Home > Products > Spares

Spares

17B Header

Spares Kits Main

EXO-BR® Masks

click to view

Kits_EXO-BR

  • Manual EXO® 26, All Models
    This is your operations and maintenance manual. It is a writable USB flash drive which enables you to add or subtract the manual PDF sections as they are updated or when you purchase new Kirby Morgan products.
  • EXO-26 Balanced Regulator Full Face Mask User Guide
  • Big Bore (5/16”) Scuba Hose, LP, 29”
  • Manifold Block
    The Manifold Block Assembly provides a control point for your bailout supply when using a light weight full face mask like the EXO® Mask. It is equipped with four low pressure outlets and a check valve. It is available with a 9/16" O2 fitting or a #6 JIC fitting, or a standard SCUBA fitting.
  • Manifold Block
    The Manifold Block Assembly provides a control point for your bailout supply when using a light weight full face mask like the EXO® Mask. It is equipped with four low pressure outlets and a check valve. It is available with a 9/16" O2 fitting or a #6 JIC fitting, or a standard SCUBA fitting.
  • Manifold Block
    The Manifold Block Assembly provides a control point for your bailout supply when using a light weight full face mask like the EXO® Mask. It is equipped with four low pressure outlets and a check valve. It is available with a 9/16" O2 fitting or a #6 JIC fitting, or a standard SCUBA fitting.
  • Hi Flow Air Inlet Swivel
    The high flow swivel allows the regulator hose to move freely and align with the mask without put-ting stress on the hose coupling. It uses standard SCUBA threads for incoming breathing air. The Inlet Swivel is CE approved for the M-48 with CE approved regulators. The Inlet Swivel is provided with masks that are sold with a Kirby Morgan® second stage regulator.
  • Brush, Inlet Tube
  • Standard Scuba Hose, LP, 26”
  • Restrictor Adapter

    The 555-210 Restrictor Adapter should be used when an inflation hose is attached to the side block when drysuit diving. The main purpose of the Restrictor Adapter is to limit gas flow in the event the hose ruptures or is severed, and to ensure the loss of supply would not be great enough to significantly affect the diver’s breathing at moderate to heavy work rates. It also helps prevent filling the dry suit too rapidly.


    NOTE: O-ring 310-003 is required to install the Restrictor Adaptor onto the side block.

M-48 MOD 1

click to view

  • 200-125 Balanced SCUBA Regulator Assembly for M-48 SuperMask® and MOD-1
    Balanced SCUBA Regulator Assembly for M-48 SuperMask® and MOD-1
    Part# 200-125
  • Scuba Pod Assy, with Balanced Scuba Reg
    Part# 200-130
  • Overpressure Relief Valve Rebuild Kit
    Part# 225-017
  • Balanced SCUBA Regulator rebuild Kit
    Part# 225-120
  • SCUBA Pod Assembly with Tilt-to-Purge
    Part# 805-015
  • 805-026 SCUBA Pod Assembly with Balance Purge Tube
    SCUBA Pod Assembly with Balance Purge Tube
    Part# 805-026
  • T-Bit Pod Basic Maintenance Kit
    Part# 825-005
  • Rebreather Pod Regulator Overhaul Kit
    Part# 825-010
  • Rebreather Pod Soft Goods Overhaul Kit
    Part# 825-015
  • Rebreather Pod with Switchover Regulator Annual Overhaul Kit
    Part# 825-025
  • Overseas Spares Kit for M-48
    Part# 825-028
  • Switchover Regulator Kit
    Part# 825-030
  • 825-070 (S/M) and 825-075 (L/XL) M-48 MOD-1 Hood Assembly with Bib Kit
    M-48 MOD-1 Hood Assembly with Bib Kit
    Part# 825-070

SuperMask® M-48

click to view

  • 200-125 Balanced SCUBA Regulator Assembly for M-48 SuperMask® and MOD-1
    Balanced SCUBA Regulator Assembly for M-48 SuperMask® and MOD-1
    Part# 200-125
  • Scuba Pod Assy, with Balanced Scuba Reg
    Part# 200-130
  • Overpressure Relief Valve Rebuild Kit
    Part# 225-017
  • Balanced SCUBA Regulator rebuild Kit
    Part# 225-120
  • SCUBA Pod Assembly with Tilt-to-Purge
    Part# 805-015
  • 805-026 SCUBA Pod Assembly with Balance Purge Tube
    SCUBA Pod Assembly with Balance Purge Tube
    Part# 805-026
  • T-Bit Pod Basic Maintenance Kit
    Part# 825-005
  • Rebreather Pod Regulator Overhaul Kit
    Part# 825-010
  • Rebreather Pod Soft Goods Overhaul Kit
    Part# 825-015
  • Rebreather Pod with Switchover Regulator Annual Overhaul Kit
    Part# 825-025
  • Overseas Spares Kit for M-48
    Part# 825-028
  • Switchover Regulator Kit
    Part# 825-030
  • Metal/Plastic Buckle Assembly Kit
    Metal/Plastic Buckle Assembly Kit
    Part# 825-040
  • Metal/Plastic Buckle Assembly Kit
    Metal Buckle Assembly Kit
    Part# 825-041