Home > Support > Manuals & Exploded Views

Manuals & Exploded Views

Manuals & Exploded Views

1

Please choose a Kirby Morgan product from the selected list below e.g. KM37. Then choose your resolution preference.

2

Select "All" on the top checkbox to download all, or select specific manuals.

3

Click "Download Manual" button. The download process will be prompted with a file name confirmation; if you are happy with the file name click "Next" to complete your download. The downloaded link will now be available on the top of the page.

Leave blank for all. Otherwise, the first selected term will be the default instead of "Any".
Leave blank for all. Otherwise, the first selected term will be the default instead of "Any".
Operations
Selected 73 rows in this page.  
File Page Updated Size
General Info, Description & Operational Specs, Inspection and Maintenance, General Preventative Maintenance INTRO 09/15/17 9.98 MB
Quad Valve and Tri-Valve® Exhaust QUAD 09/06/16 2.82 MB
BandMask Tri-Valve Exhaust BTRI 09/06/16 2.23 MB
SL 27® Water Dump 27WTR 05/24/16 1.08 MB
One Way Valve OWV 06/19/17 507.51 KB
Oral Nasal Mask (350/450/455) ON 05/24/16 640.99 KB
Overpressure Relief Valve OPRV 05/24/16 303.62 KB
Stainless Steel Helmets with SuperFlow® 350 or 455 Balanced Regulator Pod POD 02/08/17 4.26 MB
Stainless Steel Helmets with REX Pod REXPOD 08/02/16 3.69 MB
Bent Tube BNT 06/27/17 2.93 MB
SuperFlow® Regulator SF 05/24/16 5.41 MB
SuperFlow® 350 Regulator SF350 05/24/16 6.75 MB
SuperFlow® 450 Regulator SF450 05/24/16 7.64 MB
455 Balanced Regulator 455BAL 12/09/16 13.9 MB
REX Regulator REX 05/24/16 6.47 MB
Face Port, Port Retainer and Nose Block FCPRT 06/02/16 2.38 MB
BandMask Standard Hood, Face Seal, Band Keepers and Head Harness HBNK 09/08/17 11.41 MB
Handle on Fiberglass Helmets HNDL 05/24/16 662.12 KB
Handle on Stainless Steel Helmets SSHNDL 05/24/16 1.27 MB
Neck Dam, Locking Collar, Front Stand Offs and Chin Cushion NKDM 03/03/17 4.34 MB
Chin Strap, Sealed Pull Pins and Swing Catch for Fiberglass Helmets BTM 11/08/17 4.5 MB
Snap Tabs, Chin Strap, Swing Catch, Sealed Pull Pins Stainless Steel SSBTM 11/08/17 6.47 MB
SuperLite® 17B Neck Clamp Area 17BNK 05/24/16 3.78 MB
Head Cushion HDCSH 04/14/17 2.41 MB
17B Head Cushion 17BHC 05/24/16 820.34 KB
Brass/Chromed Brass Side Block SB 09/15/17 3.02 MB
Stainless Steel Side Block SSB 05/24/16 6.67 MB
Communications, Modular COM 08/25/17 4.35 MB
Communications on SuperLite® 17B and 17C Helmets, KMB 18 and 28 BandMasks® 17COM 05/24/16 2.66 MB
Accessories ACC 05/24/16 2.52 MB
Hot Water Shroud HWS 05/24/16 1.43 MB
Weights WGHTS 05/24/16 841.68 KB
17B Handle and Weights 17BHDL 05/24/16 1.11 MB
17C Handle and Side Weight 17C 05/24/16 1.86 MB
Torque Specs & Supply Pressure Requirements APNDX 11/03/17 1.05 MB
SL 17B Blowaparts (high-res) 11/01/17 3.05 MB
SL 17C Blowaparts (high-res) 04/14/17 1.42 MB
SL 27 Blowaparts (high-res) 06/20/17 1.4 MB
KM 37 Blowaparts (high-res) 04/14/17 2.79 MB
KM 37SS Blowaparts (high-res) 05/10/17 1.55 MB
