Home > Products > Spares

Spares

17B Header

Spares Kits Main

SuperLite® 17B

click to view

Kits_SL17B

  • SL-17 Neck Clamp/Yoke Assembly
    Part# 505-008
  • Latch Catch Assembly
    Latch Catch Assembly: Pull Pin Type
    Part# 505-010
  • Head Cushion, SL 17A/B
    Head Cushion, SL 17A/B
    The fit of the head cushion is critical to both comfort and safety. In general, the head cushion should be snug fitting and help hold the helmet to your head. The head cushion should also be adjusted so that it assists in the proper seal of the oral nasal mask to the face. Earphone holes are no longer present in the side pieces, but may be cut if the user prefers. The liner is made of a durable, nylon based material (black), plus, a webbing strap has been added to strengthen the snap mountings.
    Part# 510-521
  • SuperLite 17 Head Cushion Foam Replacement Kit
    Part# 510-523
  • SL-17A-B Neck Dam (pre-'84), Medium
    SL-17A/B Neck Dam (pre-'84), Medium
    Part# 510-528
  • SL-17A/B Cold Water Neck Dam (pre-'84), Large
    SL-17A/B Cold Water Neck Dam (pre-'84), Large
    Part# 510-530
  • SL-17A/B Cold Water Neck Dam (pre-'84), X-Large
    SL-17A/B Cold Water Neck Dam (pre-'84), Medium
    Part# 510-531
  • SL-17A/B Drawstring Neck Dam
    SL-17A/B Drawstring Neck Dam
    Part# 510-533
  • SL-17A/B Drawstring Neck Dam, XL
    SL-17A/B Drawstring Neck Dam, XL
    Part# 510-643
  • SL-17A-B Neck Dam (pre-'84), Small
    SL-17A/B Neck Dam (pre-'84), Small
    Part# 510-649
  • SL-17A/B Neck Dam (pre-'84), Large
    SL-17A/B Neck Dam (pre-'84), Large
    Part# 510-650
  • SL-17A/B Neck Dam (pre-'84), X-Large
    SL-17A/B Neck Dam (pre-'84), X-Large
    Part# 510-651
  • SL-17A/B Cold Water Neck Dam (pre-'84), Small
    SL-17A/B Cold Water Neck Dam (pre-'84), Small
    Part# 510-652
  • SL-17A/B Cold Water Neck Dam (pre-'84), X-Large
    SL-17A/B Cold Water Neck Dam (pre-'84), X-Large
    Part# 510-653
  • Oral Nasal, Small, SL 17 A/B
    Oral Nasal, Small, SL 17 A/B
    Part# 510-669
  • Oral Nasal Mask
    Oral Nasal Mask
    Part# 510-747
  • Communications Kit for all Helmets and Band Masks
    Communications Kit for all Helmets and Band Masks
    Part# 515-033
  • Terminal Block Kit
    Part# 515-061
  • O-Ring Kit, SL 17B/NS & MK-21
    Part# 525-023
  • Whisker Clamp Replacement Kit
    Whisker Clamp Replacement Kit
    Part# 525-032
  • Double Exhaust Kit for 17 A/B/K
    Part# 525-102
  • Double Exhaust Whisker
    Whisker Only, Double Exhaust for 17A/B/K

    For 17B helmets still equipped with the early style double exhaust (instead of the current Quad Valve) replacement double exhaust whiskers are still available.

    Part# 525-103
  • Insert Testing Block Kit
    Part# 525-115
  • Front Weight Kit for SL-17 and MK-21
    Part# 525-130
  • SL 17 Strap Kit
    Chin & Yoke Strap Kit
    The SL-17B Helmet ships with a low profile strap system designed to retain the helmet to the neck clamp/yoke assembly in the event these two main components accidentally become separated.
    Part# 525-234
  • Regulator Rebuild Kit
    525-309 Regulator Rebuild Kit
    For Helmets & KMB-BandMasks® with the “A”/“B” or SuperFlow® 350 Regulator.
    Part# 525-309
  • Side Block Rebuild Kit
    Side Block Kit
    Part# 525-311
  • Helmet Spares Kit for SL-17A/B
    Part# 525-317
  • One Way Valve Kit
    One Way Valve Kit
    Part# 525-330
  • Helmet Spares Kit for SL-17B N/S Mod. 1 Helmets
    Part# 525-345
  • Soft Goods Kit
    Part# 525-360
  • Regulator Tool Kit with Pouch
    Tool Kit with Pouch
    Part# 525-620
  • Tri-Valve® Exhaust Kit
    Tri-Valve® Exhaust Kit
    Part# 525-752
  • Quad Valve Exhaust Kit
    Quad Valve Exhaust Kit
    Part# 525-759
  • Quad-Valve Cover Kit for SL-17A/B/C/K and 37
    Part# 525-762
  • SuperFlow Regulator Assembly Kit
    SuperFlow® Regulator Assembly Kit
    Part# 525-773
  • ‘A’ Regulator Assembly Kit
    Part# 525-777

