Home > Products > Spares Kits

Spares Kits

17B Header

Spares Kits Main

SuperLite® 17B

click to view

Kits_SL17B

  • SL-17 Neck Clamp & Yoke Assemblies
    Part# 505-008
  • Latch Catch Assembly
    Latch Catch Assembly: Pull Pin Type
    Part# 505-010
  • SuperLite 17 Head Cushion Foam Replacement Kit
    Part# 510-523
  • SL-17A/B Neck Dam (pre-'84), Medium
    Part# 510-528
  • SL-17A/B Cold Water Neck Dam (pre-'84), Medium
    Part# 510-531
  • SL-17A/B Drawstring Neck Dam
    Part# 510-533
  • XL Drawstring Neck Dam Installation Procedures
    Part# 510-643
  • Communications Kit for all Helmets and Band Masks
    Communications Kit for all Helmets and Band Masks
    Part# 515-033
  • Terminal Block Kit
    Part# 515-061
  • O-Ring Kit, SL 17B/NS & MK-21
    Part# 525-023
  • Whisker Clamp Replacement Kit
    Whisker Clamp Replacement Kit
    Part# 525-032
  • Hot Water Shroud
    Hot Water Shroud Kit for SL Helmets, KM 37/57 & KMB 18/28

    The Hot Water Shroud can be used whenever diving operations are conducted on mixed gas, or when diving in cold water. The shroud helps warm the diver's incoming air, thereby lessening diver's heat loss.

    Part# 525-100
  • Double Exhaust Kit for 17 A/B/K
    Part# 525-102
  • Double Exhaust Whisker
    Whisker Only, Double Exhaust for 17A/B/K

    For 17B helmets still equipped with the early style double exhaust (instead of the current Quad Valve) replacement double exhaust whiskers are still available.

    Part# 525-103
  • Insert Testing Block Kit
    Part# 525-115
  • Front Weight Kit for SL-17 and MK-21
    Part# 525-130
  • SL 17 Strap Kit
    Chin & Yoke Strap Kit
    The SL-17B Helmet ships with a low profile strap system designed to retain the helmet to the neck clamp/yoke assembly in the event these two main components accidentally become separated.
    Part# 525-234
  • Regulator Rebuild Kit
    525-309 Regulator Rebuild Kit
    For Helmets & KMB-BandMasks® with the “A”/“B” or SuperFlow® 350 Regulator.
    Part# 525-309
  • Side Block Rebuild Kit
    Side Block Kit
    Part# 525-311
  • Helmet Spares Kit for SL-17A/B
    Part# 525-317
  • One Way Valve Kit
    One Way Valve Kit
    Part# 525-330
  • Helmet Spares Kit for SL-17B N/S Mod. 1 Helmets
    Part# 525-345
  • Soft Goods Kit
    Part# 525-360
  • SL-17A/B and SL-17C Anode Kit
    Anode Kit 17B/17C
    Part# 525-376
  • Welding Shield Assembly
    Welding Shield Assembly

    The Welding Shield covers the entire viewport area of your helmet or mask, and accepts a standard 4 x 5 inch weld glass.This welding shield will retrofit to all KMB BandMasks® and SuperLite® helmets using the same mounting holes as the original, smaller, weld lens assembly.

    Part# 525-400
  • Welding Lens Assembly
    Weld Lens Assembly

    The Welding Lens Assembly will fit all SuperLite® Kirby Morgan® Helmets and BandMasks®. The port retainers are supplied with two plug screws which are designed to protect the two threaded holes on the port retainer which are provided for the welding lens assembly.


    There are three densities of lens available:

    Part # 525-405 Lens, Light (#5)

    Part # 525-406 Lens, Medium (#10)

    Part # 525-407 Lens, Dark (#12)


    This assembly is designed to provide visual protection only!

    Part# 525-403
  • Regulator Tool Kit with Pouch
    Tool Kit with Pouch
    Part# 525-620
  • Tri-Valve® Exhaust Kit
    Tri-Valve® Exhaust Kit
    Part# 525-752
  • Quad Valve Exhaust Kit
    Quad Valve Exhaust Kit
    Part# 525-759
  • Quad-Valve Cover Kit for SL-17A/B/C/K and 37
    Part# 525-762
  • SuperFlow® Regulator Assembly Kit
    Part# 525-773
  • Oral Nasal With Lens Retainer Kit
    Oral Nasal With Lens Retainer Kit

    The Lens Retainer Kits are for divers who require eyeglasses. This kit contains P/N 520-538 Lens Retainer, P/N 530-923 Mount Wire and P/N 510-747 Oral Nasal Mask (this oral nasal replaces the previous model P/N 510-690 oral nasal). This kit fits all helmets and BandMasks® equipped with the SuperFlow® 350 and 450 regulators. Take the Lens Retainer to your local optometrist, have them make a set of prescription R/X lenses to fit into the frames, then simply mount them onto your oral nasal P/N 510-747.

    Part# 525-775
  • Lens Retainer Kit
    Lens Retainer Kit
    Part# 525-776
  • ‘A’ Regulator Assembly Kit
    Part# 525-777

SuperLite® 27®

click to view

Kits_SL27

  • Neck Ring Assembly
    Neck Ring Assembly, 27, Small
    Part# 505-094
  • Neck Ring Assembly
    Neck Ring Assembly, 27, Latex
    Part# 505-095
  • Neck Ring Assembly
    Neck Ring Assembly, 27, Large
    Part# 505-097
  • Neck Ring Assembly
    Neck Ring Assembly, 27, Medium
    Part# 505-100
  • Neck Ring Assembly
    Neck Ring Assembly, 27, XL
    Part# 505-104
  • Replacement Foam Set
    Part# 510-672
  • Communication Assembly with Post
    Communication Assembly with Post
    Part# 515-023
  • Communications Assembly with MWPC
    Communications Assembly with MWPC
    Part# 515-024
  • Communications Kit for all Helmets and Band Masks
    Communications Kit for all Helmets and Band Masks
    Part# 515-033
  • Regulator Flange Kit
    Part# 525-027
  • Whisker Clamp Replacement Kit
    Whisker Clamp Replacement Kit
    Part# 525-032
  • Hot Water Shroud
    Hot Water Shroud Kit for SL Helmets, KM 37/57 & KMB 18/28

    The Hot Water Shroud can be used whenever diving operations are conducted on mixed gas, or when diving in cold water. The shroud helps warm the diver's incoming air, thereby lessening diver's heat loss.