KM 47 Blowaparts (high-res) 04/14/17 1.36 MB
KM 57 BlowAparts (high res) 04/14/17 2.85 MB
KM 77 Blowaparts (high-res) 05/10/17 1.48 MB
KM 97 Blowaparts (high-res) 05/10/17 1.56 MB
KMB 18 Blowapart (high-res) 06/20/17 1.15 MB
M-48 Mod-1 (high-res) 04/04/16 1.28 MB
M-48 SuperMask (high-res) 04/13/17 1.31 MB
805-015 SCUBA Pod (high-res) 07/06/16 901.67 KB
805-026 SCUBA Pod w/Balanced Purge Tube (high-res) 07/06/16 865.88 KB
EXO Standard and Original BlowApart 10/12/17 1.26 MB
KMACS 5 BlowApart (high-res) 03/13/17 7.5 MB
Communication Assemblies (high-res) 08/10/17 784.17 KB
Neck Ring Assemblies (high-res) 08/22/17 683.17 KB
Side Block (high-res) 08/04/17 743.87 KB
SL 17C and 27 Neck Ring Assemblies (high-res) 11/23/16 739.22 KB
Stainless Steel Locking Collar (high-res) 11/23/16 609.76 KB
Stainless Steel Side Block (high-res) 11/23/16 1.34 MB
505-008 SL 17A/B Neck Clamp/Yoke Assembly (high-res) 06/20/17 713.01 KB
SuperFlow Regulator (high-res) 06/20/17 1.91 MB
KMB 28 Blowapart (high-res) 06/20/17 1.1 MB
Rebreather Pod BlowApart (high res) 07/20/17 906.51 KB
Switchover Regulator BlowApart (high res) 08/22/17 683.47 KB
Manifold Block (high-res) 04/04/16 854.62 KB
SuperFlow® 350 BlowAparts (high res) 11/03/17 1.26 MB
SuperFlow® 450 Regulator BlowApart (high res) 01/23/17 992.84 KB
REX Regulator BlowApart - High Resolution 11/23/16 1.5 MB
455 Balanced Regulator Blowapart (high res) 11/28/17 1.88 MB
First Stage Regulator BlowApart (high res) 04/04/16 748.89 KB
Balanced SCUBA BlowApart (high res) 11/28/17 870.05 KB
Metal SuperFlow Scuba BlowApart (high res) 04/04/16 2.01 MB
Plastic SuperFlow Scuba BlowApart (high res) 09/20/17 1.4 MB
SuperFlow Scuba Non-Adjustable BlowApart Octopus (high res) 09/20/17 2.1 MB
Copyright 03/03/17 34.49 KB
User Guides Size Updated
M-48 Mod-1 User Guide (low-res) 2.57 MB 11/08/17
M-48 Mod-1 User Guide (high-res) 7.17 MB 11/08/17
Diver's Manifold Block (high-res) 2.22 MB 06/19/17
Diver's Manifold Block (low-res) 1.02 MB 06/19/17
Switchover Regulator (low-res) 965.71 KB 06/10/16
Switchover Regulator (high-res) 1.09 MB 06/10/16
Rebreather POD (low-res) 1.39 MB 06/10/16
Rebreather POD (high-res) 2.82 MB 06/10/16
Exploded Views & BlowAparts Size Updated
Balanced SCUBA BlowApart (high res) 870.05 KB 11/28/17
Balanced Scuba BlowApart (low-res) 765.34 KB 11/28/17
Switchover Regulator BlowApart (high res) 683.47 KB 08/22/17
Switchover Regulator BlowApart (low res) 695.59 KB 08/22/17
Rebreather Pod BlowApart (low res) 712.1 KB 07/20/17
Rebreather Pod BlowApart (high res) 906.51 KB 07/20/17
805-026 SCUBA Pod w/Balanced Purge Tube (high-res) 865.88 KB 07/06/16
805-026 SCUBA Pod w/Balanced Purge Tube (low-res) 723.34 KB 07/06/16
805-015 SCUBA Pod (low-res) 729.34 KB 07/06/16
805-015 SCUBA Pod (high-res) 901.67 KB 07/06/16
Manifold Block (low-res) 740.19 KB 04/04/16
Manifold Block (high-res) 854.62 KB 04/04/16
M-48 Mod-1 (low-res) 797.44 KB 04/04/16
M-48 Mod-1 (high-res) 1.28 MB 04/04/16
Leave blank for all. Otherwise, the first selected term will be the default instead of "Any".
