Home > Support > Manuals & Exploded Views

Manuals & Exploded Views

Manuals & Exploded Views

1

Please choose a Kirby Morgan product from the selected list below e.g. KM37. Then choose your resolution preference.

2

Select "All" on the top checkbox to download all, or select specific manuals.

3

Click "Download Manual" button. The download process will be prompted with a file name confirmation; if you are happy with the file name click "Next" to complete your download. The downloaded link will now be available on the top of the page.

Leave blank for all. Otherwise, the first selected term will be the default instead of "Any".
Leave blank for all. Otherwise, the first selected term will be the default instead of "Any".
Operations
File Page Updatedsort descending Size
M-48 Mod-1 (high-res) 04/04/16 1.28 MB
Manifold Block (high-res) 04/04/16 854.62 KB
Metal SuperFlow Scuba BlowApart (high res) 04/04/16 2.01 MB
805-026 SCUBA Pod w/Balanced Purge Tube (high-res) 07/06/16 865.88 KB
SL 17C and 27 Neck Ring Assemblies (high-res) 11/23/16 739.22 KB
Stainless Steel Locking Collar (high-res) 11/23/16 609.76 KB
Stainless Steel Side Block (high-res) 11/23/16 1.34 MB
REX Regulator BlowApart - High Resolution 11/23/16 1.5 MB
SuperFlow® 450 Regulator BlowApart (high res) 01/23/17 992.84 KB
Copyright 03/03/17 34.49 KB
M-48 SuperMask (high-res) 04/13/17 1.31 MB
KM 57 BlowAparts (high res) 04/14/17 2.85 MB
KM 37 Blowaparts (high-res) 04/14/17 2.79 MB
SL 17C Blowaparts (high-res) 04/14/17 1.42 MB
SuperFlow Regulator (high-res) 06/20/17 1.91 MB
KMB 18 Blowapart (high-res) 06/20/17 1.15 MB
KMB 28 Blowapart (high-res) 06/20/17 1.1 MB
505-008 SL 17A/B Neck Clamp/Yoke Assembly (high-res) 06/20/17 713.01 KB
Side Block (high-res) 08/04/17 743.87 KB
Communication Assemblies (high-res) 08/10/17 784.17 KB
Neck Ring Assemblies (high-res) 08/22/17 683.17 KB
SuperFlow Scuba Non-Adjustable BlowApart Octopus (high res) 09/20/17 2.1 MB
Plastic SuperFlow Scuba BlowApart (high res) 09/20/17 1.4 MB
EXO Standard and Original BlowApart 10/12/17 1.26 MB
Balanced SCUBA BlowApart (high res) 11/28/17 870.05 KB
455 Balanced Regulator Blowapart (high res) 11/28/17 1.88 MB
SL 17B Blowaparts (high-res) 12/28/17 3.05 MB
Rebreather Pod BlowApart (high res) 02/19/18 938.57 KB
Switchover Regulator BlowApart (high res) 02/19/18 1.02 MB
805-015 SCUBA Pod (high-res) 03/05/18 951.62 KB
KM 47 Blowaparts (high-res) 03/09/18 2.47 MB
KM 37SS Blowaparts (high-res) 05/07/18 2.39 MB
KM 77 Blowaparts (high-res) 05/07/18 2.25 MB
KM 97 Blowaparts (high-res) 05/07/18 2.4 MB
Communications on SuperLite® 17B and 17C Helmets, KMB 18 and 28 BandMasks® 17COM 05/07/18 2.75 MB
SuperLite® 17B Neck Clamp Area 17BNK 05/07/18 3.84 MB
17B Head Cushion 17BHC 05/07/18 834.82 KB
17B Handle and Weights 17BHDL 05/07/18 1.07 MB
17C Handle and Side Weight 17C 05/07/18 2.2 MB
Stainless Steel Helmets with SuperFlow® 350 or 455 Balanced Regulator Pod POD 05/07/18 4.3 MB
Accessories ACC 05/07/18 2.55 MB
BandMask Hood, Face Seal, Band Keepers and Head Harness HBNK 05/07/18 11.36 MB
BandMask Tri-Valve Exhaust BTRI 05/07/18 2.33 MB
Bent Tube BNT 05/07/18 2.93 MB
Chin Strap, Sealed Pull Pins and Swing Catch for Fiberglass Helmets BTM 05/07/18 4.5 MB
Communications, Modular COM 05/07/18 4.69 MB
General Information KMDSI Products INFO 05/07/18 3.13 MB
Face Port, Port Retainer and Nose Block FCPRT 05/07/18 2.46 MB
Handle on Fiberglass Helmets HNDL 05/07/18 649.45 KB
Head Cushion, Head Cushion Foam Spacer (HCFS) and Chin Cushion HDCSH 05/07/18 30.6 MB
Hot Water Shroud HWS 05/07/18 1.47 MB
Neck Ring Assembly, Locking Collar and Front Stand Offs NKDM 05/07/18 4.24 MB
Oral Nasal Mask (350/450/455) ON 05/07/18 640.19 KB
