Home > Support > Bulletins > 2014 > Bulletin # 04 of 2014

Bulletin # 04 of 2014

Interior Title: 
Bulletin #4 of 2014
Title Type: 
Maintenance & Repair Bulletin
Bulletin Date: 
Bulletin #4 of 2014. May 30, 2014 UPDATED March 31, 2015
Bulletin Type: 
Maintenance & Repair Bulletin
Bulletin Subject: 
Cleaning And Brightening Stainless Steel Shells
Products Affected: 
Stainless Steel Helmet Shells (P/N 560-517) and Pods (P/Ns 560-556, -516).
Body: 

Kirby Morgan Dive Systems has found, tested, and approved a set of products for cleaning and brightening the stainless steel shells (P/N 560-517) and Pods (P/Ns 560-556, -516) of the KM 77, KM 37SS and KM 97 Helmets. These parts are composed of 316L grade, highly corrosive resistant stainless steel.

BIO-CIRCLE www.biocircle.com

Produces two products, E-NOX Clean and UNO SF, that when used in a two-step process, remove mineral deposits, “rust” like discolorations, foreign material oxidation, light grease and also clean and brighten the stainless steel helmet shells.

These products are available world-wide with the exception of China.

Below are the links to the two products we recommend (E-NOX Clean and UNO SF, by Bio-Circle).

Please follow the manufacturer’s recommendations regarding use.

Step #1 for your Stainless Steel Shell or Pod. Use E-NOX Clean - Cleaner/Brightener Gel. Here is the link: http://www.biocircle.com/en_US/products/environmental-solutions/industrial-cleaning-degreasing/e-nox-clean

Step #2 for your Stainless Steel Shell or Pod. Use UNO SF (as a neutralizer) – High Strength Degreaser. Here is the link: http://www.biocircle.com/en_US/products/environmental-solutions/industrial-cleaning-degreasing/uno-s-f

NOTE / Tips: Step #2 must be included. Always neutralize after cleaning. Leaving the cleaning cloth with E-NOX on a discolored spot for ten to twenty minutes may improve results.

To purchase, please contact BIO-CIRCLE. Kirby Morgan does not sell these products.