    Part# 525-100
  • SL27 Swing Catch
    Swing Catch Retrofit Kit for 27
    Part# 525-106
  • Pull Pin Sleeve
    525-112 Pull Pin Sleeve
    This sleeve, created for the 505-110 sealed pull pins (found on all models of KM helmets except the SL 17B & MK 21), is an option to help prevent the knob of the pull pin from snagging or catching on objects or protrusions.
    Part# 525-112
  • Insert Testing Block Kit
    Part# 525-115
  • Front Standoff Kit
    Part# 525-116
  • Head Cushion Upgrade Kit for 27
    Part# 525-119
  • Sealed Pull Pin Kit
    Part# 525-210
  • Sealed Pull Pin Overhaul Kit
    Part# 525-211
  • Port Weight Kit for SL-27
    Part# 525-220
  • SL-27 Diamond Weight Retrofit Kit
    Part# 525-225
  • Dry Suit Neck Ring Kit for 17K, SL-27, KM-37, KM-47, and KM-57
    Part# 525-230
  • Regulator Rebuild Kit
    525-309 Regulator Rebuild Kit
    For Helmets & KMB-BandMasks® with the “A”/“B” or SuperFlow® 350 Regulator.
    Part# 525-309
  • Side Block Rebuild Kit
    Side Block Kit
    Part# 525-311
  • One Way Valve Kit
    One Way Valve Kit
    Part# 525-330
  • Helmet Spares Kit, SL 27
    Part# 525-333
  • SL 27® with 455 Regulator Soft Goods Overhaul Kit
    Part# 525-359
  • Soft Goods Overhaul Kit, SL 27
    Soft Goods Overhaul Kit, SL 27
    Part# 525-365
  • Anode Kit, SL 17K, 27, KM 37, 47 and 57
    Anode Kit, SL 17K, 27, KM 37, 47 and 57
    Part# 525-374
  • Welding Shield Assembly
    Welding Shield Assembly

    The Welding Shield covers the entire viewport area of your helmet or mask, and accepts a standard 4 x 5 inch weld glass.This welding shield will retrofit to all KMB BandMasks® and SuperLite® helmets using the same mounting holes as the original, smaller, weld lens assembly.

    Part# 525-400
  • Welding Lens Assembly
    Weld Lens Assembly

    The Welding Lens Assembly will fit all SuperLite® Kirby Morgan® Helmets and BandMasks®. The port retainers are supplied with two plug screws which are designed to protect the two threaded holes on the port retainer which are provided for the welding lens assembly.


    There are three densities of lens available:

    Part # 525-405 Lens, Light (#5)

    Part # 525-406 Lens, Medium (#10)

    Part # 525-407 Lens, Dark (#12)


    This assembly is designed to provide visual protection only!

    Part# 525-403
  • Regulator Tool Kit with Pouch
    Tool Kit with Pouch
    Part# 525-620
  • Chin Strap Assembly Kit
    Chin Strap Assembly Kit
    Part# 525-716
  • Head Cushion Foam Spacer (HCFS) Kit
    Part# 525-745
  • Replacement Foam Kit for 510-754 Head Cushion
    Part# 525-746
  • Tri-Valve Exhaust Kit for SL-27
    Tri-Valve Exhaust Kit
    Part# 525-755
  • 525-763 Conversion Kit, 450 Regulator for SL 27®
    Divers who wish to upgrade the performance of their SuperLite-27 can do so with the Regulator Conversion Kit, Part #525-763.
    Part# 525-763
  • 455 Regulator
    Conversion Kit, 455 Regulator for 350/450 Regulators
    Part# 525-765
  • 525-770 Pull Strap Assembly Kit
    Part# 525-770
  • SuperFlow® 350 Regulator Assembly Kit
    Part# 525-771

SuperLite® 17C

click to view

Kits_SL17C

  • Cold Water Neck Dam
    Cold Water Neck Dam, Small
    Part# 510-674
  • Communications Kit for all Helmets and Band Masks
    Communications Kit for all Helmets and Band Masks
    Part# 515-033
  • Terminal Block Kit
    Part# 515-061
  • Regulator Flange Kit
    Part# 525-027
  • Whisker Clamp Replacement Kit
    Whisker Clamp Replacement Kit
    Part# 525-032
  • Hot Water Shroud
    Hot Water Shroud Kit for SL Helmets, KM 37/57 & KMB 18/28

    The Hot Water Shroud can be used whenever diving operations are conducted on mixed gas, or when diving in cold water. The shroud helps warm the diver's incoming air, thereby lessening diver's heat loss.

    Part# 525-100
  • Pull Pin Sleeve
    525-112 Pull Pin Sleeve
    This sleeve, created for the 505-110 sealed pull pins (found on all models of KM helmets except the SL 17B & MK 21), is an option to help prevent the knob of the pull pin from snagging or catching on objects or protrusions.
    Part# 525-112
  • Insert Testing Block Kit
    Part# 525-115
  • Front Standoff Kit
    Part# 525-116
  • Swing Catch Retrofit Kit, SL 17C
    Part# 525-135
  • Sealed Pull Pin Kit
    Part# 525-210
  • Sealed Pull Pin Overhaul Kit
    Part# 525-211
  • Regulator Rebuild Kit
    525-309 Regulator Rebuild Kit
    For Helmets & KMB-BandMasks® with the “A”/“B” or SuperFlow® 350 Regulator.
    Part# 525-309
  • Side Block Rebuild Kit
    Side Block Kit
    Part# 525-311
  • Helmet Spares Kit SL 17C
    Part# 525-322
  • One Way Valve Kit
    One Way Valve Kit
    Part# 525-330
  • SL 17C/K, KM 37 and 57 with 455 Regulator Soft Goods Overhaul Kit
    Part# 525-356
  • Soft Goods Overhaul Kit, SL 17C, 17K and KM 37
    Soft Goods Overhaul Kit, SL 17C, 17K and KM 37
    Part# 525-363
  • SL-17A/B and SL-17C Anode Kit
    Anode Kit 17B/17C
    Part# 525-376
  • Welding Shield Assembly
    Welding Shield Assembly

    The Welding Shield covers the entire viewport area of your helmet or mask, and accepts a standard 4 x 5 inch weld glass.This welding shield will retrofit to all KMB BandMasks® and SuperLite® helmets using the same mounting holes as the original, smaller, weld lens assembly.

