Home > Products > Helmets > Kirby Morgan 37SS

Kirby Morgan 37SS

Body: 

KM37ss Top Tab

  • Manual KM 37SS
    This is your operations and maintenance manual. It is a writable USB flash drive which enables you to add or subtract the manual PDF sections as they are updated or when you purchase new Kirby Morgan products.
  • Logbook w/ pen
  • Helmet/Mask Bag

    Measurements: 16’’ length x 12’’ width x 16’’ height. Made of high quality, tough black nylon, encasing a light weight, white polyethylene foam that features low water absorption and is fairly rigid (good impact strength). The two grommeted ventilation holes seen in the photo are on both sides of the bag. A large elastic topped pocket is on each side, for holding tool kits, checklists, logbooks, spares, etc. (There are no inside pockets). The bag handles are 1” wide straps of black polyester webbing. The bag closes up with two, large YKK zippers. We do not recommend the 500-901 helmet bag as a shipping container or packaging for your Kirby Morgan life support equipment!

CE Logo

km37ss_tabber

  • Neck Ring Assembly
    Neck Ring Assembly, Small, S.S.
    Part# 505-745
  • Neck Ring Assembly
    Neck Ring Assembly, Medium, S.S.
    Part# 505-746
  • Neck Ring Assembly
    Neck Ring Assembly, Large, S.S.
    Part# 505-747
  • Neck Ring Assembly
    Neck Ring Assembly, X-L, S.S.
    Part# 505-749
  • Neck Dam, Small
    Neck Dam, Small
    Part# 510-627
  • Neck Dam, Medium (Standard)
    Neck Dam, Medium (Standard)
    Part# 510-628
  • Neck Dam, Large
    Neck Dam, Large
    Part# 510-629
  • Latex Neck Dam, Small/Medium
    Latex Neck Dam, Small/Medium
    Part# 510-631
  • Latex Neck Dam, Medium/Large
    Latex Neck Dam, Medium/Large
    Part# 510-633
  • Cold Water Neck Dam
    Cold Water Neck Dam, Small
    Part# 510-674
  • Cold Water Neck Dam, Medium
    Cold Water Neck Dam, Medium
    Part# 510-675
  • Cold Water Neck Dam, Large
    Cold Water Neck Dam, Large
    Part# 510-676
  • Chin Cushion
    Chin Cushion
    Part# 510-683
  • Neck Dam, X-Large
    Neck Dam, X-Large
    Part# 510-688
  • Latex Neck Dam, X-Large
    Latex Neck Dam, X-Large
    Part# 510-689
  • Oral Nasal Mask
    Oral Nasal Mask
    Part# 510-747
  • Head Cushion Assembly
    Head Cushion Assembly
    The fit of the head cushion is critical to both comfort and safety. The head cushion should be adjusted so that it assists in the proper seal of the oral nasal mask to the face. The head cushion is one out of a three part system. The Earphone holes are no longer present in the side pieces, but may be cut if the user prefers. The material is laser cut to prevent the edges from fraying or unraveling and has a handy loop attached to the liner for hanging and drying.
    Part# 510-754
  • Communication Assembly with Post
    Communication Assembly with Post
    Part# 515-023
  • Communications Assembly with MWPC
    Communications Assembly with MWPC
    Part# 515-024
  • Communications Kit for all Helmets and Band Masks
    Communications Kit for all Helmets and Band Masks
    Part# 515-033
  • Regulator Flange Kit
    Part# 525-027
  • Whisker Clamp Replacement Kit
    Whisker Clamp Replacement Kit
    Part# 525-032
  • Front Standoff Kit
    Part# 525-116
  • Sealed Pull Pin Overhaul Kit
    Part# 525-211
  • Regulator Rebuild Kit
    525-309 Regulator Rebuild Kit
    For Helmets & KMB-BandMasks® with the “A”/“B” or SuperFlow® 350 Regulator.
    Part# 525-309
  • Side Block Rebuild Kit
    Side Block Rebuild Kit
    Part# 525-313
  • One Way Valve Kit
    One Way Valve Kit
    Part# 525-330
  • Anode Kit, All SS Helmets
    Anode Kit, All SS Helmets
    Part# 525-375
  • Soft Goods Overhaul Kit, KM 37SS
    Soft Goods Overhaul Kit, KM 37SS
    Part# 525-380
  • Helmet Spares Kit, KM 37SS
    Part# 525-381
  • Conversion Kit, REX Regulator for 37SS
    Part# 525-395
  • Regulator Tool Kit with Pouch
    Tool Kit with Pouch
    Part# 525-620
  • Head Cushion Foam Spacer (HCFS) Kit
    Part# 525-745
  • Replacement Foam Kit for 510-754 Head Cushion
    Part# 525-746
  • Pull Strap Assembly Kit
    Part# 525-770
  • SuperFlow® 350 Regulator Assembly Kit
    Part# 525-771