Overpressure Relief Valve OPRV 05/07/18 289.91 KB
REX Regulator and Oral Nasal REX 05/07/18 6.46 MB
Stainless Steel Helmets with REX Pod REXPOD 05/07/18 3.69 MB
Brass/Chromed Brass Side Block SB 05/07/18 3.01 MB
SL 27® Water Dump 27WTR 05/07/18 1.09 MB
Snap Tabs, Chin Strap, Swing Catch, Sealed Pull Pins Stainless Steel SSBTM 05/07/18 6.48 MB
Handle on Stainless Steel Helmets SSHNDL 05/07/18 1.29 MB
Stainless Steel Side Block SSB 05/07/18 6.87 MB
SuperFlow® 350 Regulator SF350 05/07/18 6.78 MB
SuperFlow® 450 Regulator SF450 05/07/18 7.62 MB
455 Balanced Regulator 455BAL 05/07/18 14.05 MB
SuperFlow® Regulator SF 05/07/18 5.39 MB
Weights WGHTS 05/07/18 856.67 KB
Description and Operational Specifications DOS 05/07/18 7.08 MB
General Preventative Maintenance GENPRE 05/07/18 776.22 KB
Inspection and Maintenance IM 05/07/18 104.83 KB
Quad Valve and Tri-Valve® Exhaust QUAD 05/07/18 2.78 MB
SuperFlow® 350 BlowApart (high res) 05/22/18 1.25 MB
Torque Specs & Supply Pressure Requirements APNDX 05/22/18 1.06 MB
SL 27 Blowaparts (high-res) 06/07/18 2.64 MB
First Stage Regulator BlowApart (high res) 06/21/18 746.76 KB
KMACS 5 BlowApart (high-res) 06/25/18 10.14 MB
One Way Valve OWV 07/16/18 999.14 KB
User Guides Size Updated
Diver's Manifold Block (low-res) 1.02 MB 06/19/17
Diver's Manifold Block (high-res) 2.22 MB 06/19/17
Rebreather POD (high-res) 2.88 MB 03/13/18
Switchover Regulator (low-res) 928.13 KB 03/13/18
Switchover Regulator (high-res) 1.06 MB 03/13/18
Rebreather POD (low-res) 1.32 MB 03/13/18
M-48 Mod-1 User Guide (low-res) 2.57 MB 05/15/18
M-48 Mod-1 User Guide (high-res) 7.17 MB 05/15/18
Leave blank for all. Otherwise, the first selected term will be the default instead of "Any".
455 Balanced Regulator
Manual High Resolution
AttachmentSize
455 Balanced Regulator14.05 MB
Blowaparts High Resolution:
SuperFlow® Regulator
Manual High Resolution
AttachmentSize
SuperFlow® Regulator5.39 MB
REX Regulator
Manual High Resolution
AttachmentSize
REX Regulator and Oral Nasal6.46 MB
SuperFlow® 450 Regulator
Manual High Resolution
AttachmentSize
SuperFlow® 450 Regulator7.62 MB
Blowaparts High Resolution:
SuperFlow® 350 Regulator
Blowaparts High Resolution:
AttachmentSize
SuperFlow® 350 BlowApart (high res)1.25 MB
Manual High Resolution
AttachmentSize
SuperFlow® 350 Regulator6.78 MB
EXO-BR [Discontinued]
Manuals Updated
Introduction - Contents & Definition of Signal Words Used in this Manual 10/12/17
Chapter 1.0 - General Information KMDSI Products 10/12/17
Chapter 2.0 - Operating Instructions 10/12/17
Chapter 3.0 - Diving With The EXO® Full Face Mask 10/12/17
Chapter 4.0 - Post Dive Procedures And General Maintenance 10/12/17
Chapter 5.0 - EXO® Regulator Maintenance 10/12/17
Chapter 6.0 - Frame And Lens Repairs 10/12/17
Chapter 7.0 - Communications 10/12/17
Appendix- Breathing Gas Requirements EXO® Balance Regulator Full-Face Mask 10/12/17
Appendix II- EXO® Full-Face Mask Transport And Storage 10/12/17
Table of Equivalents 10/12/17
Complete Manual 10/12/17
EXO-BR BlowApart 10/12/17
SL 17K [Discontinued]
Manuals Updated
Introduction - Contents & Definition of Signal Words Used in this Manual 10/12/17
Chapter 1.0 - General Information KMDSI Products 10/12/17
Chapter 2.0 - Description & Operational Specifications - SL-17K 10/12/17
Chapter 3.0 - Operating Instructions 10/12/17
Chapter 4.0 - Troubleshooting 10/12/17
Chapter 5.0 - Inspection and Maintenance 10/12/17
Chapter 6.0 - General Preventative Maintenance 10/12/17
Chapter 7.0 - Breathing System Maintenance and Repairs 10/12/17
Chapter 8.0 - Corrective Maintenance 10/12/17
Chapter 9.0 - Accessories 10/12/17