    Part# 525-400
  • Welding Lens Assembly
    Weld Lens Assembly

    The Welding Lens Assembly will fit all SuperLite® Kirby Morgan® Helmets and BandMasks®. The port retainers are supplied with two plug screws which are designed to protect the two threaded holes on the port retainer which are provided for the welding lens assembly.


    There are three densities of lens available:

    Part # 525-405 Lens, Light (#5)

    Part # 525-406 Lens, Medium (#10)

    Part # 525-407 Lens, Dark (#12)


    This assembly is designed to provide visual protection only!

    Part# 525-403
  • Regulator Tool Kit with Pouch
    Tool Kit with Pouch
    Part# 525-620
  • Chin Strap Assembly Kit
    Chin Strap Assembly Kit
    Part# 525-716
  • Head Cushion Foam Spacer (HCFS) Kit
    Part# 525-745
  • Replacement Foam Kit for 510-754 Head Cushion
    Part# 525-746
  • Quad Valve Exhaust Kit
    Quad Valve Exhaust Kit
    Part# 525-759
  • Quad-Valve Cover Kit for SL-17A/B/C/K and 37
    Part# 525-762
  • 455 Regulator
    Conversion Kit, 455 Regulator for 350/450 Regulators
    Part# 525-765
  • 525-770 Pull Strap Assembly Kit
    Part# 525-770
  • SuperFlow® 350 Regulator Assembly Kit
    Part# 525-771
  • Oral Nasal With Lens Retainer Kit
    Oral Nasal With Lens Retainer Kit

    The Lens Retainer Kits are for divers who require eyeglasses. This kit contains P/N 520-538 Lens Retainer, P/N 530-923 Mount Wire and P/N 510-747 Oral Nasal Mask (this oral nasal replaces the previous model P/N 510-690 oral nasal). This kit fits all helmets and BandMasks® equipped with the SuperFlow® 350 and 450 regulators. Take the Lens Retainer to your local optometrist, have them make a set of prescription R/X lenses to fit into the frames, then simply mount them onto your oral nasal P/N 510-747.

    Part# 525-775
  • Lens Retainer Kit
    Lens Retainer Kit
    Part# 525-776

Kirby Morgan® 97

click to view

Kits_KM97

  • Neck Ring Assembly
    Neck Ring Assembly, Small, S.S.
    Part# 505-745
  • Neck Ring Assembly
    Neck Ring Assembly, Medium, S.S.
    Part# 505-746
  • Neck Ring Assembly
    Neck Ring Assembly, Large, S.S.
    Part# 505-747
  • Neck Ring Assembly
    Neck Ring Assembly, X-L, S.S.
    Part# 505-749
  • Replacement Foam Set
    Part# 510-672
  • Communication Assembly with Post
    Communication Assembly with Post
    Part# 515-023
  • Communications Assembly with MWPC
    Communications Assembly with MWPC
    Part# 515-024
  • Communications Kit for all Helmets and Band Masks
    Communications Kit for all Helmets and Band Masks
    Part# 515-033
  • Pull Pin Sleeve
    525-112 Pull Pin Sleeve
    This sleeve, created for the 505-110 sealed pull pins (found on all models of KM helmets except the SL 17B & MK 21), is an option to help prevent the knob of the pull pin from snagging or catching on objects or protrusions.
    Part# 525-112
  • Front Standoff Kit
    Part# 525-116
  • Sealed Pull Pin Kit
    Part# 525-210
  • Sealed Pull Pin Overhaul Kit
    Part# 525-211
  • Side Block Rebuild Kit
    Side Block Rebuild Kit
    Part# 525-313
  • One Way Valve Kit
    One Way Valve Kit
    Part# 525-330
  • Soft Goods Kit, KM 97
    Part# 525-364
  • Helmet Spares Kit, KM 97
    Part# 525-370
  • Anode Kit, All SS Helmets
    Anode Kit, All SS Helmets
    Part# 525-375
  • Welding Shield Assembly
    Welding Shield Assembly

    The Welding Shield covers the entire viewport area of your helmet or mask, and accepts a standard 4 x 5 inch weld glass.This welding shield will retrofit to all KMB BandMasks® and SuperLite® helmets using the same mounting holes as the original, smaller, weld lens assembly.

    Part# 525-400
  • Welding Lens Assembly
    Weld Lens Assembly

    The Welding Lens Assembly will fit all SuperLite® Kirby Morgan® Helmets and BandMasks®. The port retainers are supplied with two plug screws which are designed to protect the two threaded holes on the port retainer which are provided for the welding lens assembly.


    There are three densities of lens available:

    Part # 525-405 Lens, Light (#5)

    Part # 525-406 Lens, Medium (#10)

    Part # 525-407 Lens, Dark (#12)


    This assembly is designed to provide visual protection only!

    Part# 525-403
  • 525-630 Tool Kit
    455 Regulator Tool Kit
    Part# 525-630
  • Replacement Foam Kit for 510-754 Head Cushion
    Part# 525-746
  • 455 Regulator
    Conversion Kit, 455 Regulator for 350/450 Regulators
    Part# 525-765
  • 455 Balanced Regulator Rebuild Kit
    Part# 525-767
  • 525-770 Pull Strap Assembly Kit
    Part# 525-770
  • Oral Nasal With Lens Retainer Kit
    Oral Nasal With Lens Retainer Kit

    The Lens Retainer Kits are for divers who require eyeglasses. This kit contains P/N 520-538 Lens Retainer, P/N 530-923 Mount Wire and P/N 510-747 Oral Nasal Mask (this oral nasal replaces the previous model P/N 510-690 oral nasal). This kit fits all helmets and BandMasks® equipped with the SuperFlow® 350 and 450 regulators. Take the Lens Retainer to your local optometrist, have them make a set of prescription R/X lenses to fit into the frames, then simply mount them onto your oral nasal P/N 510-747.