Please Choose a Resolution.
Please Choose a Resolution.
Please Choose a Resolution.
Please Choose a Resolution.
Please Choose a Resolution.
SL 17A [Discontinued]
Manuals Updated
Introduction - Contents & Definition of Signal Words Used in this Manual 11/29/17
Chapter 1.0 - General Information KMDSI Products 11/29/17
Chapter 2.0 - Description & Operational Specifications - SuperLite®-17B 11/29/17
Chapter 3.0 - Operating Instructions 11/29/17
Chapter 4.0 - Troubleshooting 11/29/17
Chapter 5.0 - Inspection and Maintenance 11/29/17
Chapter 6.0 - General Preventative Maintenance 11/29/17
Chapter 7.0 - Breathing System Maintenance and Repairs 11/29/17
Chapter 8.0 - Corrective Maintenance 11/29/17
Chapter 9.0 - Accessories for the SuperLite®-17B 11/29/17
Appendix- Torque Specifications, Maintenance and Inspection Procedures and Supply Pressure Requirements & Tables 11/29/17
Complete Manual 11/29/17
17A/B BlowApart 11/29/17
SL 17K [Discontinued]
Manuals Updated
Introduction - Contents & Definition of Signal Words Used in this Manual 10/12/17
Chapter 1.0 - General Information KMDSI Products 10/12/17
Chapter 2.0 - Description & Operational Specifications - SL-17K 10/12/17
Chapter 3.0 - Operating Instructions 10/12/17
Chapter 4.0 - Troubleshooting 10/12/17
Chapter 5.0 - Inspection and Maintenance 10/12/17
Chapter 6.0 - General Preventative Maintenance 10/12/17
Chapter 7.0 - Breathing System Maintenance and Repairs 10/12/17
Chapter 8.0 - Corrective Maintenance 10/12/17
Chapter 9.0 - Accessories 10/12/17
Appendix- Torque Specifications, Maintenance and Inspection Procedures and Supply Pressure Requirements & Tables 10/12/17
Complete Manual 10/12/17
17K BlowApart 10/12/17
EXO-BR [Discontinued]
Manuals Updated
Introduction - Contents & Definition of Signal Words Used in this Manual 10/12/17
Chapter 1.0 - General Information KMDSI Products 10/12/17
Chapter 2.0 - Operating Instructions 10/12/17
Chapter 3.0 - Diving With The EXO® Full Face Mask 10/12/17
Chapter 4.0 - Post Dive Procedures And General Maintenance 10/12/17
Chapter 5.0 - EXO® Regulator Maintenance 10/12/17
Chapter 6.0 - Frame And Lens Repairs 10/12/17
Chapter 7.0 - Communications 10/12/17
Appendix- Breathing Gas Requirements EXO® Balance Regulator Full-Face Mask 10/12/17
Appendix II- EXO® Full-Face Mask Transport And Storage 10/12/17
Table of Equivalents 10/12/17
Complete Manual 10/12/17
EXO-BR BlowApart 10/12/17
EXO Standard and Original BlowApart [Discontinued]
Updated
EXO Standard and Original BlowApart 10/12/17
100-400 Two-Diver Air Intercom (P/N 415-107) User Guide [Discontinued]
Manuals Updated
100-400 Two-Diver Air Intercom (P/N 415-107) User Guide 10/12/17
100-401 User Guide - Low Resolution
Thursday, June 9, 2016
  1. No Changelogs Available for User Guide.
100-133 User Guide - Low Resolution
Thursday, October 15, 2015
  1. Updated CE information.
,
Monday, October 17, 2016
  1. Updated CE information.
,
Tuesday, August 15, 2017
  1. Updated CE Verbiage.
100-120 User Guide - Low Resolution
Monday, April 25, 2016
  1. Removed CE certification.
,
Thursday, October 20, 2016
  1. Added clarification about CE status.
,
Tuesday, August 15, 2017
  1. Updated CE Verbiage.
,
Friday, December 8, 2017
  1. Updated the plastic adjustable second stage scuba regulator P/N 305-166 and plastic non-adjustable second stage scuba regulator (octopus) Part # 305-171 BlowApart.