SuperLite® 27®

click to view

Kits_SL27

  • Neck Ring Assembly
    Neck Ring Assembly, 27, Small
    Part# 505-094
  • Neck Ring Assembly
    Neck Ring Assembly, 27, Latex
    Part# 505-095
  • Neck Ring Assembly
    Neck Ring Assembly, 27, Large
    Part# 505-097
  • Neck Ring Assembly
    Neck Ring Assembly, 27, Medium
    Part# 505-100
  • Neck Ring Assembly
    Neck Ring Assembly, 27, XL
    Part# 505-104
  • SL 27 Latex Neck Dam, Medium/Large
    SL 27 Latex Neck Dam, Medium/Large
    Part# 510-500
  • SL 27 Neoprene Neck Dam, Small
    SL 27 Neoprene Neck Dam, Small
    Part# 510-502
  • SL 27 Neoprene Neck Dam, Large
    SL 27 Neoprene Neck Dam, Large
    Part# 510-503
  • SL 27 Neoprene Neck Dam, Medium (Standard)
    SL 27 Neoprene Neck Dam, Medium (Standard)
    Part# 510-504
  • Oral Nasal Mask, 27, Small
    Oral Nasal Mask, 27, Small
    Part# 510-569
  • Replacement Foam Set
    Part# 510-672
  • SL 27 Latex Neck Dam, Small-Medium
    SL 27 Latex Neck Dam, Small/Medium
    Part# 510-678
  • SL 27 Neoprene Neck Dam, Small
    SL 27 Neoprene Neck Dam, Small
    Part# 510-679
  • SL 27 Neoprene Neck Dam, Medium
    SL 27 Neoprene Neck Dam, Medium
    Part# 510-680
  • SL 27 Neoprene Neck Dam, Large
    SL 27 Neoprene Neck Dam, Large
    Part# 510-681
  • Chin Cushion
    Chin Cushion
    Part# 510-683
  • SL 27 Neoprene Neck Dam, X-Large
    SL 27 Neoprene Neck Dam, X-Large
    Part# 510-687
  • Oral Nasal Mask, 27
    Oral Nasal Mask, 27
    Part# 510-690
  • Head Cushion Assembly
    Head Cushion Assembly
    The fit of the head cushion is critical to both comfort and safety. The head cushion should be adjusted so that it assists in the proper seal of the oral nasal mask to the face. The head cushion is one out of a three part system. The Earphone holes are no longer present in the side pieces, but may be cut if the user prefers. The material is laser cut to prevent the edges from fraying or unraveling and has a handy loop attached to the liner for hanging and drying.
    Part# 510-754
  • Communication Assembly with Post
    Communication Assembly with Post
    Part# 515-023
  • Communications Assembly with MWPC
    Communications Assembly with MWPC
    Part# 515-024
  • Communications Kit for all Helmets and Band Masks
    Communications Kit for all Helmets and Band Masks
    Part# 515-033
  • Regulator Flange Kit
    Part# 525-027
  • Whisker Clamp Replacement Kit
    Whisker Clamp Replacement Kit
    Part# 525-032
  • SL27 Swing Catch
    Swing Catch Retrofit Kit for 27
    Part# 525-106
  • Insert Testing Block Kit
    Part# 525-115
  • Front Standoff Kit
    Part# 525-116
  • Head Cushion Upgrade Kit for 27
    Part# 525-119
  • Sealed Pull Pin Kit
    Part# 525-210
  • Sealed Pull Pin Overhaul Kit
    Part# 525-211
  • Port Weight Kit for SL-27
    Part# 525-220
  • SL-27 Diamond Weight Retrofit Kit
    Part# 525-225
  • Regulator Rebuild Kit
    525-309 Regulator Rebuild Kit
    For Helmets & KMB-BandMasks® with the “A”/“B” or SuperFlow® 350 Regulator.
    Part# 525-309
  • Side Block Rebuild Kit
    Side Block Kit
    Part# 525-311
  • One Way Valve Kit
    One Way Valve Kit
    Part# 525-330
  • Helmet Spares Kit, SL 27
    Part# 525-333
  • SL 27® with 455 Regulator Soft Goods Overhaul Kit
    Part# 525-359
  • Soft Goods Overhaul Kit, SL 27
    Soft Goods Overhaul Kit, SL 27
    Part# 525-365
  • Regulator Tool Kit with Pouch
    Tool Kit with Pouch
    Part# 525-620
  • Chin Strap Assembly Kit
    Chin Strap Assembly Kit
    Part# 525-716
  • Head Cushion Foam Spacer (HCFS) Kit
    Part# 525-745
  • Replacement Foam Kit for 510-754 Head Cushion
    Part# 525-746
  • Tri-Valve Exhaust Kit for SL-27
    Tri-Valve Exhaust Kit
    Part# 525-755
  • Pull Strap Assembly Kit
    Part# 525-770
  • SuperFlow® 350 Regulator Assembly Kit
    Part# 525-771

SuperLite® 17C

click to view

Kits_SL17C

  • Manual 17C
    This is your operations and maintenance manual. It is a writable USB flash drive which enables you to add or subtract the manual PDF sections as they are updated or when you purchase new Kirby Morgan products.
  • Logbook w/ pen
  • Over Pressure Relief Valve

    The Kirby Morgan® Overpressure Relief Valve is factory adjusted to vent any time the pressure in the low pressure hose connecting the bailout bottle to your emergency valve exceeds 200 P.S.I. It is installed in any of the low pressure ports in the first stage regulator.