    Part# 525-775
  • Lens Retainer Kit
    Lens Retainer Kit
    Part# 525-776

Kirby Morgan® 77

click to view

Kits_KM77

  • Neck Ring Assembly
    Neck Ring Assembly, Small, S.S.
    Part# 505-745
  • Neck Ring Assembly
    Neck Ring Assembly, Medium, S.S.
    Part# 505-746
  • Neck Ring Assembly
    Neck Ring Assembly, Large, S.S.
    Part# 505-747
  • Neck Ring Assembly
    Neck Ring Assembly, X-L, S.S.
    Part# 505-749
  • Replacement Foam Set
    Part# 510-672
  • Cold Water Neck Dam
    Cold Water Neck Dam, Small
    Part# 510-674
  • Communication Assembly with Post
    Communication Assembly with Post
    Part# 515-023
  • Communications Assembly with MWPC
    Communications Assembly with MWPC
    Part# 515-024
  • Communications Kit for all Helmets and Band Masks
    Communications Kit for all Helmets and Band Masks
    Part# 515-033
  • Pull Pin Sleeve
    525-112 Pull Pin Sleeve
    This sleeve, created for the 505-110 sealed pull pins (found on all models of KM helmets except the SL 17B & MK 21), is an option to help prevent the knob of the pull pin from snagging or catching on objects or protrusions.
    Part# 525-112
  • Front Standoff Kit
    Part# 525-116
  • Sealed Pull Pin Kit
    Part# 525-210
  • Sealed Pull Pin Overhaul Kit
    Part# 525-211
  • Regulator Rebuild Kit, KM 47 and 77
    Regulator Rebuild Kit, KM 47 and 77
    Part# 525-310
  • Side Block Rebuild Kit
    Side Block Rebuild Kit
    Part# 525-313
  • One Way Valve Kit
    One Way Valve Kit
    Part# 525-330
  • Anode Kit, All SS Helmets
    Anode Kit, All SS Helmets
    Part# 525-375
  • Soft Goods Overhaul Kit, KM 77
    Soft Goods Overhaul Kit, KM 77
    Part# 525-377
  • Helmet Spares Kit, KM 77
    Part# 525-378
  • Conversion Kit, 350 Regulator for KM 77
    Conversion Kit, 350 Regulator for KM 77
    Part# 525-385
  • Welding Shield Assembly
    Welding Shield Assembly

    The Welding Shield covers the entire viewport area of your helmet or mask, and accepts a standard 4 x 5 inch weld glass.This welding shield will retrofit to all KMB BandMasks® and SuperLite® helmets using the same mounting holes as the original, smaller, weld lens assembly.

    Part# 525-400
  • Welding Lens Assembly
    Weld Lens Assembly

    The Welding Lens Assembly will fit all SuperLite® Kirby Morgan® Helmets and BandMasks®. The port retainers are supplied with two plug screws which are designed to protect the two threaded holes on the port retainer which are provided for the welding lens assembly.


    There are three densities of lens available:

    Part # 525-405 Lens, Light (#5)

    Part # 525-406 Lens, Medium (#10)

    Part # 525-407 Lens, Dark (#12)


    This assembly is designed to provide visual protection only!

    Part# 525-403
  • Head Cushion Foam Spacer (HCFS) Kit
    Part# 525-745
  • Replacement Foam Kit for 510-754 Head Cushion
    Part# 525-746
  • KM 47-77 Regulator Tool Kit with Pouch
    Regulator Tool Kit with Pouch
    Part# 525-768
  • 455 Regulator
    Conversion Kit, 455 Regulator for KM 77
    Part# 525-769
  • 525-770 Pull Strap Assembly Kit
    Part# 525-770
  • REX 47/77 Regulator Assembly Kit
    Part# 525-774

Kirby Morgan® 57

click to view

Kits_KM57

  • Neck Ring Assembly, Small
    Part# 505-090
  • Neck Ring Assembly
    Neck Ring Assembly, XL
    Part# 505-093
  • Neck Ring Assembly
    Neck Ring Assembly, Latex, Medium-Large
    Part# 505-117
  • Latex Neck Ring Assembly, Small–Medium
    Part# 505-118
  • Neck Ring Assembly
    Neck Ring Assembly, Medium
    Part# 505-119
  • Neck Ring Assembly
    Neck Ring Assembly, Large
    Part# 505-120
  • Replacement Foam Set
    Part# 510-672
  • Cold Water Neck Dam
    Cold Water Neck Dam, Small
    Part# 510-674
  • Communication Assembly with Post
    Communication Assembly with Post
    Part# 515-023
  • Communications Assembly with MWPC
    Communications Assembly with MWPC
    Part# 515-024
  • Communications Kit for all Helmets and Band Masks
    Communications Kit for all Helmets and Band Masks
    Part# 515-033
  • Whisker Clamp Replacement Kit
    Whisker Clamp Replacement Kit
    Part# 525-032
  • Hot Water Shroud
    Hot Water Shroud Kit for SL Helmets, KM 37/57 & KMB 18/28

    The Hot Water Shroud can be used whenever diving operations are conducted on mixed gas, or when diving in cold water. The shroud helps warm the diver's incoming air, thereby lessening diver's heat loss.

    Part# 525-100
  • Pull Pin Sleeve
    525-112 Pull Pin Sleeve
    This sleeve, created for the 505-110 sealed pull pins (found on all models of KM helmets except the SL 17B & MK 21), is an option to help prevent the knob of the pull pin from snagging or catching on objects or protrusions.
    Part# 525-112
  • Front Standoff Kit
    Part# 525-116
  • Sealed Pull Pin Kit
    Part# 525-210
  • Sealed Pull Pin Overhaul Kit
    Part# 525-211
  • Soft Goods Overhaul Kit, KM 57
    525-217 Soft Goods Overhaul Kit for 57
    Part# 525-217
  • 525-218 Helmet Spares Kit for KM 57
    Part# 525-218
  • Dry Suit Neck Ring Kit for 17K, SL-27, KM-37, KM-47, and KM-57
    Part# 525-230
  • Side Block Rebuild Kit
    Side Block Kit
    Part# 525-311
  • One Way Valve Kit
    One Way Valve Kit
    Part# 525-330
  • SL 17C/K, KM 37 and 57 with 455 Regulator Soft Goods Overhaul Kit
    Part# 525-356
  • Anode Kit, SL 17K, 27, KM 37, 47 and 57
    Anode Kit, SL 17K, 27, KM 37, 47 and 57
    Part# 525-374
  • Welding Shield Assembly
    Welding Shield Assembly

    The Welding Shield covers the entire viewport area of your helmet or mask, and accepts a standard 4 x 5 inch weld glass.This welding shield will retrofit to all KMB BandMasks® and SuperLite® helmets using the same mounting holes as the original, smaller, weld lens assembly.

    Part# 525-400
  • Welding Lens Assembly
    Weld Lens Assembly

    The Welding Lens Assembly will fit all SuperLite® Kirby Morgan® Helmets and BandMasks®. The port retainers are supplied with two plug screws which are designed to protect the two threaded holes on the port retainer which are provided for the welding lens assembly.