Appendix- Torque Specifications, Maintenance and Inspection Procedures and Supply Pressure Requirements & Tables 10/12/17
Complete Manual 10/12/17
17K BlowApart 10/12/17
100-400 Two-Diver Air Intercom (P/N 415-107) User Guide [Discontinued]
Manuals Updated
100-400 Two-Diver Air Intercom (P/N 415-107) User Guide 10/12/17
EXO Standard and Original BlowApart [Discontinued]
Updated
EXO Standard and Original BlowApart 10/12/17
SL 17A [Discontinued]
Manuals Updated
Introduction - Contents & Definition of Signal Words Used in this Manual 11/29/17
Chapter 1.0 - General Information KMDSI Products 11/29/17
Chapter 2.0 - Description & Operational Specifications - SuperLite®-17B 11/29/17
Chapter 3.0 - Operating Instructions 11/29/17
Chapter 4.0 - Troubleshooting 11/29/17
Chapter 5.0 - Inspection and Maintenance 11/29/17
Chapter 6.0 - General Preventative Maintenance 11/29/17
Chapter 7.0 - Breathing System Maintenance and Repairs 11/29/17
Chapter 8.0 - Corrective Maintenance 11/29/17
Chapter 9.0 - Accessories for the SuperLite®-17B 11/29/17
Appendix- Torque Specifications, Maintenance and Inspection Procedures and Supply Pressure Requirements & Tables 11/29/17
Complete Manual 11/29/17
17A/B BlowApart 11/29/17
One Way Valve - [Low Resolution]
Wednesday, March 15, 2017
  1. Updated the diagram of the one way valve exploded view.
Monday, June 19, 2017
  1. Corrected the orientation of the adapter in the BlowApart image.
Thursday, May 3, 2018
  1. Updated layout.
Monday, June 11, 2018
  1. Added one way valve check sections.
100-141 User Guide - Low Resolution
Thursday, October 15, 2015
  1. Updated CE information.
,
Tuesday, January 3, 2017
  1. Added note that the flow sleeve is not a removable part.
,
Monday, August 7, 2017
  1. Removed section "Using the balanced second stage regulator with the Kirby Morgan M-48 SuperMask and M-48 Mod-1" and replaced with "Balance Purge Tube and Regulator Installation" section.
,
Tuesday, August 15, 2017
  1. Updated CE verbiage
KMACS-5 BlowApart - Low Resolution
Tuesday, June 16, 2015
  1. Added italicized notes on communicator panel page.
Wednesday, May 4, 2016
  1. Updated the communicator.
Thursday, May 12, 2016
  1. Corrected communications wire direction.
Monday, March 13, 2017
  1. Current location #s 61 and 62 (445-115 Door and 420-160 Slide Latch) were switched.
Tuesday, February 13, 2018
  1. Added Must order P/N 425-110 (qty. 2 valves) to P/N 455-157.
Thursday, May 10, 2018
  1. Corrected the orientation of the 455-049 Check Valve, L.P.
100-133 User Guide - Low Resolution
Thursday, October 15, 2015
  1. Updated CE information.
,
Monday, October 17, 2016
  1. Updated CE information.
,
Tuesday, August 15, 2017
  1. Updated CE Verbiage.
,
Wednesday, June 20, 2018
  1. Corrected BlowApart location number 6 and 7, 310-115 and 510-011, part numbers were switched. Corrected material colors for 350-120, seat. Corrected appearance and color of the 310-023.
First Stage Regulator BlowApart 305-161 - [Low Resolution]
Thursday, June 14, 2018
  1. Location number 6 and 7, 310-115 and 510-011, part numbers were switched. Corrected material colors for 350-120, seat. Corrected appearance and color of the 310-023.
SL 27 Blowaparts - [Low Resolution]
Friday, July 8, 2016
  1. Relocated a few location bubbles and fasteners parts associated with the earphone retainer and eliminated the 530-547 washer from the neck pad, as it's included with the neck pad.
Tuesday, November 8, 2016
  1. Added the front stand offs and accompanying screw as separate part numbers, rather than the 525-116 kit.
Friday, April 14, 2017
  1. Added the note (order P/N 525-745) to the 510-837 head cushion foam spacer assembly and separated the nose block pad from the nose block device.
