Home > Support > Bulletins > 2015 > Bulletin #06 of 2015

Bulletin #06 of 2015

Interior Title: 
Bulletin #6 of 2015
Title Type: 
Maintenance & Repair Bulletin
Bulletin Date: 
Bulletin #6 of 2015. May 4, 2015
Bulletin Type: 
Maintenance & Repair Bulletin
Bulletin Subject: 
This bulletin is to serve as a reminder of an important difference in installation procedure between the port retainer screws for the fiberglass helmets verses those of the stainless steel helmets.
Body: 
Bulletin #6 of 2015

When reinstalling the port retainer screws on fiberglass helmets, DO NOT use Loctite® threadlocker.

When reinstalling the port retainer screws on stainless steel helmets, Loctite® 248 Medium Strength, non-drip thread locker is used.

The above and more detailed information on procedure, torques and thread locker requirements will also be found in the Operations & Maintenance Manuals.

Please contact your local KMDSI dealer or e-mail KMDSI at [email protected] for more information.