    There are three densities of lens available:

    Part # 525-405 Lens, Light (#5)

    Part # 525-406 Lens, Medium (#10)

    Part # 525-407 Lens, Dark (#12)


    This assembly is designed to provide visual protection only!

    Part# 525-403
  • Chin Strap Assembly Kit
    Chin Strap Assembly Kit
    Part# 525-716
  • Bracket Kit for KM 37,47,57 and SL-17K
    Brackets Kit
    Part# 525-717
  • Regulator Rebuild Kit, SS Balanced
    Regulator Rebuild Kit, SS Balanced
    Part# 525-718
  • Head Cushion Foam Spacer (HCFS) Kit
    Part# 525-745
  • Replacement Foam Kit for 510-754 Head Cushion
    Part# 525-746
  • SuperFlow® 450 Regulator Parts Upgrade Kit
    Part# 525-757
  • Quad Valve Exhaust Kit
    Quad Valve Exhaust Kit
    Part# 525-759
  • Quad-Valve Cover Kit for SL-17A/B/C/K and 37
    Part# 525-762
  • 455 Regulator
    Conversion Kit, 455 Regulator for 350/450 Regulators
    Part# 525-765
  • 525-770 Pull Strap Assembly Kit
    Part# 525-770
  • Oral Nasal With Lens Retainer Kit
    Oral Nasal With Lens Retainer Kit

    The Lens Retainer Kits are for divers who require eyeglasses. This kit contains P/N 520-538 Lens Retainer, P/N 530-923 Mount Wire and P/N 510-747 Oral Nasal Mask (this oral nasal replaces the previous model P/N 510-690 oral nasal). This kit fits all helmets and BandMasks® equipped with the SuperFlow® 350 and 450 regulators. Take the Lens Retainer to your local optometrist, have them make a set of prescription R/X lenses to fit into the frames, then simply mount them onto your oral nasal P/N 510-747.

    Part# 525-775
  • Lens Retainer Kit
    Lens Retainer Kit
    Part# 525-776

Kirby Morgan® 47

click to view

Kits_KM47

  • Neck Ring Assembly, Small
    Part# 505-090
  • Neck Ring Assembly
    Neck Ring Assembly, XL
    Part# 505-093
  • Neck Ring Assembly
    Neck Ring Assembly, Latex, Medium-Large
    Part# 505-117
  • Latex Neck Ring Assembly, Small–Medium
    Part# 505-118
  • Neck Ring Assembly
    Neck Ring Assembly, Medium
    Part# 505-119
  • Neck Ring Assembly
    Neck Ring Assembly, Large
    Part# 505-120
  • Replacement Foam Set
    Part# 510-672
  • Cold Water Neck Dam
    Cold Water Neck Dam, Small
    Part# 510-674
  • Communication Assembly with Post
    Communication Assembly with Post
    Part# 515-023
  • Communications Assembly with MWPC
    Communications Assembly with MWPC
    Part# 515-024
  • Communications Kit for all Helmets and Band Masks
    Communications Kit for all Helmets and Band Masks
    Part# 515-033
  • Pull Pin Sleeve
    525-112 Pull Pin Sleeve
    This sleeve, created for the 505-110 sealed pull pins (found on all models of KM helmets except the SL 17B & MK 21), is an option to help prevent the knob of the pull pin from snagging or catching on objects or protrusions.
    Part# 525-112
  • Front Standoff Kit
    Part# 525-116
  • Sealed Pull Pin Kit
    Part# 525-210
  • Sealed Pull Pin Overhaul Kit
    Part# 525-211
  • Dry Suit Neck Ring Kit for 17K, SL-27, KM-37, KM-47, and KM-57
    Part# 525-230
  • Regulator Rebuild Kit, KM 47 and 77
    Regulator Rebuild Kit, KM 47 and 77
    Part# 525-310
  • Side Block Rebuild Kit
    Side Block Kit
    Part# 525-311
  • One Way Valve Kit
    One Way Valve Kit
    Part# 525-330
  • Soft Goods Overhaul Kit, KM 47
    Soft Goods Overhaul Kit, KM 47
    Part# 525-368
  • Helmet Spares Kit, KM 47
    Part# 525-371
  • Anode Kit, SL 17K, 27, KM 37, 47 and 57
    Anode Kit, SL 17K, 27, KM 37, 47 and 57
    Part# 525-374
  • Welding Shield Assembly
    Welding Shield Assembly

    The Welding Shield covers the entire viewport area of your helmet or mask, and accepts a standard 4 x 5 inch weld glass.This welding shield will retrofit to all KMB BandMasks® and SuperLite® helmets using the same mounting holes as the original, smaller, weld lens assembly.

    Part# 525-400
  • Welding Lens Assembly
    Weld Lens Assembly

    The Welding Lens Assembly will fit all SuperLite® Kirby Morgan® Helmets and BandMasks®. The port retainers are supplied with two plug screws which are designed to protect the two threaded holes on the port retainer which are provided for the welding lens assembly.


    There are three densities of lens available:

    Part # 525-405 Lens, Light (#5)

    Part # 525-406 Lens, Medium (#10)

    Part # 525-407 Lens, Dark (#12)


    This assembly is designed to provide visual protection only!

    Part# 525-403
  • Chin Strap Assembly Kit
    Chin Strap Assembly Kit
    Part# 525-716
  • Bracket Kit for KM 37,47,57 and SL-17K
    Brackets Kit
    Part# 525-717
  • Head Cushion Foam Spacer (HCFS) Kit
    Part# 525-745
  • Replacement Foam Kit for 510-754 Head Cushion
    Part# 525-746
  • REX® Whisker Exhaust Kit
    Part# 525-764
  • KM 47-77 Regulator Tool Kit with Pouch
    Regulator Tool Kit with Pouch
    Part# 525-768
  • 525-770 Pull Strap Assembly Kit
    Part# 525-770
  • REX 47/77 Regulator Assembly Kit
    Part# 525-774