Tuesday, June 20, 2017
  1. Created modular BlowApart.
Friday, April 13, 2018
  1. Corrected part numbers 510-760 to 510-759 and 505-730 to 505-729 and their associated descriptions.
Wednesday, May 30, 2018
  1. Updated the appearance of the 510-759 SL 27 Tri Valve exhaust main body.
Appendix - [Low Resolution]
Thursday, December 10, 2015
  1. Updated torque specs throughout and changed type of Loctite® required on several parts.
Thursday, May 19, 2016
  1. Updated torque specs throughout and changed type of Loctite® needed.
Wednesday, July 20, 2016
  1. Updated the KM 57 location numbers and the 455 balanced regulator's P/N 530-099 Cover Retainer Screw torque.
Thursday, December 29, 2016
  1. Updated to accommodate the modularized BlowAparts.
Monday, April 24, 2017
  1. Updated the KM 47 locations due to its new modularity.
Tuesday, June 20, 2017
  1. Updated to accommodate the newly modular KMB 18, 28, SL 17B and 27 BlowAparts.
Monday, August 14, 2017
  1. Added note 3, allowable deviation: ± 8%.
Wednesday, August 23, 2017
  1. Updated communications BlowApart location numbers.
Tuesday, October 3, 2017
  1. Added P/N 550-560 Adjustment Lock Nut, REX to REX torque specs.
Friday, November 3, 2017
  1. Updated torque specs for the port retainer adapter and screw.
Thursday, March 15, 2018
  1. Added P/N 550-116 Nose Block Guide to fiberglass helmets and BandMask and updated location numbers due to adding the P/N 550-577 nose block guide to stainless steel helmets.
Tuesday, May 22, 2018
  1. Updated location numbers due to the removal of the P/N 550-076 inlet valve on the SuperFlow 350 BlowApart.
SuperFlow® 350 BlowAparts - [Low Resolution]
Friday, November 3, 2017
  1. Updated material coloring.
Tuesday, May 22, 2018
  1. Removed P/N 550-076 inlet valve.
M-48 SuperMask - Low Resolution
Thursday, October 15, 2015
  1. Updated with CE information.
,
Friday, June 24, 2016
  1. Updated content throughout user guide.
,
Thursday, September 8, 2016
  1. Updated the checklists.
,
Friday, October 14, 2016
  1. Updated with CE information.
,
Monday, October 17, 2016
  1. Updated with CE information.
,
Friday, February 10, 2017
  1. Removed reference to serial number location.
,
Wednesday, November 8, 2017
  1. Updated the P/N 805-015 Scuba Pod BlowApart.
,
Tuesday, May 15, 2018
  1. Removed duplicate section, "Communications with the M-48 SuperMask®" and added, "Secure using KMDSI tie wrap P/N 520-038" to section of same name.
M-48 Mod-1 User Guide - Low Resolution
Thursday, December 17, 2015
  1. Updated throughout, including the updated mask skirt.
,
Thursday, May 5, 2016
  1. Updated content throughout user guide.
,
Friday, May 13, 2016
  1. Removed and updated content
,
Thursday, September 8, 2016
  1. Updated the checklists.
,
Friday, October 14, 2016
  1. Updated with CE information.
,
Monday, October 17, 2016
  1. Updated with CE information.
,
Wednesday, November 8, 2017
  1. Updated the P/N 805-015 Scuba Pod BlowApart.
,
Tuesday, January 2, 2018
  1. Updated the pagination and table of contents flow issue.
,
Tuesday, May 15, 2018
  1. Added, "Secure using KMDSI tie wrap P/N 520-038" to section, "Communications with the M-48 MOD-1."
Quad Valve and Tri-Valve® Exhaust - [Low Resolution]
Monday, March 2, 2015
  1. Updated with front stand offs.
Tuesday, September 6, 2016
  1. Updated with correct parting line assembly instructions.
Friday, March 23, 2018
  1. Updated Quad Valve Exhaust Valve Replacement section, diagrams and layout.
Inspection and Maintenance - [Low Resolution]
Thursday, May 3, 2018
  1. Split introduction module into four separate modules.
General Preventative Maintenance - [Low Resolution]
Thursday, May 3, 2018
  1. Split introduction module into four separate modules.
Description and Operational Specifications - [Low Resolution]
Thursday, May 3, 2018
  1. Split introduction module into four separate modules.
Weights - [Low Resolution]
Friday, May 4, 2018
  1. Updated layout.
SuperFlow® Regulator - [Low Resolution]
Wednesday, March 18, 2015
  1. No changelog available for manuals.
Friday, May 4, 2018
  1. Updated layout, diagrams and removed references to specific torque specs.
455 Balanced Regulator - [Low Resolution]
Tuesday, June 3, 2014
  1. Added explanation regarding the two LP plugs in the 455 regulator body.
  2. Various grammatical corrections.
Friday, December 9, 2016
  1. Updated wrench size from 1" to 15/16" in step six in 1.1.5 455 Balanced Regulator Bias Adjustment Field Service with Demand Regulator on Helmet.
