Home > Products > Full Face Masks > EXO-BR Mask


Error message

  • No longer in production. Spares are available.

EXO-BR Top Tab


The EXO Full Face Mask was designed for both surface supplied and scuba diving.

By enclosing the diver's eyes, nose and mouth, the EXO permits nearly normal speech when used in conjunction with most wireless, and all hardwire underwater communication systems. Its light weight design allows divers to work long dives without jaw or neck fatigue. This mask has a modular communications design that permits rapid and simple maintenance. An optional Hard Shell gives added surfaces for mounting lights, cameras etc. The ear equalization device, a nose block which is adjustable to several different heights, fits a wide variety of noses and faces. The oral nasal helps keep the CO2 levels to a minimum and improves breathing and communications.

The BALANCED REGULATOR EXO-BR was developed to meet strict new European CE requirements.and is fully CE approved as well as U.S. Navy approved. It meets and surpasses EN 250 requirements for regulator performance. The EXO-BR frame is the same safety yellow as the standard SuperLite Helmets and KMB 18 Bandmasks.

The EXO-BR Balanced Regulator helps reduce the work of breathing for the diver. The regulator balances the intermediate air pressure against the valve sealing pressure inside the regulator. This enables the regulator to instantly adjust to changes in line pressure. The Balanced Regulator provides improved breathing and is adjustable for a wide range of intermediate pressures between 100 PSI - 230 PSI.


  • 300-036 EXO-BR Mask, No Comms.
  • 300-037 EXO-BR w/Comm. Posts
  • 300-038 EXO-BR w/Comm. MWP
  • EXO-BR Masks


  • The type of hood that a diver chooses may have direct bearing on the fit and comfort of the EXO®. Excess material on the chin and or jaw will keep the mask from positioning properly and possibly cause jaw fatigue. This may also prevent the diver's face from getting far enough into the mask for equalizing by pinching the nose. When using a dry suit with a latex hood, no adjustment should be needed. However, if the hood covers too much of your face, it may be necessary to trim a small amount of rubber off the chin on the hood. If using a neoprene wet suit hood, you may want to trim material from the cheek bone downward to under the front part of the chin. KMDSI manufacturers a hood perfectly tailored to the EXO® Full Face masks. It has thinner face seal material on the front as opposed to the thicker material of normal types of hoods, for better fit and comfort. Cold Water (CW) versions are also available. These have a large "bib" that tucks into the divers wet suit.

Standard Hoods

Part No. Description Neck Size Chin Size Head Size
310-030 Small 15" 21" 22.5"
310-031 Medium 16" 21.5" 23.5"
310-032 Large 17" 22" 24.5"

Cold Water Hoods

Part No. Description Neck Size Chin Size Head Size
310-035 Small 15" 21" 22.5"
310-037 Medium 16" 21.5" 23.5"
310-039 Large 17" 22" 24.5"