

Buna-N

Head Cushion:

Nylon bag filled with #4 Polyester foam

Recommended Lubricants:

All helmets and masks are lubricated at the factory with Christo-Lube®. Kirby Morgan recommends Christo-Lube® or Tribolube® for all gas train components. Dow Corning® 111 Silicone or equivalent may be used for helmet and mask components that are used with gas mixtures containing less than 50% oxygen.

Regulator:

The SuperFlow® 350 regulator on the Kirby Morgan® 37SS offers high performance. The regulator has been tested at Dive Lab at Panama City, Florida. It meets all current U.S. Navy and European diving standards.

Cage Code:

The cage code for identifying KMDSI products for U.S. government purposes is 58366.

CR Standards:

These helmets meet or exceed all standards established by Dive Lab of Panama City, Florida, and are CR (Commercially Rated) marked.

CE Approved:

The KM 37SS helmet is CE Approved. (view examination certificate) (view declaration w/SuperFlow® 350) (view declaration w/455)

Note

The minimum operating temperature recommended for this helmet is 37 degrees F, only in regards to regulator performance. At the time of this writing, no hot water shroud is available for this helmet for heating the diver’s breathing gas.

Without a hot water shroud, the diver may be subject to hypothermia due to cold gas inspiration temperatures. Kirby Morgan makes no physiological recommendations regarding minimum safe operating temperatures for divers using this helmet.

Usually the greatest danger of demand regulator icing will be encountered on deck when the surrounding air temperature is less than 32°F (0°C). This effect is primarily due to the refrigeration effect of breathing air pressure reduction, and the addition of moisture from the diver's exhalation coming in contact with the topside air temperature.

Recommended overbottom (OB)gas supply pressure for best performance at depths are calculated by the formula (fsw x 0.445+14.7) + recommended p.s.i. g.