  • SuperFlow First Stage, No Hose
  • Helmet/Mask Bag

    Measurements: 16’’ length x 12’’ width x 16’’ height. Made of high quality, tough black nylon, encasing a light weight, white polyethylene foam that features low water absorption and is fairly rigid (good impact strength). The two grommeted ventilation holes seen in the photo are on both sides of the bag. A large elastic topped pocket is on each side, for holding tool kits, checklists, logbooks, spares, etc. (There are no inside pockets). The bag handles are 1” wide straps of black polyester webbing. The bag closes up with two, large YKK zippers. We do not recommend the 500-901 helmet bag as a shipping container or packaging for your Kirby Morgan life support equipment!

  • Swing Catch Retrofit Kit, 17C
    This catch allows the diver a quicker, easier removal of the helmet. As of January of 1996, this part is standard on all SL 17C helmets.
  • Restrictor Adapter

    The 555-210 Restrictor Adapter should be used when an inflation hose is attached to the side block when drysuit diving. The main purpose of the Restrictor Adapter is to limit gas flow in the event the hose ruptures or is severed, and to ensure the loss of supply would not be great enough to significantly affect the diver’s breathing at moderate to heavy work rates. It also helps prevent filling the dry suit too rapidly.


    NOTE: O-ring 310-003 is required to install the Restrictor Adaptor onto the side block.

Kirby Morgan® 97

click to view

Kits_KM97

  • Neck Ring Assembly
    Neck Ring Assembly, Small, S.S.
    Part# 505-745
  • Neck Ring Assembly
    Neck Ring Assembly, Medium, S.S.
    Part# 505-746
  • Neck Ring Assembly
    Neck Ring Assembly, Large, S.S.
    Part# 505-747
  • Neck Ring Assembly
    Neck Ring Assembly, X-L, S.S.
    Part# 505-749
  • Neck Dam, Small
    Neck Dam, Small
    Part# 510-627
  • Neck Dam, Medium (Standard)
    Neck Dam, Medium (Standard)
    Part# 510-628
  • Neck Dam, Large
    Neck Dam, Large
    Part# 510-629
  • Latex Neck Dam, Small/Medium
    Latex Neck Dam, Small/Medium
    Part# 510-631
  • Latex Neck Dam, Medium/Large
    Latex Neck Dam, Medium/Large
    Part# 510-633
  • Replacement Foam Set
    Part# 510-672
  • Cold Water Neck Dam, Medium
    Cold Water Neck Dam, Medium
    Part# 510-675
  • Cold Water Neck Dam, Large
    Cold Water Neck Dam, Large
    Part# 510-676
  • Chin Cushion
    Chin Cushion
    Part# 510-683
  • Neck Dam, X-Large
    Neck Dam, X-Large
    Part# 510-688
  • Latex Neck Dam, X-Large
    Latex Neck Dam, X-Large
    Part# 510-689
  • Oral Nasal Mask
    Oral Nasal Mask
    Part# 510-747
  • Head Cushion Assembly
    Head Cushion Assembly
    The fit of the head cushion is critical to both comfort and safety. The head cushion should be adjusted so that it assists in the proper seal of the oral nasal mask to the face. The head cushion is one out of a three part system. The Earphone holes are no longer present in the side pieces, but may be cut if the user prefers. The material is laser cut to prevent the edges from fraying or unraveling and has a handy loop attached to the liner for hanging and drying.
    Part# 510-754
  • Communication Assembly with Post
    Communication Assembly with Post
    Part# 515-023
  • Communications Assembly with MWPC
    Communications Assembly with MWPC
    Part# 515-024
  • Communications Kit for all Helmets and Band Masks
    Communications Kit for all Helmets and Band Masks
    Part# 515-033
  • Front Standoff Kit
    Part# 525-116
  • Sealed Pull Pin Overhaul Kit
    Part# 525-211
  • Side Block Rebuild Kit
    Side Block Rebuild Kit
    Part# 525-313
  • One Way Valve Kit
    One Way Valve Kit
    Part# 525-330
  • Soft Goods Kit, KM 97
    Part# 525-364
  • Helmet Spares Kit, KM 97
    Part# 525-370
  • Anode Kit, All SS Helmets
    Anode Kit, All SS Helmets
    Part# 525-375
  • 525-630 Tool Kit
    455 Regulator Tool Kit
    Part# 525-630
  • Replacement Foam Kit for 510-754 Head Cushion
    Part# 525-746
  • 455 Balanced Regulator Rebuild Kit
    Part# 525-767
  • Pull Strap Assembly Kit
    Part# 525-770