Friday, May 4, 2018
  1. Updated the layout and cross references due to splitting the INTRO module into four separate modules.
SuperFlow® 450 Regulator - [Low Resolution]
Tuesday, January 19, 2016
  1. No changelog available for manuals.
Friday, May 4, 2018
  1. Updated the layout, diagrams and cross references due to splitting the INTRO module into four separate modules.
SuperFlow® 350 Regulator - [Low Resolution]
Monday, March 2, 2015
  1. Updated with front stand offs.
Friday, May 4, 2018
  1. Updated the layout, diagrams and cross references due to splitting the INTRO module into four separate modules.
Stainless Steel Side Block - [Low Resolution]
Monday, May 4, 2015
  1. Updated with auxiliary port and front stand offs.
Friday, May 4, 2018
  1. Updated layout, diagrams and removed references to specific torque specs.
Handle on Stainless Steel Helmets - [Low Resolution]
Tuesday, March 3, 2015
  1. Updated with auxiliary port and front standoffs.
Friday, May 4, 2018
  1. Updated layout.
Snap Tabs, Chin Strap, Swing Catch, Sealed Pull Pins Stainless Steel - [Low Resolution]
Monday, April 27, 2015
  1. Updated with auxiliary port and front stand offs.
Wednesday, November 8, 2017
  1. Added the pull pin overhaul and pull pin sleeve sections.
Friday, May 4, 2018
  1. Updated layout, diagrams and removed references to specific torque specs.
SL 27® Water Dump - [Low Resolution]
Monday, March 2, 2015
  1. Updated with front stand offs.
Friday, May 4, 2018
  1. Updated layout.
Brass/Chromed Brass Side Block - [Low Resolution]
Monday, May 4, 2015
  1. Updated with front stand offs.
Friday, September 15, 2017
  1. Added free flow section.
Friday, December 29, 2017
  1. Added Air Train, Applying RTV Silicone KMB 28 section.
Thursday, May 3, 2018
  1. Updated the layout and cross references due to splitting the INTRO module into four separate modules.
Stainless Steel Helmets with REX Pod - [Low Resolution]
Friday, February 27, 2015
  1. Updated with front stand offs and auxiliary port.
Tuesday, August 2, 2016
  1. Updated module throughout.
Thursday, May 3, 2018
  1. Updated layout.
REX Regulator and Oral Nasal - [Low Resolution]
Friday, February 27, 2015
  1. Updated with front stand offs and auxiliary port.
Thursday, May 3, 2018
  1. Updated layout.
Overpressure Relief Valve - [Low Resolution]
Thursday, May 3, 2018
  1. Updated layout and diagram.
Oral Nasal Mask (350/450/455) - [Low Resolution]
Thursday, May 3, 2018
  1. Updated layout and diagram.
Neck Ring Assembly, Locking Collar and Front Stand Offs - [Low Resolution]
Friday, August 12, 2016
  1. Added the front stand offs.
Thursday, May 3, 2018
  1. Updated layout.
Hot Water Shroud - [Low Resolution]
Thursday, May 3, 2018
  1. Updated layout and removed references to specific torque specs.
Head Cushion, Head Cushion Foam Spacer (HCFS) and Chin Cushion - [Low Resolution]
Friday, May 8, 2015
  1. Updated with auxiliary port and front stand offs.
Friday, April 14, 2017
  1. Updated entire module throughout, including new procedures for head cushion stuffing along with new images to accompany.
Thursday, May 3, 2018
  1. Updated layout.
Handle on Fiberglass Helmets - [Low Resolution]
Friday, February 27, 2015
  1. Updated with front stand offs.
Thursday, May 3, 2018
  1. Updated layout.
Face Port, Port Retainer and Nose Block - [Low Resolution]
Friday, August 8, 2014
  1. Updated Loctite® use for stainless steel helmets only in section 1.1.4 Face Port and Port Retainer Replacement, step 5.
Friday, February 27, 2015
  1. Updated with front stand offs.
Thursday, May 3, 2018
  1. Update title, layout and diagram.
General Information KMDSI Products - [Low Resolution]
Thursday, May 21, 2015
  1. Updated with current configurations of the MOD-1 and SuperMask and updated photos throughout module.
Tuesday, August 18, 2015
  1. Updated with current configurations of the MOD-1 and SuperMask and updated photos throughout module.
Friday, October 14, 2016
  1. Updated CE information and EXO product photo.
Monday, October 24, 2016
  1. Updated CE information.
Tuesday, January 31, 2017
  1. Added front cover page.
Tuesday, April 18, 2017
  1. Added serial number and CE diagrams for the SuperFlow, SuperFlow 350 and 455 regulators. Updated the packaging procedures for Band Masks.
