Home > Products > Regulators > Helmet & Mask Regulators > SuperFlow 350 Regulator

SuperFlow 350 Regulator

Body: 

SuperFlow350 Reg Top Tab

SuperFlow® 350 Regulator

The SuperFlow® & SuperFlow® 350 have been the benchmark in surface supplied demand regulators for more than 40 years and remain the most widely used helmet and BandMask® regulators.

The uncomplicated chrome plated all brass regulator is of a non- balanced and venturi assisted design that allows the diver a wide range of adjustment. This adjustment mechanism is compatible with all umbilical supply systems. The SuperFlow® inlet breathing tube inside diameter is 19mm. The SuperFlow® 350 inlet breathing tube inside diameter is 22mm. Both regulators are recommended for air and mixed gas diving where light to heavy work is required.

Part Number 525-771

  • SuperFlow 350
CE Logo

superflow350_tabber

Manual Low Resolution
AttachmentSize
SuperFlow® 350 Regulator1.47 MB
Manual Low Resolution
AttachmentSize
Copyright414.2 KB
Manual High Resolution
AttachmentSize
SuperFlow® 350 Regulator6.78 MB
Manual High Resolution
AttachmentSize
Copyright34.49 KB
Blowaparts High Resolution
AttachmentSize
SuperFlow® 350 BlowApart (high-res)1.16 MB
Blowaparts Low Resolution
AttachmentSize
SuperFlow® 350 BlowApart (low-res)658.96 KB
Manual Low Resolution
AttachmentSize
Derechos de propiedad intelectual39.98 KB
Manual High Resolution
AttachmentSize
Derechos de propiedad intelectual40.11 KB
Manual High Resolution
AttachmentSize
Regulador SuperFlow® 3506.76 MB
Manual Low Resolution
AttachmentSize
Regulador SuperFlow® 3501.46 MB
Regulador compensado 455 (455 Balanced Regulator) - [Low Resolution]
Tuesday, July 30, 2019
455 Balanced Regulator BlowApart - [Low Resolution]
Tuesday, September 20, 2016
  1. Switched the 510-796 exhaust valve back to the 510-776.
Wednesday, December 28, 2016
  1. Removed "for the KM 97 Helmet" from the main description.
Tuesday, November 28, 2017
  1. Updated the material on the balance spacer.
Friday, August 24, 2018
  1. Updated layout.
Thursday, May 9, 2019
  1. Updated location #10 from, "Order 205-020" to, "220-050SS" and updated the description to, "Inlet Valve, Stainless Steel Tube."
Friday, September 13, 2019
  1. Added critical components P/N 240-008 Lever Arm and P/N 550-533 Bent Tube Adapter.
455 Balanced Regulator - [Low Resolution]
Tuesday, June 3, 2014
  1. Added explanation regarding the two LP plugs in the 455 regulator body.
  2. Various grammatical corrections.
Friday, December 9, 2016
  1. Updated wrench size from 1" to 15/16" in step six in 1.1.5 455 Balanced Regulator Bias Adjustment Field Service with Demand Regulator on Helmet.
Friday, May 4, 2018
  1. Updated the layout and cross references due to splitting the INTRO module into four separate modules.
Wednesday, December 5, 2018
  1. Updated step 26 in section 1.3 455 Balanced Regulator Bias Adjustment Field Service with Demand Regulator on Helmet.
Friday, April 5, 2019
  1. Updated references to 1.3.1 Removal of the Bent Tube Assembly on pages 5 and 13, which is the correct regulator model.
Tuesday, June 25, 2019
  1. Updated the material of the 510-776 exhaust valve.
General Information KMDSI Products - [Low Resolution]
Thursday, May 21, 2015
  1. Updated with current configurations of the MOD-1 and SuperMask and updated photos throughout module.
Tuesday, August 18, 2015
  1. Updated with current configurations of the MOD-1 and SuperMask and updated photos throughout module.
Friday, October 14, 2016
  1. Updated CE information and EXO product photo.
Monday, October 24, 2016
  1. Updated CE information.
Tuesday, January 31, 2017
  1. Added front cover page.
Tuesday, April 18, 2017
  1. Added serial number and CE diagrams for the SuperFlow, SuperFlow 350 and 455 regulators. Updated the packaging procedures for Band Masks.
Friday, September 15, 2017
  1. Added free flow section.
Thursday, May 3, 2018
  1. Split introduction module into four separate modules.
Monday, April 1, 2019
  1. Removed CE certification from the SL 17B, KM 47 and 77 helmets.
Thursday, May 23, 2019
  1. Corrected the URL for the M-48 SuperMask in section 1.1 Introduction on page 9
Description and Operational Specifications - [Low Resolution]
Thursday, May 3, 2018
  1. Split introduction module into four separate modules.
Monday, April 8, 2019
  1. Updated CE info from Directive 89/686/EEC to Regulation (EU) 2016/425. Removed the SuperFlow regulator diagram. Added in serial number locations.
Wednesday, May 8, 2019
  1. Updated to include the 525-761 water shroud kit for the KM 97 in sections 1.4.3 Minimum Operating Temperature and 1.9.2 Hot Water Shroud (P/N 525-100) and Water Shroud (P/N 525-761). Corrected the Kirby Morgan phone number area code from (850) to (805) in section 1.3 Product Specifications and 1.6 Operational Specifications & Limitations. Updated the description of the water dump body from main exhaust body on page 10 in section 1.7 Helmet Features. Removed the sentence, "Unlike other Kirby Morgan helmets, no external restrictor is required" as this pertains to older A side blocks. Updated the amount of tools from four to five in 1.9.3 Special Regulator Tools for the SuperFlow® and the SuperFlow® 350 and added the regulator mount nut socket wrench.
Información general sobre los productos KMDSI (General Information KMDSI Products) - [Low Resolution]
Tuesday, July 30, 2019
Descripción y especificaciones de uso (Description and Operational Specifications) - [Low Resolution]
Tuesday, July 30, 2019
Derechos de propiedad intelectual (Copyright) - [Low Resolution]
Tuesday, July 30, 2019
Copyright - [Low Resolution]
Friday, March 3, 2017
  1. Replaced raw text file with a PDF file.