Kirby Morgan® 77

click to view

Kits_KM77

  • Neck Ring Assembly
    Neck Ring Assembly, Small, S.S.
    Part# 505-745
  • Neck Ring Assembly
    Neck Ring Assembly, Medium, S.S.
    Part# 505-746
  • Neck Ring Assembly
    Neck Ring Assembly, Large, S.S.
    Part# 505-747
  • Neck Ring Assembly
    Neck Ring Assembly, X-L, S.S.
    Part# 505-749
  • Neck Dam, Small
    Neck Dam, Small
    Part# 510-627
  • Neck Dam, Medium (Standard)
    Neck Dam, Medium (Standard)
    Part# 510-628
  • Neck Dam, Large
    Neck Dam, Large
    Part# 510-629
  • Latex Neck Dam, Small/Medium
    Latex Neck Dam, Small/Medium
    Part# 510-631
  • Latex Neck Dam, Medium/Large
    Latex Neck Dam, Medium/Large
    Part# 510-633
  • Replacement Foam Set
    Part# 510-672
  • Cold Water Neck Dam
    Cold Water Neck Dam, Small
    Part# 510-674
  • Cold Water Neck Dam, Medium
    Cold Water Neck Dam, Medium
    Part# 510-675
  • Cold Water Neck Dam, Large
    Cold Water Neck Dam, Large
    Part# 510-676
  • Chin Cushion
    Chin Cushion
    Part# 510-683
  • Neck Dam, X-Large
    Neck Dam, X-Large
    Part# 510-688
  • Latex Neck Dam, X-Large
    Latex Neck Dam, X-Large
    Part# 510-689
  • Oral Nasal Mask, 47/77
    Oral Nasal Mask, 47/77
    Part# 510-743
  • Head Cushion Assembly
    Head Cushion Assembly
    The fit of the head cushion is critical to both comfort and safety. The head cushion should be adjusted so that it assists in the proper seal of the oral nasal mask to the face. The head cushion is one out of a three part system. The Earphone holes are no longer present in the side pieces, but may be cut if the user prefers. The material is laser cut to prevent the edges from fraying or unraveling and has a handy loop attached to the liner for hanging and drying.
    Part# 510-754
  • Communication Assembly with Post
    Communication Assembly with Post
    Part# 515-023
  • Communications Assembly with MWPC
    Communications Assembly with MWPC
    Part# 515-024
  • Communications Kit for all Helmets and Band Masks
    Communications Kit for all Helmets and Band Masks
    Part# 515-033
  • Front Standoff Kit
    Part# 525-116
  • Sealed Pull Pin Overhaul Kit
    Part# 525-211
  • Regulator Rebuild Kit, KM 47 and 77
    Regulator Rebuild Kit, KM 47 and 77
    Part# 525-310
  • Side Block Rebuild Kit
    Side Block Rebuild Kit
    Part# 525-313
  • One Way Valve Kit
    One Way Valve Kit
    Part# 525-330
  • Anode Kit, All SS Helmets
    Anode Kit, All SS Helmets
    Part# 525-375
  • Soft Goods Overhaul Kit, KM 77
    Soft Goods Overhaul Kit, KM 77
    Part# 525-377
  • Helmet Spares Kit, KM 77
    Part# 525-378
  • Conversion Kit, 350 Regulator for KM 77
    Conversion Kit, 350 Regulator for KM 77
    Part# 525-385
  • Head Cushion Foam Spacer (HCFS) Kit
    Part# 525-745
  • Replacement Foam Kit for 510-754 Head Cushion
    Part# 525-746
  • KM 47-77 Regulator Tool Kit with Pouch
    Regulator Tool Kit with Pouch
    Part# 525-768
  • 455 Regulator
    Conversion Kit, 455 Regulator for KM 77
    Part# 525-769
  • Pull Strap Assembly Kit
    Part# 525-770
  • REX 47/77 Regulator Assembly Kit
    Part# 525-774