Friday, September 15, 2017
  1. Added free flow section.
Thursday, May 3, 2018
  1. Split introduction module into four separate modules.
Communications, Modular - [Low Resolution]
Monday, May 4, 2015
  1. Updated with auxiliary port and front stand offs.
Thursday, May 3, 2018
  1. Updated layout.
Chin Strap, Sealed Pull Pins and Swing Catch for Fiberglass Helmets - [Low Resolution]
Tuesday, September 22, 2015
  1. Updated the verbiage throughout, including to service sealed pull pins annually.
Wednesday, November 8, 2017
  1. Added the pull pin overhaul and pull pin sleeve sections.
Thursday, May 3, 2018
  1. Updated layout.
Bent Tube - [Low Resolution]
Friday, September 12, 2014
  1. Added bent tube procedures for the REX regulator.
Monday, March 2, 2015
  1. Updated with front stand offs.
Tuesday, June 27, 2017
  1. Divided the module into three main sections based on regulator and updated the procedures.
Thursday, May 3, 2018
  1. Updated the layout and cross references due to splitting the INTRO module into four separate modules.
BandMask Tri-Valve Exhaust - [Low Resolution]
Tuesday, September 6, 2016
  1. Updated with correct parting line assembly instructions.
Thursday, May 3, 2018
  1. Corrected title from, "Band Mask" to "BandMask." Updated layout and diagrams.
BandMask Hood, Face Seal, Band Keepers and Head Harness - [Low Resolution]
Friday, September 8, 2017
  1. Added the Band Mask hood and molded face seal replacement and replacing a molded face seal sections. Added the updated hood and molded face seal sizing guide.
Thursday, May 3, 2018
  1. Updated layout.
Accessories - [Low Resolution]
Thursday, May 3, 2018
  1. Updated layout.
Stainless Steel Helmets with SuperFlow® 350 or 455 Balanced Regulator Pod - [Low Resolution]
Monday, March 2, 2015
  1. Updated with auxiliary port and front stand offs.
Monday, August 1, 2016
  1. Updated module throughout.
Thursday, May 3, 2018
  1. Changed title to correct 455 product name and layout.
17C Handle and Side Weight - [Low Resolution]
Thursday, May 14, 2015
  1. Updated with front stand offs.
Thursday, May 3, 2018
  1. Updated layout and diagram.
17B Handle and Weights - [Low Resolution]
Thursday, May 3, 2018
  1. Updated layout and diagram.
17B Head Cushion - [Low Resolution]
Thursday, May 3, 2018
  1. Updated layout.
SuperLite® 17B Neck Clamp Area - [Low Resolution]
Tuesday, February 27, 2018
  1. Removed references to specific torque specs, updated the appearance of the ANSI signal blocks and updated the BlowApart diagram.
Thursday, May 3, 2018
  1. Updated layout.
Communications on SuperLite® 17B and 17C Helmets, KMB 18 and 28 BandMasks® - [Low Resolution]
Tuesday, May 12, 2015
  1. Updated wiring diagram.
Thursday, May 3, 2018
  1. Updated layout and diagrams.
KM 97 Blowaparts [Low Resolution]
Monday, May 23, 2016
  1. Added the additional port on the stainless steel side block.
Friday, August 5, 2016
  1. Added the front stand off, associated screw part number and the complete kit part numbers.
Tuesday, September 20, 2016
  1. Switched the 510-796 exhaust valve back to the 510-776.
Wednesday, November 23, 2016
  1. Created modular BlowAparts.
Friday, April 14, 2017
  1. Added the note (order P/N 525-745) to the 510-837 head cushion foam spacer assembly and added note that the nose block device includes the nose block pad.
Wednesday, May 10, 2017
  1. Updated description on the 550-574 from, "spacer" to "sleeve" and updated the appearance of some components.
Wednesday, March 14, 2018
  1. Added in the P/N 550-577 Nose Block Guide and removed the 540-563 Port Retainer.
KM 77 Blowaparts - [Low Resolution]
Monday, May 23, 2016
  1. Added the additional port on the stainless steel side block.
Friday, August 5, 2016
  1. Added the front stand off, associated screw part number and the complete kit part numbers.
Wednesday, November 23, 2016
  1. Created modular BlowAparts.
Friday, April 14, 2017
  1. Added the note (order P/N 525-745) to the 510-837 head cushion foam spacer assembly and added note that the nose block device includes the nose block pad.
