Home > News > Kirby Morgan News

Kirby Morgan News

Search News
Thursday, May 30, 2019
How To Install an Earphone and Microphone on Communications Module (MWPC)
Step by step instructions about how to install an earphone and microphone on the new Kirby Morgan Communications Module with Male Waterproof Connector. Visit bulletin #2 of 2019 for detailed information about the new parts here
Thursday, May 2, 2019
New Kirby Morgan® Modular Communications
Kirby Morgan® introduces a newly designed communication module, new strip assembly and strip retainer plate. Your existing male waterproof connector or two wire posts will work with the newly designed parts. The newly designed communication assembly will be a direct replacement of the older style. The new communications body has thicker module walls, adding to the strength of the module, and a removable strip assembly. This removable strip... Read More
Tuesday, April 30, 2019
What is a water shroud?
What exactly is a Water Shroud? For years Kirby Morgan has been interested in the advantages of a water shroud that incorporates a constant water supply to create a flushing mechanism. Introducing the newly released Kirby Morgan 525-761 Water Shroud Kit for the KM 97. As a steady supply of “clean” water is fed to the side block, the 525-761 Water Shroud Kit blocks the surrounding water as well as unwanted debris from coming in contact with the... Read More
Friday, April 19, 2019
How To: Conversion Kit, 455 Regulator for KM 37, KM 57, SL 17C or SL 27® Helmet
Step by step instructions about how to convert your Kirby Morgan Superflow® 350 Regulator to 455 Balanced Regulator on a KM 37, KM 57, SL 17C, or SL 27®. Visit the 525-765 Conversion Kit, 455 Regulator For 350/450 Regs here
Monday, February 25, 2019
Kirby Morgan M-48 Mod-1 Hood
An attachable hood kit is now available for the M-48 MOD-1 modular full face mask. The hood is attached to the mask with brackets and screws. A short rear zipper and earphone pockets are standard. The hood is made out of 5 mm YAMAMOTO neoprene. The kit is available in two sizes: small/medium and large/extra large. The kit is sold separately and will not be installed by Kirby Morgan®. The new hood is only for the M-48 MOD-1 and will not fit the M... Read More
Monday, February 25, 2019
How to Install the M-48 Mod-1 Hood Assembly Kit
An attachable hood kit is now available for the M-48 MOD-1 modular full face mask. The hood is attached to the mask with brackets and screws. A short rear zipper and earphone pockets are standard. The hood is made out of 5 mm YAMAMOTO neoprene. The kit is available in two sizes: small/medium and large/extra large. The kit is sold separately and will not be installed by Kirby Morgan®. The new hood is only for the M-48 MOD-1 and will not fit the M... Read More
Friday, January 4, 2019
How to Replace a Kirby Morgan Earphone
Step by step instructions about how to replace earphone speakers on Kirby Morgan communication assemblies. Both English and Spanish versions are included.
Wednesday, January 2, 2019
How It's Made Kirby Morgan Bishop Pin
New series by Kirby Morgan showing a behind the scenes look at how high quality genuine parts are made. Bishop Pins (Part #550-074) are used in our new water shroud kit for the KM97 to help hold the access cover shut over the regulator shroud. Bishop Pins will also be used in future products. For more details, please go to the Water Shroud Kit for the Kirby Morgan® 97.
Friday, December 21, 2018
Kirby Morgan Water Shroud Kit for KM 97 Helmets
Kirby Morgan® introduces the Water Shroud Kit for the KM 97. The water shroud kit can be used for both traditional hot water applications and in dirty or debris laden water, using a constant water supply for increased protection of key helmet components.
Monday, November 12, 2018
How To Clean and Maintain Kirby Morgan Stainless Steel Products
Step by step instructions for how to clean and maintain Kirby Morgan stainless steel helmet shells and other products.
Friday, November 9, 2018
How To Install a Kirby Morgan 97 Water Shroud Kit
Step by step instructions for how to install the new Kirby Morgan® 97 Water Shroud Kit. While this kit is specific to the KM 97, additional kits in the future will be available for the SL 17C, 27® and KM 37 Helmets, KMB® 18 and 28 BandMasks that are equipped with a 455 Balanced Regulator.
Monday, October 1, 2018
How To Stuff and Install a Kirby Morgan Head Cushion
Step by step instructions for how to stuff and install a Kirby Morgan® Head Cushion. Both English and Spanish versions are included.
Wednesday, August 29, 2018
How To Check The Kirby Morgan One Way Valve
There are two ways to check a one way valve on a Kirby Morgan Dive Helmet or BandMask®. The one way valve should be checked prior to the start of diving or every 24 hours if in continuous use. Oral One Way Valve Check -Test the one way valve for proper operation by blowing and sucking (cycling) on the umbilical adapter. No gas should be drawn through the one way valve. If you are able to suck any air through the one way valve, it is not working... Read More
Tuesday, August 7, 2018
How To Install a Kirby Morgan BandMask Hood
Step by step instructions for how to install a Kirby Morgan® BandMask® Hood.
Tuesday, June 19, 2018
How To Mount Open Circuit Regulators to a Kirby Morgan Scuba POD
Step by step instructions about how to mount open circuit regulators to a Kirby Morgan Scuba Pod.
Monday, June 11, 2018
Kirby Morgan Bulletin #2 of of 2018
Kirby Morgan has modified the design of the SL 27® Tri Valve Exhaust Main Body, P/N 510-759, for an improved fit. There is no change in part number. The re-designed 510-759 Exhaust Main Body has been shipping on SuperLite® 27® Helmets since February this year. There is no change in price for the 510-759 Tri Valve Exhaust Main Body. No exchange program will be offered for this part or any of the products listed above. Please contact your local... Read More
Friday, May 18, 2018
How To Remove a Kirby Morgan BandMask® Hood
Step by step instructions for how to remove a Kirby Morgan BandMask® 28 Hood with 455 balanced regulator.
Friday, May 4, 2018
How To replace a Kirby Morgan Molded Face Seal
How To: Kirby Morgan Molded Face Seal Replacement

Pages