100-141 User Guide - Low Resolution
Thursday, October 15, 2015
  1. Updated CE information.
,
Tuesday, January 3, 2017
  1. Added note that the flow sleeve is not a removable part.
,
Monday, August 7, 2017
  1. Removed section "Using the balanced second stage regulator with the Kirby Morgan M-48 SuperMask and M-48 Mod-1" and replaced with "Balance Purge Tube and Regulator Installation" section.
,
Tuesday, August 15, 2017
  1. Updated CE verbiage
455 Balanced Regulator BlowApart - [Low Resolution]
Tuesday, September 20, 2016
  1. Switched the 510-796 exhaust valve back to the 510-776.
Wednesday, December 28, 2016
  1. Removed "for the KM 97 Helmet" from the main description.
Tuesday, November 28, 2017
  1. Updated the material on the balance spacer.
Balanced SCUBA BlowApart 200-120 - [Low Resolution]
Tuesday, January 3, 2017
  1. Added note that the flow sleeve is not a removable part.
Tuesday, November 28, 2017
  1. Updated the material color of the balance spacer and P/N 250-065 washer.
M-48 SuperMask - Low Resolution
Thursday, October 15, 2015
  1. Updated with CE information.
,
Friday, June 24, 2016
  1. Updated content throughout user guide.
,
Thursday, September 8, 2016
  1. Updated the checklists.
,
Friday, October 14, 2016
  1. Updated with CE information.
,
Monday, October 17, 2016
  1. Updated with CE information.
,
Friday, February 10, 2017
  1. Removed reference to serial number location.
,
Wednesday, November 8, 2017
  1. Updated the P/N 805-015 Scuba Pod BlowApart.
M-48 Mod-1 User Guide - Low Resolution
Thursday, December 17, 2015
  1. Updated throughout, including the updated mask skirt.
,
Thursday, May 5, 2016
  1. Updated content throughout user guide.
,
Friday, May 13, 2016
  1. Removed and updated content
,
Thursday, September 8, 2016
  1. Updated the checklists.
,
Friday, October 14, 2016
  1. Updated with CE information.
,
Monday, October 17, 2016
  1. Updated with CE information.
,
Wednesday, November 8, 2017
  1. Updated the P/N 805-015 Scuba Pod BlowApart.
Snap Tabs, Chin Strap, Swing Catch, Sealed Pull Pins Stainless Steel - [Low Resolution]
Monday, April 27, 2015
  1. Updated with auxiliary port and front stand offs.
Wednesday, November 8, 2017
  1. Added the pull pin overhaul and pull pin sleeve sections.
Chin Strap, Sealed Pull Pins and Swing Catch for Fiberglass Helmets - [Low Resolution]
Tuesday, September 22, 2015
  1. Updated the verbiage throughout, including to service sealed pull pins annually.
Wednesday, November 8, 2017
  1. Added the pull pin overhaul and pull pin sleeve sections.
Appendix - [Low Resolution]