Wednesday, May 10, 2017
  1. Updated the appearance of components to maintained consistency with the other stainless steel helmets.
Wednesday, March 14, 2018
  1. Added in the P/N 550-577 Nose Block Guide and removed the 540-563 Port Retainer.
KM 37SS Blowaparts - [Low Resolution]
Monday, May 23, 2016
  1. Added the additional port on the stainless steel side block.
Friday, August 5, 2016
  1. Added the front stand off, associated screw part number and the complete kit part numbers.
Wednesday, November 23, 2016
  1. Created modular BlowAparts.
Friday, April 14, 2017
  1. Added the note (order P/N 525-745) to the 510-837 head cushion foam spacer assembly and added note that the nose block device includes the nose block pad.
Wednesday, May 10, 2017
  1. Updated description on the 550-574 from, "spacer" to "sleeve" and updated the appearance of some components.
Wednesday, March 14, 2018
  1. Added in the P/N 550-577 Nose Block Guide and removed the 540-563 Port Retainer.
100-813 User Guide - Low Resolution
Tuesday, March 13, 2018
  1. Updated the Rebreather Pod and Switchover Regulator BlowAparts in the back of the user guide and removed references to BlowApart locations within the text.
100-820 User Guide - Low Resolution
Friday, December 29, 2017
  1. Updated the BlowApart of the switchover regulator.
,
Tuesday, March 13, 2018
  1. Updated the BlowApart of the switchover regulator.
KM 47 Blowaparts - [Low Resolution]
Tuesday, November 8, 2016
  1. Added the front stand offs and accompanying screw as separate part numbers, rather than the 525-116 kit.
Friday, April 14, 2017
  1. Added the note (order P/N 525-745) to the 510-837 head cushion foam spacer assembly, added note that the nose block device includes the nose block pad and created modular BlowAparts.
Thursday, March 8, 2018
  1. Corrected the bent tube assembly w/O-rings part number from 555-155 to 555-168
805-015 SCUBA Pod - Low Resolution
Thursday, January 7, 2016
  1. Purchasable parts, added the P/N 520-039 Tie Wrap and added the 805-026 BlowApart.
Friday, January 29, 2016
  1. Added the Air Inlet Swivel P/N 305-017.
Wednesday, April 6, 2016
  1. Corrected location numbers.
Wednesday, July 6, 2016
  1. Updated the description for the P/N 820-126 Hinge Mount, Pod Lock
Thursday, August 24, 2017
  1. Removed pinch to purge and replaced with tilt to purge.
Switchover Regulator BlowApart - [Low Resolution]
Tuesday, October 17, 2017
  1. Updated appearance and layout of the switchover regulator.
Friday, February 16, 2018
  1. Added the P/N 220-078 Cap, Threaded, Hose Inlet and 410-151 O-ring.
Rebreather Pod BlowApart 805-080 - [Low Resolution]
Friday, February 16, 2018
  1. Added the P/N 810-027 mouthpiece, P/N 820-009 cap and combined like parts.
SL 17B BlowAparts - [Low Resolution]
Friday, May 13, 2016
  1. Updated earphones, microphone and communications set.
Friday, April 14, 2017
  1. Added the note (order P/N 525-745) to the 510-837 head cushion foam spacer assembly and added note that the nose block device includes the nose block pad.
Tuesday, June 20, 2017
  1. Created modular BlowApart.
Wednesday, November 1, 2017
  1. Corrected the head cushion, head cushion bag and helmet shell part numbers
Thursday, December 28, 2017
  1. Corrected the Regulator Mount Nut from P/N 550-081 to P/N 550-038.
100-401 User Guide - Low Resolution
Thursday, June 9, 2016
  1. No Changelogs Available for User Guide.
100-120 User Guide - Low Resolution
Monday, April 25, 2016
  1. Removed CE certification.
,
Thursday, October 20, 2016
  1. Added clarification about CE status.
,
Tuesday, August 15, 2017
  1. Updated CE Verbiage.
,
Friday, December 8, 2017
  1. Updated the plastic adjustable second stage scuba regulator P/N 305-166 and plastic non-adjustable second stage scuba regulator (octopus) Part # 305-171 BlowApart.
455 Balanced Regulator BlowApart - [Low Resolution]
Tuesday, September 20, 2016
  1. Switched the 510-796 exhaust valve back to the 510-776.
Wednesday, December 28, 2016
  1. Removed "for the KM 97 Helmet" from the main description.
Tuesday, November 28, 2017
  1. Updated the material on the balance spacer.
Balanced SCUBA BlowApart 200-120 - [Low Resolution]
Tuesday, January 3, 2017
  1. Added note that the flow sleeve is not a removable part.
Tuesday, November 28, 2017
  1. Updated the material color of the balance spacer and P/N 250-065 washer.
Plastic Second Stage SCUBA Regulator Blowapart - [Low Resolution]
Wednesday, September 20, 2017
  1. Switched the spring to the opposite side of the inlet valve. Updated the part number for the O-ring that's installed on the scuba inlet nipple.