Kirby Morgan® 57

click to view

Kits_KM57

  • 505-120 Neck Ring Assembly, Small
    Neck Ring Assembly, Small
    Part# 505-090
  • Neck Ring Assembly
    Neck Ring Assembly, XL
    Part# 505-093
  • Latex Neck Ring Assembly
    Neck Ring Assembly, Latex, Medium-Large
    Part# 505-117
  • Latex Neck Ring Assembly
    Latex Neck Ring Assembly, Small–Medium
    Part# 505-118
  • Neck Ring Assembly
    Neck Ring Assembly, Medium
    Part# 505-119
  • Neck Ring Assembly
    Neck Ring Assembly, Large
    Part# 505-120
  • Neck Dam, Small
    Neck Dam, Small
    Part# 510-627
  • Neck Dam, Medium (Standard)
    Neck Dam, Medium (Standard)
    Part# 510-628
  • Neck Dam, Large
    Neck Dam, Large
    Part# 510-629
  • Latex Neck Dam, Small/Medium
    Latex Neck Dam, Small/Medium
    Part# 510-631
  • Latex Neck Dam, Medium/Large
    Latex Neck Dam, Medium/Large
    Part# 510-633
  • Replacement Foam Set
    Part# 510-672
  • Cold Water Neck Dam
    Cold Water Neck Dam, Small
    Part# 510-674
  • Cold Water Neck Dam, Medium
    Cold Water Neck Dam, Medium
    Part# 510-675
  • Cold Water Neck Dam, Large
    Cold Water Neck Dam, Large
    Part# 510-676
  • Chin Cushion
    Chin Cushion
    Part# 510-683
  • Neck Dam, X-Large
    Neck Dam, X-Large
    Part# 510-688
  • Latex Neck Dam, X-Large
    Latex Neck Dam, X-Large
    Part# 510-689
  • Oral Nasal Mask
    Oral Nasal Mask
    Part# 510-747
  • Head Cushion Assembly
    Head Cushion Assembly
    The fit of the head cushion is critical to both comfort and safety. The head cushion should be adjusted so that it assists in the proper seal of the oral nasal mask to the face. The head cushion is one out of a three part system. The Earphone holes are no longer present in the side pieces, but may be cut if the user prefers. The material is laser cut to prevent the edges from fraying or unraveling and has a handy loop attached to the liner for hanging and drying.
    Part# 510-754
  • Communication Assembly with Post
    Communication Assembly with Post
    Part# 515-023
  • Communications Assembly with MWPC
    Communications Assembly with MWPC
    Part# 515-024
  • Communications Kit for all Helmets and Band Masks
    Communications Kit for all Helmets and Band Masks
    Part# 515-033
  • Whisker Clamp Replacement Kit
    Whisker Clamp Replacement Kit
    Part# 525-032
  • Front Standoff Kit
    Part# 525-116
  • Sealed Pull Pin Overhaul Kit
    Part# 525-211
  • Soft Goods Overhaul Kit, KM 57
    525-217 Soft Goods Overhaul Kit for 57
    Part# 525-217
  • 525-218 Helmet Spares Kit for KM 57
    Part# 525-218
  • Side Block Rebuild Kit
    Side Block Kit
    Part# 525-311
  • One Way Valve Kit
    One Way Valve Kit
    Part# 525-330
  • SL 17C/K, KM 37 and 57 with 455 Regulator Soft Goods Overhaul Kit
    Part# 525-356
  • Chin Strap Assembly Kit
    Chin Strap Assembly Kit
    Part# 525-716
  • Regulator Rebuild Kit, SS Balanced
    Regulator Rebuild Kit, SS Balanced
    Part# 525-718
  • Head Cushion Foam Spacer (HCFS) Kit
    Part# 525-745
  • Replacement Foam Kit for 510-754 Head Cushion
    Part# 525-746
  • SuperFlow® 450 Regulator Parts Upgrade Kit
    Part# 525-757
  • Quad Valve Exhaust Kit
    Quad Valve Exhaust Kit
    Part# 525-759
  • Quad-Valve Cover Kit for SL-17A/B/C/K and 37
    Part# 525-762
  • Pull Strap Assembly Kit
    Part# 525-770

Kirby Morgan® 47

click to view

Kits_KM47

  • 505-120 Neck Ring Assembly, Small
    Neck Ring Assembly, Small
    Part# 505-090
  • Neck Ring Assembly
    Neck Ring Assembly, XL
    Part# 505-093
  • Latex Neck Ring Assembly
    Neck Ring Assembly, Latex, Medium-Large
    Part# 505-117
  • Latex Neck Ring Assembly
    Latex Neck Ring Assembly, Small–Medium
    Part# 505-118
  • Neck Ring Assembly
    Neck Ring Assembly, Medium
    Part# 505-119
  • Neck Ring Assembly
    Neck Ring Assembly, Large
    Part# 505-120
  • Neck Dam, Small
    Neck Dam, Small
    Part# 510-627
  • Neck Dam, Medium (Standard)
    Neck Dam, Medium (Standard)
    Part# 510-628
  • Neck Dam, Large
    Neck Dam, Large
    Part# 510-629
  • Latex Neck Dam, Small/Medium
    Latex Neck Dam, Small/Medium
    Part# 510-631
  • Latex Neck Dam, Medium/Large
    Latex Neck Dam, Medium/Large
    Part# 510-633
  • Replacement Foam Set
    Part# 510-672
  • Cold Water Neck Dam
    Cold Water Neck Dam, Small
    Part# 510-674
  • Cold Water Neck Dam, Medium
    Cold Water Neck Dam, Medium
    Part# 510-675
  • Cold Water Neck Dam, Large
    Cold Water Neck Dam, Large
    Part# 510-676
  • Chin Cushion
    Chin Cushion
    Part# 510-683
  • Neck Dam, X-Large
    Neck Dam, X-Large
    Part# 510-688
  • Latex Neck Dam, X-Large
    Latex Neck Dam, X-Large
    Part# 510-689
  • Oral Nasal Mask, 47/77
    Oral Nasal Mask, 47/77
    Part# 510-743
  • Head Cushion Assembly
    Head Cushion Assembly
    The fit of the head cushion is critical to both comfort and safety. The head cushion should be adjusted so that it assists in the proper seal of the oral nasal mask to the face. The head cushion is one out of a three part system. The Earphone holes are no longer present in the side pieces, but may be cut if the user prefers. The material is laser cut to prevent the edges from fraying or unraveling and has a handy loop attached to the liner for hanging and drying.
    Part# 510-754
  • Communication Assembly with Post
    Communication Assembly with Post
    Part# 515-023
  • Communications Assembly with MWPC
    Communications Assembly with MWPC
    Part# 515-024
  • Communications Kit for all Helmets and Band Masks
    Communications Kit for all Helmets and Band Masks
    Part# 515-033
  • Front Standoff Kit
    Part# 525-116
  • Sealed Pull Pin Overhaul Kit
    Part# 525-211
  • Regulator Rebuild Kit, KM 47 and 77
    Regulator Rebuild Kit, KM 47 and 77
    Part# 525-310
  • Side Block Rebuild Kit
    Side Block Kit
    Part# 525-311
  • One Way Valve Kit
    One Way Valve Kit
    Part# 525-330
  • Soft Goods Overhaul Kit, KM 47
    Soft Goods Overhaul Kit, KM 47
    Part# 525-368
  • Helmet Spares Kit, KM 47
    Part# 525-371
  • Chin Strap Assembly Kit
    Chin Strap Assembly Kit
    Part# 525-716
  • Head Cushion Foam Spacer (HCFS) Kit
    Part# 525-745
  • Replacement Foam Kit for 510-754 Head Cushion
    Part# 525-746
  • REX® Whisker Exhaust Kit
    Part# 525-764
  • KM 47-77 Regulator Tool Kit with Pouch
    Regulator Tool Kit with Pouch
    Part# 525-768
  • Pull Strap Assembly Kit
    Part# 525-770
  • REX 47/77 Regulator Assembly Kit
    Part# 525-774

