Home > Support > Bulletins > 2016 > Bulletin #08 of 2016

Bulletin #08 of 2016

Interior Title: 
Bulletin #8 of 2016
Title Type: 
Change to Product
Bulletin Date: 
Bulletin #8 of 2016. September 2, 2016
Bulletin Type: 
Change to Product Bulletin
Bulletin Subject: 
P/N 525-211 Sealed Pull Pin Overhaul Kit Now for Two Pins
Products Affected: 
P/N 525-211 Sealed Pull Pin Overhaul Kit
Body: 

The P/N 525-211 Sealed Pull Pin Overhaul Kit now contains enough materials to overhaul two P/N 505-110 Sealed Pull Pin Assemblies.

Previously, the P/N 525-211 Sealed Pull Pin Overhaul Kit was designed for the overhaul of one sealed pull pin only.

Contents of the updated Sealed Pull Pin Overhaul Kit as follows:

Part #

Description

Qty.

510-008

O-rings, black

2

510-112

O-rings, red silicone

6

520-270

Syringes

2

530-110

Locknuts

2

Silicone Oil: Enough to fill more than two sealed pull pins.

NOTES:
KMDSI strongly recommends that the tender, stand-by diver, or at least a second person ALWAYS pre-dive check the sealed pull pins to ensure that both sealed pull pins are fully latched, in the closed and locked position prior to each and every dive.

KMDSI recommends overhaul of the P/N 505-110 Sealed Pull Pin Assemblies on an annual basis. (If military, or a special agency using the helmets much less frequently than commercial divers, recommendation is overhaul once every two years within a program vigilant inspection).

Please contact your local KMDSI dealer or e-mail sales@kirbymorgan.com for more information.