Kirby Morgan® 37SS

click to view

Kits_KM37SS

  • Neck Ring Assembly
    Neck Ring Assembly, Small, S.S.
    Part# 505-745
  • Neck Ring Assembly
    Neck Ring Assembly, Medium, S.S.
    Part# 505-746
  • Neck Ring Assembly
    Neck Ring Assembly, Large, S.S.
    Part# 505-747
  • Neck Ring Assembly
    Neck Ring Assembly, X-L, S.S.
    Part# 505-749
  • Replacement Foam Set
    Part# 510-672
  • Cold Water Neck Dam
    Cold Water Neck Dam, Small
    Part# 510-674
  • Communication Assembly with Post
    Communication Assembly with Post
    Part# 515-023
  • Communications Assembly with MWPC
    Communications Assembly with MWPC
    Part# 515-024
  • Communications Kit for all Helmets and Band Masks
    Communications Kit for all Helmets and Band Masks
    Part# 515-033
  • Regulator Flange Kit
    Part# 525-027
  • Whisker Clamp Replacement Kit
    Whisker Clamp Replacement Kit
    Part# 525-032
  • Pull Pin Sleeve
    525-112 Pull Pin Sleeve
    This sleeve, created for the 505-110 sealed pull pins (found on all models of KM helmets except the SL 17B & MK 21), is an option to help prevent the knob of the pull pin from snagging or catching on objects or protrusions.
    Part# 525-112
  • Front Standoff Kit
    Part# 525-116
  • Sealed Pull Pin Kit
    Part# 525-210
  • Sealed Pull Pin Overhaul Kit
    Part# 525-211
  • Regulator Rebuild Kit
    525-309 Regulator Rebuild Kit
    For Helmets & KMB-BandMasks® with the “A”/“B” or SuperFlow® 350 Regulator.
    Part# 525-309
  • Side Block Rebuild Kit
    Side Block Rebuild Kit
    Part# 525-313
  • One Way Valve Kit
    One Way Valve Kit
    Part# 525-330
  • Anode Kit, All SS Helmets
    Anode Kit, All SS Helmets
    Part# 525-375
  • Soft Goods Overhaul Kit, KM 37SS
    Soft Goods Overhaul Kit, KM 37SS
    Part# 525-380
  • Helmet Spares Kit, KM 37SS
    Part# 525-381
  • Conversion Kit, REX Regulator for 37SS
    Part# 525-395
  • Welding Shield Assembly
    Welding Shield Assembly

    The Welding Shield covers the entire viewport area of your helmet or mask, and accepts a standard 4 x 5 inch weld glass.This welding shield will retrofit to all KMB BandMasks® and SuperLite® helmets using the same mounting holes as the original, smaller, weld lens assembly.

    Part# 525-400
  • Welding Lens Assembly
    Weld Lens Assembly

    The Welding Lens Assembly will fit all SuperLite® Kirby Morgan® Helmets and BandMasks®. The port retainers are supplied with two plug screws which are designed to protect the two threaded holes on the port retainer which are provided for the welding lens assembly.


    There are three densities of lens available:

    Part # 525-405 Lens, Light (#5)

    Part # 525-406 Lens, Medium (#10)

    Part # 525-407 Lens, Dark (#12)


    This assembly is designed to provide visual protection only!

    Part# 525-403
  • Regulator Tool Kit with Pouch
    Tool Kit with Pouch
    Part# 525-620
  • Head Cushion Foam Spacer (HCFS) Kit
    Part# 525-745
  • Replacement Foam Kit for 510-754 Head Cushion
    Part# 525-746
  • 455 Regulator
    Conversion Kit, 455 Regulator for 350/450 Regulators
    Part# 525-765
  • 525-770 Pull Strap Assembly Kit
    Part# 525-770
  • SuperFlow® 350 Regulator Assembly Kit
    Part# 525-771
  • Oral Nasal With Lens Retainer Kit
    Oral Nasal With Lens Retainer Kit

    The Lens Retainer Kits are for divers who require eyeglasses. This kit contains P/N 520-538 Lens Retainer, P/N 530-923 Mount Wire and P/N 510-747 Oral Nasal Mask (this oral nasal replaces the previous model P/N 510-690 oral nasal). This kit fits all helmets and BandMasks® equipped with the SuperFlow® 350 and 450 regulators. Take the Lens Retainer to your local optometrist, have them make a set of prescription R/X lenses to fit into the frames, then simply mount them onto your oral nasal P/N 510-747.

    Part# 525-775
  • Lens Retainer Kit
    Lens Retainer Kit
    Part# 525-776

Kirby Morgan® 37

click to view

Kits_KM37

  • Neck Ring Assembly, Small
    Part# 505-090
  • Neck Ring Assembly
    Neck Ring Assembly, XL
    Part# 505-093
  • Neck Ring Assembly
    Neck Ring Assembly, Latex, Medium-Large
    Part# 505-117
  • Latex Neck Ring Assembly, Small–Medium
    Part# 505-118
  • Neck Ring Assembly
    Neck Ring Assembly, Medium
    Part# 505-119
  • Neck Ring Assembly
    Neck Ring Assembly, Large
    Part# 505-120
  • Replacement Foam Set
    Part# 510-672
  • Cold Water Neck Dam
    Cold Water Neck Dam, Small
    Part# 510-674
  • Communication Assembly with Post
    Communication Assembly with Post
    Part# 515-023
  • Communications Assembly with MWPC
    Communications Assembly with MWPC
    Part# 515-024
  • Communications Kit for all Helmets and Band Masks
    Communications Kit for all Helmets and Band Masks
    Part# 515-033
  • Regulator Flange Kit
    Part# 525-027
  • Whisker Clamp Replacement Kit
    Whisker Clamp Replacement Kit
    Part# 525-032
  • Hot Water Shroud
    Hot Water Shroud Kit for SL Helmets, KM 37/57 & KMB 18/28

    The Hot Water Shroud can be used whenever diving operations are conducted on mixed gas, or when diving in cold water. The shroud helps warm the diver's incoming air, thereby lessening diver's heat loss.