Kirby Morgan® 37SS

click to view

Kits_KM37SS

  • Neck Ring Assembly
    Neck Ring Assembly, Small, S.S.
    Part# 505-745
  • Neck Ring Assembly
    Neck Ring Assembly, Medium, S.S.
    Part# 505-746
  • Neck Ring Assembly
    Neck Ring Assembly, Large, S.S.
    Part# 505-747
  • Neck Ring Assembly
    Neck Ring Assembly, X-L, S.S.
    Part# 505-749
  • Neck Dam, Small
    Neck Dam, Small
    Part# 510-627
  • Neck Dam, Medium (Standard)
    Neck Dam, Medium (Standard)
    Part# 510-628
  • Neck Dam, Large
    Neck Dam, Large
    Part# 510-629
  • Latex Neck Dam, Small/Medium
    Latex Neck Dam, Small/Medium
    Part# 510-631
  • Latex Neck Dam, Medium/Large
    Latex Neck Dam, Medium/Large
    Part# 510-633
  • Replacement Foam Set
    Part# 510-672
  • Cold Water Neck Dam
    Cold Water Neck Dam, Small
    Part# 510-674
  • Cold Water Neck Dam, Medium
    Cold Water Neck Dam, Medium
    Part# 510-675
  • Cold Water Neck Dam, Large
    Cold Water Neck Dam, Large
    Part# 510-676
  • Chin Cushion
    Chin Cushion
    Part# 510-683
  • Neck Dam, X-Large
    Neck Dam, X-Large
    Part# 510-688
  • Latex Neck Dam, X-Large
    Latex Neck Dam, X-Large
    Part# 510-689
  • Oral Nasal Mask
    Oral Nasal Mask
    Part# 510-747
  • Head Cushion Assembly
    Head Cushion Assembly
    The fit of the head cushion is critical to both comfort and safety. The head cushion should be adjusted so that it assists in the proper seal of the oral nasal mask to the face. The head cushion is one out of a three part system. The Earphone holes are no longer present in the side pieces, but may be cut if the user prefers. The material is laser cut to prevent the edges from fraying or unraveling and has a handy loop attached to the liner for hanging and drying.
    Part# 510-754
  • Communication Assembly with Post
    Communication Assembly with Post
    Part# 515-023
  • Communications Assembly with MWPC
    Communications Assembly with MWPC
    Part# 515-024
  • Communications Kit for all Helmets and Band Masks
    Communications Kit for all Helmets and Band Masks
    Part# 515-033
  • Regulator Flange Kit
    Part# 525-027
  • Whisker Clamp Replacement Kit
    Whisker Clamp Replacement Kit
    Part# 525-032
  • Front Standoff Kit
    Part# 525-116
  • Sealed Pull Pin Overhaul Kit
    Part# 525-211
  • Regulator Rebuild Kit
    525-309 Regulator Rebuild Kit
    For Helmets & KMB-BandMasks® with the “A”/“B” or SuperFlow® 350 Regulator.
    Part# 525-309
  • Side Block Rebuild Kit
    Side Block Rebuild Kit
    Part# 525-313
  • One Way Valve Kit
    One Way Valve Kit
    Part# 525-330
  • Anode Kit, All SS Helmets
    Anode Kit, All SS Helmets
    Part# 525-375
  • Soft Goods Overhaul Kit, KM 37SS
    Soft Goods Overhaul Kit, KM 37SS
    Part# 525-380
  • Helmet Spares Kit, KM 37SS
    Part# 525-381
  • Conversion Kit, REX Regulator for 37SS
    Part# 525-395
  • Regulator Tool Kit with Pouch
    Tool Kit with Pouch
    Part# 525-620
  • Head Cushion Foam Spacer (HCFS) Kit
    Part# 525-745
  • Replacement Foam Kit for 510-754 Head Cushion
    Part# 525-746
  • Pull Strap Assembly Kit
    Part# 525-770
  • SuperFlow® 350 Regulator Assembly Kit
    Part# 525-771