Thursday, December 10, 2015
  1. Updated torque specs throughout and changed type of Loctite® required on several parts.
Thursday, May 19, 2016
  1. Updated torque specs throughout and changed type of Loctite® needed.
Wednesday, July 20, 2016
  1. Updated the KM 57 location numbers and the 455 balanced regulator's P/N 530-099 Cover Retainer Screw torque.
Thursday, December 29, 2016
  1. Updated to accommodate the modularized BlowAparts.
Monday, April 24, 2017
  1. Updated the KM 47 locations due to its new modularity.
Tuesday, June 20, 2017
  1. Updated to accommodate the newly modular KMB 18, 28, SL 17B and 27 BlowAparts.
Monday, August 14, 2017
  1. Added note 3, allowable deviation: ± 8%.
Wednesday, August 23, 2017
  1. Updated communications BlowApart location numbers.
Tuesday, October 3, 2017
  1. Added P/N 550-560 Adjustment Lock Nut, REX to REX torque specs.
Friday, November 3, 2017
  1. Updated torque specs for the port retainer adapter and screw.
SuperFlow® 350 BlowAparts - [Low Resolution]
Friday, November 3, 2017
  1. Updated material coloring.
SL 17B BlowAparts - [Low Resolution]
Friday, May 13, 2016
  1. Updated earphones, microphone and communications set.
Friday, April 14, 2017
  1. Added the note (order P/N 525-745) to the 510-837 head cushion foam spacer assembly and added note that the nose block device includes the nose block pad.
Tuesday, June 20, 2017
  1. Created modular BlowApart.
Wednesday, November 1, 2017
  1. Corrected the head cushion, head cushion bag and helmet shell part numbers
Plastic Second Stage SCUBA Regulator Blowapart - [Low Resolution]
Wednesday, September 20, 2017
  1. Switched the spring to the opposite side of the inlet valve. Updated the part number for the O-ring that's installed on the scuba inlet nipple.
SuperFlow Scuba Non-Adjustable BlowApart Octopus - [Low Resolution]
Wednesday, September 20, 2017
  1. Switched the spring to the opposite side of the inlet valve. Updated the part number for the O-ring that's installed on the scuba inlet nipple.
Introduction - [Low Resolution]
Thursday, May 21, 2015
  1. Updated with current configurations of the MOD-1 and SuperMask and updated photos throughout module.
Tuesday, August 18, 2015
  1. Updated with current configurations of the MOD-1 and SuperMask and updated photos throughout module.
Friday, October 14, 2016
  1. Updated CE information and EXO product photo.
Monday, October 24, 2016
  1. Updated CE information.
Tuesday, January 31, 2017
  1. Added front cover page.
Tuesday, April 18, 2017
  1. Added serial number and CE diagrams for the SuperFlow, SuperFlow 350 and 455 regulators. Updated the packaging procedures for Band Masks.
Friday, September 15, 2017
  1. Added free flow section.
Brass/Chromed Brass Side Block - [Low Resolution]
Monday, May 4, 2015
  1. Updated with front stand offs.
Friday, September 15, 2017
  1. Added free flow section.
BandMask Standard Hood, Face Seal, Band Keepers and Head Harness - [Low Resolution]
Friday, September 8, 2017
  1. Added the Band Mask hood and molded face seal replacement and replacing a molded face seal sections. Added the updated hood and molded face seal sizing guide.
Communications, Modular - [Low Resolution]
Monday, May 4, 2015
  1. Updated with auxiliary port and front stand offs.
Switchover Regulator BlowApart - [Low Resolution]
Tuesday, August 22, 2017
  1. No Changelog Available for BlowAparts.
Neck Ring Assemblies - [Low Resolution]
Wednesday, November 23, 2016
  1. No Changelog Available for BlowAparts.
Communication Assemblies - [Low Resolution]
Thursday, August 10, 2017
  1. Added the microphone assembly into the BlowApart.
Side Block - [Low Resolution]
Wednesday, November 23, 2016
  1. No Changelog Available for BlowAparts.
Rebreather Pod BlowApart 805-080 - [Low Resolution]
Thursday, July 20, 2017
  1. No Changelog Available for BlowAparts.
Bent Tube - [Low Resolution]
Friday, September 12, 2014
  1. Added bent tube procedures for the REX regulator.
Monday, March 2, 2015
  1. Updated with front stand offs.
Tuesday, June 27, 2017
  1. Divided the module into three main sections based on regulator and updated the procedures.
505-008 SL 17A/B Neck Clamp/Yoke Assembly - [Low Resolution]
Tuesday, June 20, 2017
  1. No Changelog Available for BlowAparts.
KMB 28 BlowApart - [Low Resolution]
Tuesday, June 20, 2017
  1. Created modular BlowApart and separated the KMB 18 and 28 into separate BlowAparts.
KMB 18 BlowApart - [Low Resolution]
Wednesday, April 6, 2016
  1. Updated the KMB hood assembly, earphones, microphone and communications set part numbers and added in the face seal.
Tuesday, June 20, 2017
  1. Created modular BlowApart and separated the KMB 18 and 28 into separate BlowAparts.
SL 27 Blowaparts - [Low Resolution]
Friday, July 8, 2016
  1. Relocated a few location bubbles and fasteners parts associated with the earphone retainer and eliminated the 530-547 washer from the neck pad, as it's included with the neck pad.