    Part# 525-100
  • Pull Pin Sleeve
    525-112 Pull Pin Sleeve
    This sleeve, created for the 505-110 sealed pull pins (found on all models of KM helmets except the SL 17B & MK 21), is an option to help prevent the knob of the pull pin from snagging or catching on objects or protrusions.
    Part# 525-112
  • Front Standoff Kit
    Part# 525-116
  • Sealed Pull Pin Kit
    Part# 525-210
  • Sealed Pull Pin Overhaul Kit
    Part# 525-211
  • Dry Suit Neck Ring Kit for 17K, SL-27, KM-37, KM-47, and KM-57
    Part# 525-230
  • Regulator Rebuild Kit
    525-309 Regulator Rebuild Kit
    For Helmets & KMB-BandMasks® with the “A”/“B” or SuperFlow® 350 Regulator.
    Part# 525-309
  • Side Block Rebuild Kit
    Side Block Kit
    Part# 525-311
  • One Way Valve Kit
    One Way Valve Kit
    Part# 525-330
  • Helmet Spares Kit, SL 17K and KM 37
    Part# 525-347
  • SL 17C/K, KM 37 and 57 with 455 Regulator Soft Goods Overhaul Kit
    Part# 525-356
  • Soft Goods Overhaul Kit, SL 17C, 17K and KM 37
    Soft Goods Overhaul Kit, SL 17C, 17K and KM 37
    Part# 525-363
  • Anode Kit, SL 17K, 27, KM 37, 47 and 57
    Anode Kit, SL 17K, 27, KM 37, 47 and 57
    Part# 525-374
  • Welding Shield Assembly
    Welding Shield Assembly

    The Welding Shield covers the entire viewport area of your helmet or mask, and accepts a standard 4 x 5 inch weld glass.This welding shield will retrofit to all KMB BandMasks® and SuperLite® helmets using the same mounting holes as the original, smaller, weld lens assembly.

    Part# 525-400
  • Welding Lens Assembly
    Weld Lens Assembly

    The Welding Lens Assembly will fit all SuperLite® Kirby Morgan® Helmets and BandMasks®. The port retainers are supplied with two plug screws which are designed to protect the two threaded holes on the port retainer which are provided for the welding lens assembly.


    There are three densities of lens available:

    Part # 525-405 Lens, Light (#5)

    Part # 525-406 Lens, Medium (#10)

    Part # 525-407 Lens, Dark (#12)


    This assembly is designed to provide visual protection only!

    Part# 525-403
  • Regulator Tool Kit with Pouch
    Tool Kit with Pouch
    Part# 525-620
  • Chin Strap Assembly Kit
    Chin Strap Assembly Kit
    Part# 525-716
  • Bracket Kit for KM 37,47,57 and SL-17K
    Brackets Kit
    Part# 525-717
  • Head Cushion Foam Spacer (HCFS) Kit
    Part# 525-745
  • Replacement Foam Kit for 510-754 Head Cushion
    Part# 525-746
  • Tri-Valve® Exhaust Kit
    Tri-Valve® Exhaust Kit
    Part# 525-752
  • Quad Valve Exhaust Kit
    Quad Valve Exhaust Kit
    Part# 525-759
  • Quad-Valve Cover Kit for SL-17A/B/C/K and 37
    Part# 525-762
  • 455 Regulator
    Conversion Kit, 455 Regulator for 350/450 Regulators
    Part# 525-765
  • SuperFlow 450
    525-766 Conversion Kit, 450 Regulator
    Divers who wish to upgrade the performance of their Kirby Morgan helmet or Bandmask equipped with the 505-069 or “350” regulator, can do so with the Regulator Conversion Kit, Part # 525-766.
    Part# 525-766
  • 525-770 Pull Strap Assembly Kit
    Part# 525-770
  • SuperFlow® 350 Regulator Assembly Kit
    Part# 525-771
  • Oral Nasal With Lens Retainer Kit
    Oral Nasal With Lens Retainer Kit

    The Lens Retainer Kits are for divers who require eyeglasses. This kit contains P/N 520-538 Lens Retainer, P/N 530-923 Mount Wire and P/N 510-747 Oral Nasal Mask (this oral nasal replaces the previous model P/N 510-690 oral nasal). This kit fits all helmets and BandMasks® equipped with the SuperFlow® 350 and 450 regulators. Take the Lens Retainer to your local optometrist, have them make a set of prescription R/X lenses to fit into the frames, then simply mount them onto your oral nasal P/N 510-747.

    Part# 525-775
  • Lens Retainer Kit
    Lens Retainer Kit
    Part# 525-776

BandMask 28®

click to view

kits_KMB28

  • face seal
    Replacing Face Seal
    Part# 510-505
  • Communications Kit for all Helmets and Band Masks
    Communications Kit for all Helmets and Band Masks
    Part# 515-033
  • Terminal Block Kit
    Part# 515-061
  • Regulator Flange Kit
    Part# 525-027
  • Whisker Clamp Replacement Kit
    Whisker Clamp Replacement Kit
    Part# 525-032
  • Hot Water Shroud
    Hot Water Shroud Kit for SL Helmets, KM 37/57 & KMB 18/28

    The Hot Water Shroud can be used whenever diving operations are conducted on mixed gas, or when diving in cold water. The shroud helps warm the diver's incoming air, thereby lessening diver's heat loss.

    Part# 525-100
  • Bandkeeper Kit - NO Hood
    Bandkeeper Kit - NO Hood
    Part# 525-121
  • Hood and Band Keeper Kit for KMB 18/28
    Hood and Band Keeper Kit for KMB 18/28
    Part# 525-172
  • Side Block Rebuild Kit
    Side Block Kit
    Part# 525-311
  • Mask Spares Kit, KMB 18/28
    Part# 525-319
  • One Way Valve Kit
    One Way Valve Kit
    Part# 525-330
  • Soft Goods Overhaul Kit, KMB 18/28
    Part# 525-358
  • KMB 18/28 with 455 Regulator Soft Goods Overhaul Kit
    Part# 525-367
  • Anode Kit For The KMB 18/28
    Anode Kit For The KMB 18/28
    Part# 525-373
  • Welding Shield Assembly
    Welding Shield Assembly

    The Welding Shield covers the entire viewport area of your helmet or mask, and accepts a standard 4 x 5 inch weld glass.This welding shield will retrofit to all KMB BandMasks® and SuperLite® helmets using the same mounting holes as the original, smaller, weld lens assembly.

    Part# 525-400
  • Welding Lens Assembly
    Weld Lens Assembly

    The Welding Lens Assembly will fit all SuperLite® Kirby Morgan® Helmets and BandMasks®. The port retainers are supplied with two plug screws which are designed to protect the two threaded holes on the port retainer which are provided for the welding lens assembly.


    There are three densities of lens available:

    Part # 525-405 Lens, Light (#5)

    Part # 525-406 Lens, Medium (#10)

    Part # 525-407 Lens, Dark (#12)


    This assembly is designed to provide visual protection only!