Kirby Morgan® 37

click to view

Kits_KM37

  • 505-120 Neck Ring Assembly, Small
    Neck Ring Assembly, Small
    Part# 505-090
  • Neck Ring Assembly
    Neck Ring Assembly, XL
    Part# 505-093
  • Latex Neck Ring Assembly
    Neck Ring Assembly, Latex, Medium-Large
    Part# 505-117
  • Latex Neck Ring Assembly
    Latex Neck Ring Assembly, Small–Medium
    Part# 505-118
  • Neck Ring Assembly
    Neck Ring Assembly, Medium
    Part# 505-119
  • Neck Ring Assembly
    Neck Ring Assembly, Large
    Part# 505-120
  • Neck Dam, Small
    Neck Dam, Small
    Part# 510-627
  • Neck Dam, Medium (Standard)
    Neck Dam, Medium (Standard)
    Part# 510-628
  • Neck Dam, Large
    Neck Dam, Large
    Part# 510-629
  • Latex Neck Dam, Small/Medium
    Latex Neck Dam, Small/Medium
    Part# 510-631
  • Latex Neck Dam, Medium/Large
    Latex Neck Dam, Medium/Large
    Part# 510-633
  • Replacement Foam Set
    Part# 510-672
  • Cold Water Neck Dam
    Cold Water Neck Dam, Small
    Part# 510-674
  • Cold Water Neck Dam, Medium
    Cold Water Neck Dam, Medium
    Part# 510-675
  • Cold Water Neck Dam, Large
    Cold Water Neck Dam, Large
    Part# 510-676
  • Chin Cushion
    Chin Cushion
    Part# 510-683
  • Neck Dam, X-Large
    Neck Dam, X-Large
    Part# 510-688
  • Latex Neck Dam, X-Large
    Latex Neck Dam, X-Large
    Part# 510-689
  • Oral Nasal Mask
    Oral Nasal Mask
    Part# 510-747
  • Head Cushion Assembly
    Head Cushion Assembly
    The fit of the head cushion is critical to both comfort and safety. The head cushion should be adjusted so that it assists in the proper seal of the oral nasal mask to the face. The head cushion is one out of a three part system. The Earphone holes are no longer present in the side pieces, but may be cut if the user prefers. The material is laser cut to prevent the edges from fraying or unraveling and has a handy loop attached to the liner for hanging and drying.
    Part# 510-754
  • Communication Assembly with Post
    Communication Assembly with Post
    Part# 515-023
  • Communications Assembly with MWPC
    Communications Assembly with MWPC
    Part# 515-024
  • Communications Kit for all Helmets and Band Masks
    Communications Kit for all Helmets and Band Masks
    Part# 515-033
  • Regulator Flange Kit
    Part# 525-027
  • Whisker Clamp Replacement Kit
    Whisker Clamp Replacement Kit
    Part# 525-032
  • Front Standoff Kit
    Part# 525-116
  • Sealed Pull Pin Overhaul Kit
    Part# 525-211
  • Regulator Rebuild Kit
    525-309 Regulator Rebuild Kit
    For Helmets & KMB-BandMasks® with the “A”/“B” or SuperFlow® 350 Regulator.
    Part# 525-309
  • Side Block Rebuild Kit
    Side Block Kit
    Part# 525-311
  • One Way Valve Kit
    One Way Valve Kit
    Part# 525-330
  • Helmet Spares Kit, SL 17K and KM 37
    Part# 525-347
  • SL 17C/K, KM 37 and 57 with 455 Regulator Soft Goods Overhaul Kit
    Part# 525-356
  • Soft Goods Overhaul Kit, SL 17C, 17K and KM 37
    Soft Goods Overhaul Kit, SL 17C, 17K and KM 37
    Part# 525-363
  • Regulator Tool Kit with Pouch
    Tool Kit with Pouch
    Part# 525-620
  • Chin Strap Assembly Kit
    Chin Strap Assembly Kit
    Part# 525-716
  • Head Cushion Foam Spacer (HCFS) Kit
    Part# 525-745
  • Replacement Foam Kit for 510-754 Head Cushion
    Part# 525-746
  • Tri-Valve® Exhaust Kit
    Tri-Valve® Exhaust Kit
    Part# 525-752
  • Quad Valve Exhaust Kit
    Quad Valve Exhaust Kit
    Part# 525-759
  • Quad-Valve Cover Kit for SL-17A/B/C/K and 37
    Part# 525-762
  • Pull Strap Assembly Kit
    Part# 525-770
  • SuperFlow® 350 Regulator Assembly Kit
    Part# 525-771

