Home > Support > Bulletins > Bulletin # 15 of 2005

Bulletin # 15 of 2005

Interior Title: 
Bulletin # 15 of 2005
Title Type: 
Change to Product
Bulletin Date: 
Bulletin # 15 of 2005. October 3, 2005
Bulletin Type: 
Change to Product Bulletin
Bulletin Subject: 
New Fasteners
Products Affected: 
Kirby Morgan® Helmets and Masks Part Numbers 530-035, 530-040, 530-045

KMDSI has begun switching as many of the fasteners on our helmets and masks as possible to “combo” head screws. You’ve probably seen these screws in other applications, they’re the ones that allow you to use either a Phillips head or slotted screwdriver to adjust them. Of course, you should use a torque screwdriver to tighten these fasteners wherever specified torques are called out in the applicable KMDSI manual. The Combo screws that we have sourced to date include the following part numbers:530-035 which is used on the port retainer on all current KMDSI helmets

530-045 which is used to secure the front of the handle and on the Whiskers® on all current KMDSI helmets

530-040 which is used to secure the port weight on the SuperLite® 17B, all BandMask® BandKeepers®, and KMACS-5 internal fasteners.

These stainless steel fasteners meet our specifications for thread pitch, corrosion resistance, and durability. They will make it faster and easier for all technicians to perform maintenance on Kirby Morgan® products.

Bulletin 15 of 2005

Combo screws are now being used on the port retainer, whiskers, and front of the handle on all Kirby Morgan helmets.