Tuesday, November 8, 2016
  1. Added the front stand offs and accompanying screw as separate part numbers, rather than the 525-116 kit.
Friday, April 14, 2017
  1. Added the note (order P/N 525-745) to the 510-837 head cushion foam spacer assembly and separated the nose block pad from the nose block device.
Tuesday, June 20, 2017
  1. Created modular BlowApart.
SuperFlow Regulator - [Low Resolution]
Tuesday, June 20, 2017
  1. No Changelog Available for BlowAparts.
100-134 User Guide - Low Resolution
Tuesday, February 21, 2017
  1. Added extra pages, including a second maintenance record page, for printing pagination purposes.
,
Monday, June 19, 2017
  1. Corrected the orientation of the adapter in the BlowApart image.
One Way Valve - [Low Resolution]
Wednesday, March 15, 2017
  1. Updated the diagram of the one way valve exploded view.
Monday, June 19, 2017
  1. Corrected the orientation of the adapter in the BlowApart image.
100-131 User Guide - Low Resolution
Thursday, January 26, 2017
  1. Updated content throughout.
,
Friday, May 19, 2017
  1. Fixed pagination issue.
KM 97 Blowaparts [Low Resolution]
Monday, May 23, 2016
  1. Added the additional port on the stainless steel side block.
Friday, August 5, 2016
  1. Added the front stand off, associated screw part number and the complete kit part numbers.
Tuesday, September 20, 2016
  1. Switched the 510-796 exhaust valve back to the 510-776.
Wednesday, November 23, 2016
  1. Created modular BlowAparts.
Friday, April 14, 2017
  1. Added the note (order P/N 525-745) to the 510-837 head cushion foam spacer assembly and added note that the nose block device includes the nose block pad.
Wednesday, May 10, 2017
  1. Updated description on the 550-574 from, "spacer" to "sleeve" and updated the appearance of some components.
KM 77 Blowaparts - [Low Resolution]
Monday, May 23, 2016
  1. Added the additional port on the stainless steel side block.
Friday, August 5, 2016
  1. Added the front stand off, associated screw part number and the complete kit part numbers.
Wednesday, November 23, 2016
  1. Created modular BlowAparts.
Friday, April 14, 2017
  1. Added the note (order P/N 525-745) to the 510-837 head cushion foam spacer assembly and added note that the nose block device includes the nose block pad.
Wednesday, May 10, 2017
  1. Updated the appearance of components to maintained consistency with the other stainless steel helmets.
KM 37SS Blowaparts - [Low Resolution]
Monday, May 23, 2016
  1. Added the additional port on the stainless steel side block.
Friday, August 5, 2016
  1. Added the front stand off, associated screw part number and the complete kit part numbers.
Wednesday, November 23, 2016
  1. Created modular BlowAparts.
Friday, April 14, 2017
  1. Added the note (order P/N 525-745) to the 510-837 head cushion foam spacer assembly and added note that the nose block device includes the nose block pad.
Wednesday, May 10, 2017
  1. Updated description on the 550-574 from, "spacer" to "sleeve" and updated the appearance of some components.
KM 47 Blowaparts - [Low Resolution]
Tuesday, November 8, 2016
  1. Added the front stand offs and accompanying screw as separate part numbers, rather than the 525-116 kit.
Friday, April 14, 2017
  1. Added the note (order P/N 525-745) to the 510-837 head cushion foam spacer assembly, added note that the nose block device includes the nose block pad and created modular BlowAparts.