    Part# 525-403
  • Regulator Tool Kit with Pouch
    Tool Kit with Pouch
    Part# 525-620
  • Hood and Face Seal
    KMB 28 Hood and Face Seal (S/S)
    Part# 525-730
  • Hood and Face Seal
    KMB 28 Hood and Face Seal (S/M)
    Part# 525-731
  • Hood and Face Seal
    KMB 28 Hood and Face Seal (L/M)
    Part# 525-732
  • Hood and Face Seal
    KMB 28 Hood and Face Seal (L/L)
    Part# 525-733
  • Tri-Valve® Exhaust Kit
    Tri-Valve® Exhaust Kit
    Part# 525-752
  • 455 Regulator
    Conversion Kit, 455 Regulator for 350/450 Regulators
    Part# 525-765
  • SuperFlow 450
    525-766 Conversion Kit, 450 Regulator
    Divers who wish to upgrade the performance of their Kirby Morgan helmet or Bandmask equipped with the 505-069 or “350” regulator, can do so with the Regulator Conversion Kit, Part # 525-766.
    Part# 525-766
  • SuperFlow® 350 Regulator Assembly Kit
    Part# 525-771
  • Oral Nasal With Lens Retainer Kit
    Oral Nasal With Lens Retainer Kit

    The Lens Retainer Kits are for divers who require eyeglasses. This kit contains P/N 520-538 Lens Retainer, P/N 530-923 Mount Wire and P/N 510-747 Oral Nasal Mask (this oral nasal replaces the previous model P/N 510-690 oral nasal). This kit fits all helmets and BandMasks® equipped with the SuperFlow® 350 and 450 regulators. Take the Lens Retainer to your local optometrist, have them make a set of prescription R/X lenses to fit into the frames, then simply mount them onto your oral nasal P/N 510-747.

    Part# 525-775
  • Lens Retainer Kit
    Lens Retainer Kit
    Part# 525-776

BandMask 18®

click to view

Kits_KMB18

  • face seal
    Replacing Face Seal
    Part# 510-505
  • Communications Kit for all Helmets and Band Masks
    Communications Kit for all Helmets and Band Masks
    Part# 515-033
  • Terminal Block Kit
    Part# 515-061
  • Regulator Flange Kit
    Part# 525-027
  • Whisker Clamp Replacement Kit
    Whisker Clamp Replacement Kit
    Part# 525-032
  • Hot Water Shroud
    Hot Water Shroud Kit for SL Helmets, KM 37/57 & KMB 18/28

    The Hot Water Shroud can be used whenever diving operations are conducted on mixed gas, or when diving in cold water. The shroud helps warm the diver's incoming air, thereby lessening diver's heat loss.

    Part# 525-100
  • Insert Testing Block Kit
    Part# 525-115
  • Bandkeeper Kit - NO Hood
    Bandkeeper Kit - NO Hood
    Part# 525-121
  • Hood and Band Keeper Kit for KMB 18/28
    Hood and Band Keeper Kit for KMB 18/28
    Part# 525-172
  • Regulator Rebuild Kit
    525-309 Regulator Rebuild Kit
    For Helmets & KMB-BandMasks® with the “A”/“B” or SuperFlow® 350 Regulator.
    Part# 525-309
  • Side Block Rebuild Kit
    Side Block Kit
    Part# 525-311
  • Mask Spares Kit, KMB 18/28
    Part# 525-319
  • One Way Valve Kit
    One Way Valve Kit
    Part# 525-330
  • Soft Goods Overhaul Kit, KMB 18/28
    Part# 525-358
  • KMB 18/28 with 455 Regulator Soft Goods Overhaul Kit
    Part# 525-367
  • Anode Kit For The KMB 18/28
    Anode Kit For The KMB 18/28
    Part# 525-373
  • Welding Shield Assembly
    Welding Shield Assembly

    The Welding Shield covers the entire viewport area of your helmet or mask, and accepts a standard 4 x 5 inch weld glass.This welding shield will retrofit to all KMB BandMasks® and SuperLite® helmets using the same mounting holes as the original, smaller, weld lens assembly.

    Part# 525-400
  • Welding Lens Assembly
    Weld Lens Assembly

    The Welding Lens Assembly will fit all SuperLite® Kirby Morgan® Helmets and BandMasks®. The port retainers are supplied with two plug screws which are designed to protect the two threaded holes on the port retainer which are provided for the welding lens assembly.


    There are three densities of lens available:

    Part # 525-405 Lens, Light (#5)

    Part # 525-406 Lens, Medium (#10)

    Part # 525-407 Lens, Dark (#12)


    This assembly is designed to provide visual protection only!

    Part# 525-403
  • Regulator Tool Kit with Pouch
    Tool Kit with Pouch
    Part# 525-620
  • Hood and Face Seal
    KMB 18 Hood and Face Seal (S/S)
    Part# 525-734
  • Hood and Face Seal
    KMB 18 Hood and Face Seal (S/M)
    Part# 525-735
  • Hood and Face Seal
    KMB 18 Hood and Face Seal (L/M)
    Part# 525-736
  • Hood and Face Seal
    KMB 18 Hood and Face Seal (L/L)
    Part# 525-737
  • Tri-Valve® Exhaust Kit
    Tri-Valve® Exhaust Kit
    Part# 525-752
  • 455 Regulator
    Conversion Kit, 455 Regulator for 350/450 Regulators
    Part# 525-765
  • SuperFlow 450
    525-766 Conversion Kit, 450 Regulator
    Divers who wish to upgrade the performance of their Kirby Morgan helmet or Bandmask equipped with the 505-069 or “350” regulator, can do so with the Regulator Conversion Kit, Part # 525-766.
    Part# 525-766
  • SuperFlow® 350 Regulator Assembly Kit
    Part# 525-771
  • Oral Nasal With Lens Retainer Kit
    Oral Nasal With Lens Retainer Kit

    The Lens Retainer Kits are for divers who require eyeglasses. This kit contains P/N 520-538 Lens Retainer, P/N 530-923 Mount Wire and P/N 510-747 Oral Nasal Mask (this oral nasal replaces the previous model P/N 510-690 oral nasal). This kit fits all helmets and BandMasks® equipped with the SuperFlow® 350 and 450 regulators. Take the Lens Retainer to your local optometrist, have them make a set of prescription R/X lenses to fit into the frames, then simply mount them onto your oral nasal P/N 510-747.

    Part# 525-775
  • Lens Retainer Kit
    Lens Retainer Kit
    Part# 525-776
  • ‘A’ Regulator Assembly Kit
    Part# 525-777