BandMask 28®

click to view

kits_KMB28

  • Standard Hood, Foam Seal
    Part# 510-712
  • Communications Kit for all Helmets and Band Masks
    Communications Kit for all Helmets and Band Masks
    Part# 515-033
  • Terminal Block Kit
    Part# 515-061
  • Regulator Flange Kit
    Part# 525-027
  • Whisker Clamp Replacement Kit
    Whisker Clamp Replacement Kit
    Part# 525-032
  • Bandkeeper Kit - NO Hood
    Bandkeeper Kit - NO Hood
    Part# 525-121
  • Hood and Band Keeper Kit for KMB® 18/28
    Hood and Band Keeper Kit for KMB® 18/28
    Part# 525-172
  • Side Block Rebuild Kit
    Side Block Kit
    Part# 525-311
  • Mask Spares Kit, KMB® 18/28
    Part# 525-319
  • One Way Valve Kit
    One Way Valve Kit
    Part# 525-330
  • Soft Goods Overhaul Kit, KMB® 18/28
    Part# 525-358
  • KMB® 18/28 with 455 Regulator Soft Goods Overhaul Kit
    Part# 525-367
  • Anode Kit For The KMB 18/28
    Anode Kit For The KMB 18/28
    Part# 525-373
  • Foam Face Seal Kit
    Foam Face Seal Kit
    Part# 525-505
  • Regulator Tool Kit with Pouch
    Tool Kit with Pouch
    Part# 525-620
  • Molded face Seal
    KMB® Molded Face Seal Replacement Kit
    Part# 525-725
  • Hood and Face Seal
    KMB® 28 Hood and Face Seal (S/S)
    Part# 525-730
  • Hood and Face Seal
    KMB® 28 Hood and Face Seal (S/M)
    Part# 525-731
  • Hood and Face Seal
    KMB® 28 Hood and Face Seal (L/M)
    Part# 525-732
  • Hood and Face Seal
    KMB® 28 Hood and Face Seal (L/L)
    Part# 525-733
  • Tri-Valve® Exhaust Kit
    Tri-Valve® Exhaust Kit
    Part# 525-752
  • SuperFlow® 350 Regulator Assembly Kit
    Part# 525-771

BandMask 18®

click to view

Kits_KMB18

  • Standard Hood, Foam Seal
    Part# 510-712
  • Communications Kit for all Helmets and Band Masks
    Communications Kit for all Helmets and Band Masks
    Part# 515-033
  • Terminal Block Kit
    Part# 515-061
  • Regulator Flange Kit
    Part# 525-027
  • Whisker Clamp Replacement Kit
    Whisker Clamp Replacement Kit
    Part# 525-032
  • Insert Testing Block Kit
    Part# 525-115
  • Bandkeeper Kit - NO Hood
    Bandkeeper Kit - NO Hood
    Part# 525-121
  • Hood and Band Keeper Kit for KMB® 18/28
    Hood and Band Keeper Kit for KMB® 18/28
    Part# 525-172
  • Regulator Rebuild Kit
    525-309 Regulator Rebuild Kit
    For Helmets & KMB-BandMasks® with the “A”/“B” or SuperFlow® 350 Regulator.
    Part# 525-309
  • Side Block Rebuild Kit
    Side Block Kit
    Part# 525-311
  • Mask Spares Kit, KMB® 18/28
    Part# 525-319
  • One Way Valve Kit
    One Way Valve Kit
    Part# 525-330
  • Soft Goods Overhaul Kit, KMB® 18/28
    Part# 525-358
  • KMB® 18/28 with 455 Regulator Soft Goods Overhaul Kit
    Part# 525-367
  • Anode Kit For The KMB 18/28
    Anode Kit For The KMB 18/28
    Part# 525-373
  • Foam Face Seal Kit
    Foam Face Seal Kit
    Part# 525-505
  • Regulator Tool Kit with Pouch
    Tool Kit with Pouch
    Part# 525-620
  • Molded face Seal
    KMB® Molded Face Seal Replacement Kit
    Part# 525-725
  • Hood and Face Seal
    KMB® 18 Hood and Face Seal (S/S)
    Part# 525-734
  • Hood and Face Seal
    KMB® 18 Hood and Face Seal (S/M)
    Part# 525-735
  • Hood and Face Seal
    KMB® 18 Hood and Face Seal (L/M)
    Part# 525-736
  • Hood and Face Seal
    KMB® 18 Hood and Face Seal (L/L)
    Part# 525-737
  • Tri-Valve® Exhaust Kit
    Tri-Valve® Exhaust Kit
    Part# 525-752
  • SuperFlow® 350 Regulator Assembly Kit
    Part# 525-771
  • ‘A’ Regulator Assembly Kit
    Part# 525-777