KM 37 BlowAparts - [Low Resolution]
Tuesday, November 8, 2016
  1. Added the front stand offs and accompanying screw as separate part numbers, rather than the 525-116 kit.
Wednesday, November 23, 2016
  1. Created modular BlowAparts.
Friday, April 14, 2017
  1. Added the note (order P/N 525-745) to the 510-837 head cushion foam spacer assembly and added note that the nose block device includes the nose block pad.
SL 17C Blowaparts - [Low Resolution]
Friday, May 13, 2016
  1. Updated earphones, microphone and communications set.
Tuesday, November 8, 2016
  1. Added the front stand offs and accompanying screw as separate part numbers, rather than the 525-116 kit.
Wednesday, November 23, 2016
  1. Created modular BlowAparts.
Friday, April 14, 2017
  1. Added the note (order P/N 525-745) to the 510-837 head cushion foam spacer assembly and added note that the nose block device includes the nose block pad.
KM 57 BlowAparts - [Low Resolution]
Friday, March 3, 2017
  1. Created modular BlowAparts.
Friday, April 14, 2017
  1. Added the note (order P/N 525-745) to the 510-837 head cushion foam spacer assembly and added note that the nose block device includes the nose block pad.
Head Cushion - [Low Resolution]
Friday, May 8, 2015
  1. Updated with auxiliary port and front stand offs.
Friday, April 14, 2017
  1. Updated entire module throughout, including new procedures for head cushion stuffing along with new images to accompany.
M-48 SuperMask - Low Resolution
Thursday, April 13, 2017
  1. Removed 805-030 Harness, non-stretch (obsolete) and "*Indicates parts for general sale."
KMACS-5 BlowApart - Low Resolution
Tuesday, June 16, 2015
  1. Added italicized notes on communicator panel page.
Wednesday, May 4, 2016
  1. Updated the communicator.
Thursday, May 12, 2016
  1. Corrected communications wire direction.
Monday, March 13, 2017
  1. Current location #s 61 and 62 (445-115 Door and 420-160 Slide Latch) were switched.
Copyright - [Low Resolution]
Friday, March 3, 2017
  1. Replaced raw text file with a PDF file.
Neck Dam, Locking Collar, Front Stand Offs and Chin Cushion - [Low Resolution]
Friday, August 12, 2016
  1. Added the front stand offs.
Stainless Steel Helmets with SuperFlow® 350 or 455 Balanced Regulator Pod - [Low Resolution]
Monday, March 2, 2015
  1. Updated with auxiliary port and front stand offs.
Monday, August 1, 2016
  1. Updated module throughout.
SuperFlow® 450 Regulator BlowApart - [Low Resolution]
Monday, January 23, 2017
  1. Updated internal components.
455 Balanced Regulator - [Low Resolution]
Tuesday, June 3, 2014
  1. Added explanation regarding the two LP plugs in the 455 regulator body.
  2. Various grammatical corrections.
Friday, December 9, 2016
  1. Updated wrench size from 1" to 15/16" in step six in 1.1.5 455 Balanced Regulator Bias Adjustment Field Service with Demand Regulator on Helmet.
REX Regulator - [Low Resolution]
  1. No changelog available for BlowAparts.
Stainless Steel Side Block - [Low Resolution]
Wednesday, November 23, 2016
  1. No Changelog Available for BlowAparts.
Stainless Steel Locking Collar - [Low Resolution]
Wednesday, November 23, 2016
  1. No Changelog Available for BlowAparts.
SL 17C and 27 Neck Ring Assemblies - [Low Resolution]
Wednesday, November 23, 2016
  1. No Changelog Available for BlowAparts.
Band Mask Tri-Valve Exhaust - [Low Resolution]
Tuesday, September 6, 2016
  1. Updated with correct parting line assembly instructions.
Quad Valve and Tri-Valve® Exhaust - [Low Resolution]
Monday, March 2, 2015
  1. Updated with front stand offs.
Tuesday, September 6, 2016
  1. Updated with correct parting line assembly instructions.
Stainless Steel Helmets with REX Pod - [Low Resolution]