SuperFlow Scuba Non-Adjustable BlowApart Octopus - [Low Resolution]
Wednesday, September 20, 2017
  1. Switched the spring to the opposite side of the inlet valve. Updated the part number for the O-ring that's installed on the scuba inlet nipple.
Neck Ring Assemblies - [Low Resolution]
Wednesday, November 23, 2016
  1. No Changelog Available for BlowAparts.
Communication Assemblies - [Low Resolution]
Thursday, August 10, 2017
  1. Added the microphone assembly into the BlowApart.
Side Block - [Low Resolution]
Wednesday, November 23, 2016
  1. No Changelog Available for BlowAparts.
505-008 SL 17A/B Neck Clamp/Yoke Assembly - [Low Resolution]
Tuesday, June 20, 2017
  1. No Changelog Available for BlowAparts.
KMB 28 BlowApart - [Low Resolution]
Tuesday, June 20, 2017
  1. Created modular BlowApart and separated the KMB 18 and 28 into separate BlowAparts.
KMB 18 BlowApart - [Low Resolution]
Wednesday, April 6, 2016
  1. Updated the KMB hood assembly, earphones, microphone and communications set part numbers and added in the face seal.
Tuesday, June 20, 2017
  1. Created modular BlowApart and separated the KMB 18 and 28 into separate BlowAparts.
SuperFlow Regulator - [Low Resolution]
Tuesday, June 20, 2017
  1. No Changelog Available for BlowAparts.
100-134 User Guide - Low Resolution
Tuesday, February 21, 2017
  1. Added extra pages, including a second maintenance record page, for printing pagination purposes.
,
Monday, June 19, 2017
  1. Corrected the orientation of the adapter in the BlowApart image.
100-131 User Guide - Low Resolution
Thursday, January 26, 2017
  1. Updated content throughout.
,
Friday, May 19, 2017
  1. Fixed pagination issue.
KM 37 BlowAparts - [Low Resolution]
Tuesday, November 8, 2016
  1. Added the front stand offs and accompanying screw as separate part numbers, rather than the 525-116 kit.
Wednesday, November 23, 2016
  1. Created modular BlowAparts.
Friday, April 14, 2017
  1. Added the note (order P/N 525-745) to the 510-837 head cushion foam spacer assembly and added note that the nose block device includes the nose block pad.
SL 17C Blowaparts - [Low Resolution]
Friday, May 13, 2016
  1. Updated earphones, microphone and communications set.
Tuesday, November 8, 2016
  1. Added the front stand offs and accompanying screw as separate part numbers, rather than the 525-116 kit.
Wednesday, November 23, 2016
  1. Created modular BlowAparts.
Friday, April 14, 2017
  1. Added the note (order P/N 525-745) to the 510-837 head cushion foam spacer assembly and added note that the nose block device includes the nose block pad.
KM 57 BlowAparts - [Low Resolution]
Friday, March 3, 2017
  1. Created modular BlowAparts.
Friday, April 14, 2017
  1. Added the note (order P/N 525-745) to the 510-837 head cushion foam spacer assembly and added note that the nose block device includes the nose block pad.
M-48 SuperMask - Low Resolution
Thursday, April 13, 2017
  1. Removed 805-030 Harness, non-stretch (obsolete) and "*Indicates parts for general sale."
Copyright - [Low Resolution]
Friday, March 3, 2017
  1. Replaced raw text file with a PDF file.
SuperFlow® 450 Regulator BlowApart - [Low Resolution]
Monday, January 23, 2017
  1. Updated internal components.
REX Regulator - [Low Resolution]
  1. No changelog available for BlowAparts.
Stainless Steel Side Block - [Low Resolution]
Wednesday, November 23, 2016
  1. No Changelog Available for BlowAparts.
Stainless Steel Locking Collar - [Low Resolution]
Wednesday, November 23, 2016
  1. No Changelog Available for BlowAparts.
SL 17C and 27 Neck Ring Assemblies - [Low Resolution]
Wednesday, November 23, 2016
  1. No Changelog Available for BlowAparts.
805-026 SCUBA Pod w/Balanced Purge Tube - Low Resolution
Wednesday, July 6, 2016
  1. Updated the description for the P/N 820-126 Hinge Mount, Pod Lock
Metal Second Stage SCUBA Regulator Blowapart - [Low Resolution]
  1. No changelog available for blowaparts at this time.
Manifold Block - Low Resolution
Thursday, August 27, 2015
  1. Removed the overpressure relief valve from the manifold block.
EXO Standard and Original BlowApart - [Low Resolution]
  1. No changelog available for BlowAparts.
M-48 Mod-1 - Low Resolution
Thursday, December 17, 2015
  1. Updated throughout, including the updated mask skirt.