Friday, February 27, 2015
  1. Updated with front stand offs and auxiliary port.
Tuesday, August 2, 2016
  1. Updated module throughout.
805-026 SCUBA Pod w/Balanced Purge Tube - Low Resolution
Wednesday, July 6, 2016
  1. Updated the description for the P/N 820-126 Hinge Mount, Pod Lock
805-015 SCUBA Pod - Low Resolution
Thursday, January 7, 2016
  1. Purchasable parts, added the P/N 520-039 Tie Wrap and added the 805-026 BlowApart.
Friday, January 29, 2016
  1. Added the Air Inlet Swivel P/N 305-017.
Wednesday, April 6, 2016
  1. Corrected location numbers.
Wednesday, July 6, 2016
  1. Updated the description for the P/N 820-126 Hinge Mount, Pod Lock
100-820 User Guide - Low Resolution
Friday, June 10, 2016
  1. No Changelogs Available for User Guide.
100-813 User Guide - Low Resolution
Friday, June 10, 2016
  1. No Changelogs Available for User Guide.
Face Port - [Low Resolution]
Friday, August 8, 2014
  1. Updated Loctite® use for stainless steel helmets only in section 1.1.4 Face Port and Port Retainer Replacement, step 5.
Friday, February 27, 2015
  1. Updated with front stand offs.
SL 27® Water Dump - [Low Resolution]
Monday, March 2, 2015
  1. Updated with front stand offs.
Overpressure Relief Valve - [Low Resolution]
Tuesday, January 19, 2016
  1. No changelog available for manuals.
Oral Nasal Mask (350/450/455) - [Low Resolution]
Tuesday, January 19, 2016
  1. No changelog available for manuals.
SuperFlow® Regulator - [Low Resolution]
Wednesday, March 18, 2015
  1. No changelog available for manuals.
SuperFlow® 350 Regulator - [Low Resolution]
Monday, March 2, 2015
  1. Updated with front stand offs.
SuperFlow® 450 Regulator - [Low Resolution]
Tuesday, January 19, 2016
  1. No changelog available for manuals.
REX Regulator - [Low Resolution]
Friday, February 27, 2015
  1. Updated with front stand offs and auxiliary port.
Handle on Fiberglass Helmets - [Low Resolution]
Friday, February 27, 2015
  1. Updated with front stand offs.
Handle on Stainless Steel Helmets - [Low Resolution]
Tuesday, March 3, 2015
  1. Updated with auxiliary port and front standoffs.
SuperLite® 17B Neck Clamp Area - [Low Resolution]
Tuesday, January 19, 2016
  1. No changelog available for manuals.
17B Head Cushion - [Low Resolution]
Tuesday, September 8, 2015
  1. No changelog available for manuals.
Stainless Steel Side Block - [Low Resolution]
Monday, May 4, 2015
  1. Updated with auxiliary port and front stand offs.
Communications on SuperLite® 17B and 17C Helmets, KMB 18 and 28 BandMasks® - [Low Resolution]
Tuesday, May 12, 2015
  1. Updated wiring diagram.
Accessories - [Low Resolution]
Tuesday, January 19, 2016
  1. No changelog available for manuals.
Hot water shroud - [Low Resolution]
Tuesday, January 19, 2016
  1. No changelog available for manuals.
Weights - [Low Resolution]
Tuesday, January 19, 2016
  1. No changelog available for manuals.
17B Handle and Weights - [Low Resolution]
Tuesday, January 19, 2016
  1. No changelog available for manuals.
17C Handle and Side Weight - [Low Resolution]
Thursday, May 14, 2015
  1. Updated with front stand offs.
Metal Second Stage SCUBA Regulator Blowapart - [Low Resolution]
  1. No changelog available for blowaparts at this time.
First Stage Regulator BlowApart 305-161 - [Low Resolution]
  1. No changelog available for BlowAparts.
Manifold Block - Low Resolution
Thursday, August 27, 2015
  1. Removed the overpressure relief valve from the manifold block.
EXO Standard and Original BlowApart - [Low Resolution]
  1. No changelog available for BlowAparts.
M-48 Mod-1 - Low Resolution
Thursday, December 17, 2015
  1. Updated throughout, including the updated mask skirt.